Search the Community
Showing results for tags 'issue'.
-
Does anyone else have the issue of glitchy unreliable footswitches on the Helix? I've had two units The first had 4 unreliable foot switches after a month of use at home.. And after 6 months or so the joystick failed totally so the store got me a new unit. That one now has 2 unreliable footswitches... problably more to come. I'm really taking good care of the unit, so I'm left to think there is a general quality issue with these footswitches. However Line6 Support tells me otherwise: Hi there, sorry for the trouble with your Helix. The defective switch needs to be replaced by our service center. Therefore please contact your Line 6 reseller from where you've purchased the unit - or alternatively you have the option to contact our Danish service center directly: Highend Skjulhöjalle 57 Vanløse, 2720 +4538711114 info@highendmusik.dk We haven't received many requests regarding footswitch failures and the repair should solve the issue. Nonetheless I will pass along this information to the product teams, so they can look into it. Best regards xxxxx Technical Support Line 6 Support Europe And I don't really want to pay for repairs of a lollipop quality component, in an otherwise nice product.. Am I really one of few having this issue?
-
Hey guys, my POD Farm 2 is constantly freezing after a few minutes of playing. I've tried it with the compatibiliy manager already, restarting the pc, checking out the licence monkey, i even installed it on another PC to see if the problem was my laptop, but it didn't change. I use Windows 10 Pro. The program just suddenly freezes, as well as the lights and signal of the device (I'm using the UX2) and sometimes the freeze comes with a scratchy or even high, distorted and loud noise. It's still possible to click around in the POD Farm - for example it also keeps working for a moment if i just change the input from "Mic" to "Instrument" for example. So it's not exactly the program freezing, but the function. I don't know. Does anyone have the same issue? I've tried to find answers here in the forum but couldn't find any. Please let me know if you have any guesses!! I really need that stuff to work out asap.. :/ Thank you! -
So I recently got a Variax limited and have been using it for a few weeks now, today I go to plug it in and there’s nothing. So I check the battery and found that it wasn’t charged so I charged it, I come back and try it and still nothing. The magnetics work but the modelling doesn’t, I tried with a battery and 1/4 cable, I tried with a battery and a variax cable, and without a battery and a variax cable, still none of the modelling works, and the magnetics don’t work through the variax cable like usual, basically everything variax has stopped working. I’ve never had this happen and the instrument is still new, I don’t remember anything weird happening, as far as I remember I played it last night just fine with the modelling. What can I do to try and fix this and what can I do to try and diagnose the problem? thanks so much in advance! to note: workbench hd is also not recognising the guitar.
-
Hello everyone. So, i use sonic port vx on windows 10, i never had problems but lately when i use micro to record or stream he makes robotic voice, i mean he distort/crackling my voice. When i unplug usb cable and put it again he work about 5/6 min and the same happens. I have ASIO drivers installed, and try many fixes: I Update ASIO drivers I reinstall ASIO drivers Update windows(windows update) I disable all other devices (record) and put sonic port main microphone I disable microphone enchantments on windows Disable all sound effects I put the windows service (audiodg.exe) high priority I have no idea if the problem is in the micro or in windows Someone help!?!? Thanks a lot
-
So, I bought a Vetta 1 combo today and it was working perfectly in the store. I brought I home and plugged it in and was presented with this (see image) the screen looks garbled and wonky. I took it back to the store because they have a 60 day warranty on used items and i won’t have it back for about 2 weeks. Does anybody know anything about this? I thought it had something to do with the internal battery but I just want to see if anyone here knows anything about this.
-
Hello, bought a brand new HX Stomp. It won't connect to my pc (Windows 7 x64). Problems found: - USB Audio Device has a driver problem. - HX Stomp doesn't have a driver. Are the driver available for download somewhere? None of the software provided, in the Downloads section of Line6's webpage, are able to "see" my HX Stomp.
-
So recently purchased my AT2035 and Line 6 UX2. While I have some knowledge of audio interfaces, I find myself a bit lost when it comes to my microphone's specific issue. I have found that the microphone levels are very low and even with a volume boost it sounds rather low quality. I have tested my mic with no presets and it sounds very quiet reaching only roughly around -25 db. I have also tested various presets and have found using the default studio vocal preset to be the best; a bit louder, but still very quiet. It may also be important to note that the Mic 1/L Gain is in this position: Below I have posted screenshots of my UX2 audio interface and have given a small audio sample. The first half of the audio file is with no pre-amps or effects added and the second half contains the default studio vocal preset. I still believe the mic to be too quiet and am at a loss as to what is causing this. Any help is greatly appreciated! Mic.mp3
-
Hello, Just wanted to communicate this issue to anyone else who may experience it. I started to feel slight electric shocks through my guitar strings and on the metal stomp buttons on my Pod HD500X. After doing some troubleshooting, I found that it was the USB port on my computer that somehow got bent and was causing the electric shock. When I switched the USB cable to another port on my computer, the shock went away completely. Before you take it in to get repaired, give this a shot and see if it works. EDIT: I have also been told by a guitar tech that incorrect grounding in your guitar can cause this problem. Try using another guitar with your pod to see if you experience the shock. If you do not, it is probably the guitar
-
I just started my 15 days trial today and I mostly like this software but seriously, why is the input meter so glitchy? Output meter too. Compared to my DAW's (REAPER) meters, Helix Native's meter sometimes simply "doesn't notice" I just played a note, and when it does, it's some random level. Also the little bar that marks the highest volume reached sometimes just doesn't appear. Honestly looks like a bug. It's just barely usable to set the input gain. Or is it just me? Running on Windows 10, VST3.
