Search the Community
Showing results for tags 'hd pod'.
Hi all, I know there has been plenty written by us customers about having a schematic of the routing through the "dream rig" and I can somewhat understand why that is difficult for Line6 to do, because there is so much software configurability and DSP areas in the process, it is almost like asking how long is a piece of string... However, I am looking into DT25 for my GIG rig and I am currently confused about how/where "post amp block" effects sit within the signal chain, bearing in mind a specific configuration... (as below) HD POD config looks like... Pre Section - Split path section - mixer block - post section - outputs (generic pod setup) for this discussion lets say it is effectively a mono path, so lets not talk about "panning or stereo" and so on... just keeping it "simple".. in the pre section is FX1 in the Split path (path a) i have FX2 followed by an AMP block (amp configured as a Pre version of the amp) in post section i have FX3. if I then set the "Audio Configuration" for the DT25 to be LEFT... then from the documents I understand it gets fed the signal from the end of the POD chain into the real POWER AMP (with topology/class etc. as configured by the pre amp specifics)... (I also understand that if I set the Audio Configuration to AMP A... the signal would go straight after the amp block to the power amp, and miss out the POST section and MIXER completely...(and incidently any FX placed after the amp block...) MY REAL QUESTION... is it possible to use the DT25 as the pre amp modeller and real power amp AND get the same FX placement (without using the 4CM)? e.g. POD config FX1 - FX2 - blank amp block - FX3 audio path would have to be POD(FX1 - FX2) - > DT25 preamp -> POD (FX3) -> DT25 power amp - DT25 reverb... another side question is does the audio ever "go back to the POD from the DT25..." im guessing not, and if so my answer to my real question is... it's not possible... Interested in anyones thoughts.
I play guitar at home as a hohby. I have an old Spider III 30 watt amp and am looking at options for upgrading my sound. Would there be any drawbacks (such as fidelity) to feeding the output of a POD HD into the line input (CD/MP3) in the front of my Spider, which I assume is designed to be uncolored, which is what I'd want? Has anyone tried this? Any thoughts?