-
Line 6 monkey downloads driver but after it is installed, device is still blinking red lamps meaning it can't be used and it is not detected as valid output. When I starting monkey again it show that driver not installed. 5th time in a row it fakes installations, and shows driver is not installed. Every time drivers says that all ok continue, finish. -
So I just bought a Pod HD500X and it has this problem that many people seem to be having with it. Often, it will reboot itself randomly over and over again until I unplug it or, occasionally, until I stop playing. I am using the provided power supply and not only have I tried other 500x power supplies but I went to guitar center and bought a new one and it's doing the same thing. Basically I haven't seen this problem resolved so I'm posting this hoping to figure out a solution for everybody who's struggling with these faulty Pods. Notes: I've rebooted myself, holding down the left arrow while plugging in power, to no avail. I've tried updating using Line 6 monkey, but it doesn't show up in the list of devices.
-
Hi. I found some issues in my Line 6 Spider 240HC amp that probably have other discussions opened, but i decided to record them. https://youtu.be/67unAeUulCA In the first one, the display flashes when it's turned off. https://youtu.be/477VH-TT4W8 That sound happens when i turn off the amp. That happens sometimes using different IEC cables. https://youtu.be/Fy6RwlY-xHk This problem started when i changed my IEC cable too. Sorry for the sound quality, there is a clicking sound when i activate the reverb. I though the it could be caused by the cable, but they are universal and i guess that it could be produced by digital issues. I really like this amp but it's difficult to play a gig calmed with that kind of problems. Is anyone having these problems? Sorry for my english.
-
The spider V 60 DSP (2017) appears to be a source of failure with an outrageous cost to replace the sub board _ more than the unit is worth - with No support or return !! what sort of Customer product Support is this??? The repair Centre admits it's not economic to repair at all disgusted !! steve
-
My amplifi tt die after an update to 2.61.0 firmware. When power on, only tone A lights. I trie to factory reset holding master volumen and tone buttons, but nothing, I try everithing that I found on line 6 forums, but nothings work... trash it?.. Thanks
-
Desplázate hacia abajo para ver las instrucciones en español. Faites défiler la page vers le bas pour trouver des instructions en français. Anweisungen auf Deutsch finden Sie weiter unten. Per le istruzioni in Italiano scorrete verso il basso. Overview: For those who have access to a Spider V (MKI or MKII) amp and wish to update the G10T Transmitter, it must be done in the order shown below (first update the amp, then the G10). We strongly suggest updating the amp with the latest version of the Line 6 Updater from a desktop/laptop computer, even though it is possible to update the amp from a mobile device. Video Tutorial: Updating a Relay-Ready Spider V Amp and G10T Transmitter With a Mac Computer Video Tutorial: Updating a Relay-Ready Spider V Amp and G10T Transmitter With a Windows Computer I. Update the Spider V Amp Firmware With a Computer First, (for Windows users) download and install the Spider V drivers Go to Line6.com and click on "Support" Select "Downloads" and set the three pulldown windows under "Free Software Downloads" to: [Spider V 60], [Line 6 Drivers], [your PC OS] Click "GO" The page will update with the Line 6 drivers for the Spider V. Click 'GET DOWNLOAD' to download the driver installer to your computer. Log in to your free Line 6 User account (or create a new account) Click on 'ACCEPT AND DOWNLOAD' and follow the instructions to save the driver installer When the installer has been downloaded, double-click on it and follow the instructions to install it in your computer Next, download and install the Line 6 Updater for Spider V Go to Line6.com and click on "Support" Select "Downloads" and set the three pulldown windows under"Free Software Downloads" to: [spider V 30], [Line 6 Updater], [your Mac or PC OS] Click "GO" The page will update with the Line 6 Updater for the Spider V. Click 'GET DOWNLOAD' to download the updater program to your computer. Click on 'ACCEPT AND DOWNLOAD' and follow the instructions to save the updater installer When the program has been downloaded, double-click on it and follow the instructions to install it in your computer Lastly, update the Spider V amp Connect the Spider V’s USB port to your computer with a traditional USB cable Slide the "SELECT" switch to the USB port labeled Mac/PC Turn the amp on Open the Line 6 Updater application and sign in with your Line 6 User Account Click on the Spider V amp Click the “Update” button next to the latest firmware version at the top Follow the prompts to begin the update process Do not turn off or unplug your Spider V or computer during the update Watch for the update status to be completed on the Spider V LCD. Once completed, the amp will restart. Disconnect and reconnect the USB cable, then repeat the process for the G10T Transmitter Note: If you experience a failed update or your amp locks up during boot up, you can hold down the Amp and FX buttons to enter Update Mode. Once it's in Update Mode, attempt the update procedure again. II. Update the G10T Firmware with the Spider V Amp Make sure the Spider V amp is still connected to the computer, and that the computer is still connected to the internet Insert the G10T all the way into the Spider's Input jack Ensure that the "SELECT" switch is still engaged with the USB port labeled "Mac/PC". Turn on your Spider amp if it's off. Run the Line 6 Updater program. Sign in to your Line 6 User Account. Click on “Relay G10T” Click the “Update” button next to the latest firmware version. Follow the prompts to begin the update process. Important: Do not turn off or unplug your Spider V amp or computer during the update. The Updater will say the amp is resetting, but take note of the amp's display, as it will continue updating, ultimately showing "Part 1 of 1 100% Updating Transmttr". The amp will reset itself, ending the update process. Cómo actualizar el firmware del transmisor G10 mediante los amplificadores Spider V Descripción general: Aquellos usuarios que dispongan de un amplificador Spider V (MKI o MKII) y deseen actualizar el transmisor G10T, el proceso debe realizarse en el orden indicado a continuación (primero actualizar el amplificador y luego el G10). Recomendamos encarecidamente actualizar el amplificador con la última versión del Line 6 Updater desde un ordenador de sobremesa/portátil, aunque puede hacerse desde un dispositivo móvil. Tutorial en vídeo: Actualizar un transmisor G10T y un amplificador Spider V compatible con Relay con un ordenador Mac Tutorial en vídeo: Actualizar un transmisor G10T y un amplificador Spider V compatible con Relay con un ordenador Windows I. Actualizar el firmware del amplificador Spider V con un ordenador En primer lugar, (para usuarios de Windows) descarga e instala los controladores del Spider V Visita Line6.com y haz clic en [Soporte] Selecciona “Downloads” y, en las tres ventanas desplegables de “Free Software Downloads”, selecciona “Spider V 60”, “Line 6 Drivers”, “el sistema operativo de tu PC”. Haz clic en [GO]. La página se actualizará con los controladores de Line 6 para el Spider V. Haz clic en [GET DOWNLOAD] para descargar el instalador del controlador en tu ordenador. Inicia sesión en tu cuenta de usuario gratuita de Line 6 (o bien crea una cuenta nueva). Haz clic en [ACCEPT AND DOWNLOAD] y sigue las instrucciones para guardar el instalador del controlador. Una vez descargado el instalador, haz doble clic en él y sigue las instrucciones para instalarlo en tu ordenador. A continuación, descarga e instala el Line 6 Updater para Spider V Visita Line6.com y haz clic en [Soporte]. Selecciona “Downloads” y, en las tres ventanas desplegables de “Free Software Downloads”, selecciona “Spider V 30”, “Line 6 Updater”, “el sistema operativo de tu Mac o PC”. Haz clic en [GO]. La página se actualizará con el actualizador Line 6 para el Spider V. Haz clic en [GET DOWNLOAD] para descargar el programa del actualización en tu ordenador. Haz clic en [ACCEPT AND DOWNLOAD] y sigue las instrucciones para guardar el instalador del actualizador. Una vez descargado el programa, haz doble clic en él y sigue las instrucciones para instalarlo en tu ordenador. Por último, actualiza el amplificador Spider V Conecta el puerto USB del Spider V a tu ordenador con un cable USB tradicional. Desliza el conmutador SELECT hasta el puerto USB marcado como Mac/PC. Activa el amplificador. Abre la aplicación Line 6 Updater e inicia sesión con tu cuenta de usuario de Line 6. Haz clic en el amplificador Spider V. Haz clic en el botón [Update] situado junto a la última versión del firmware en la parte superior. Sigue las instrucciones para empezar el proceso de actualización. No desactives ni desconectes tu Spider V ni el ordenador durante la actualización. Consulta el estado de la actualización en la pantalla LCD de Spider V. Una vez completada, el amplificador se reiniciará. Desconecta y vuelve a conectar el cable USB; a continuación, repite el proceso para el transmisor G10T. Nota: Si falla la actualización o si tu amplificador se bloquea durante el arranque, puedes mantener pulsados los botones AMP y FX para entrar en el modo Update. Una vez en el modo Update, intenta realizar nuevamente el procedimiento de actualización. II. Actualizar el firmware del G10T con el amplificador Spider V Comprueba que el amplificador Spider V sigue conectado al ordenador y que éste sigue conectado a Internet. Inserta totalmente el G10T en el jack de entrada del Spider. Comprueba que el conmutador SELECT sigue conectado al puerto USB marcado como “Mac/PC”. Activa el amplificador Spider si está desactivado. Ejecuta el programa Line 6 Updater. Inicia sesión en tu cuenta de usuario de Line 6. Haz clic en [Relay G10T]. Haz clic en el botón [Update] situado junto a la última versión del firmware. Sigue las instrucciones para empezar el proceso de actualización. Importante: No desactives ni desconectes tu amplificador Spider V ni el ordenador durante la actualización. El Updater notificará que el amplificador se está reiniciando, pero observa la pantalla del amplificador, ya que continuará actualizándose y, al final, mostrará “Part 1 of 1 100% Updating Transmttr”. El amplificador se reiniciará, finalizando el proceso de actualización. Mise à jour du système de l’émetteur G10 via les amplis Spider V Aperçu: Si vous disposez d’un ampli Spider V (MKI ou MKII) et souhaitez mettre l’émetteur G10T à jour, suivez impérativement l’ordre indiqué ci-dessous (mise à jour de l’ampli avant celle du G10). Nous recommandons vivement de mettre l’ampli à jour avec la dernière version de l’application Line 6 Updater à partir d’un ordinateur fixe ou portable même s’il est possible de le faire à partir d’un dispositif mobile. Tutoriel vidéo: Mise à jour d’un ampli Spider V compatible Relay et d’un émetteur G10T avec un ordinateur Mac Tutoriel vidéo: Mise à jour d’un ampli Spider V compatible Relay et d’un émetteur G10T avec un ordinateur Windows I. Mise à jour du système de l’ampli Spider V avec un ordinateur (Pour utilisateurs Windows) Commencez par télécharger et installer les pilotes Spider V. Rendez-vous sur Line6.com et cliquez sur [Assistance]. Sélectionnez «Downloads» et réglez les trois menus déroulants sous «Free Software Downloads» sur «Spider V 60», «Line 6 Drivers», «le système de votre ordinateur». Cliquez sur [GO]. La page affiche les pilotes Line 6 pour le Spider V. Cliquez sur [GET DOWNLOAD] pour télécharger l’installeur de pilote sur votre ordinateur. Connectez-vous à votre compte utilisateur Line 6 gratuit (ou créez un compte). Cliquez sur [ACCEPT AND DOWNLOAD] et suivez les instructions pour sauvegarder l’installeur de pilote. Quand l’installeur est téléchargé, double-cliquez dessus et suivez les instructions pour l’installer sur votre ordinateur. Ensuite, téléchargez et installez l’application Line 6 Updater pour Spider V. Rendez-vous sur Line6.com et cliquez sur [Assistance]. Sélectionnez «Downloads» et réglez les trois menus déroulants sous «Free Software Downloads» sur «Spider V 30», «Line 6 Updater», «votre système Mac ou PC». Cliquez sur [GO]. La page affiche l’application Line 6 Updater pour le Spider V. Cliquez sur [GET DOWNLOAD] pour télécharger l’application de mise à jour sur votre ordinateur. Cliquez sur [ACCEPT AND DOWNLOAD] et suivez les instructions pour sauvegarder l’installeur de l’Updater. Quand le programme a été téléchargé, double-cliquez dessus et suivez les instructions pour l’installer sur votre ordinateur. Pour finir, mettez l’ampli Spider V à jour Branchez la prise USB du Spider V à votre ordinateur avec un câble USB conventionnel. Faites glisser le commutateur SELECT sur le port USB Mac/PC. Mettez l’ampli sous tension. Ouvrez l’application Line 6 Updater et identifiez-vous avec votre compte utilisateur Line 6. Cliquez sur l’ampli Spider V. Cliquez sur le bouton [Update] à côté de la version la plus récente du système en tête de liste. Suivez les instructions pour lancer la mise à jour. N’éteignez pas et ne débranchez pas le Spider V ou l’ordinateur durant la mise à jour. Surveillez l’évolution de la mise à jour sur l’écran LCD du Spider V. A la fin, l’ampli redémarre. Débranchez et rebranchez le câble USB puis recommencez l’opération pour l’émetteur G10T. Remarque: Si la mise à jour échoue ou si votre ampli se bloque durant le redémarrage, maintenez les boutons AMP et FX enfoncés pour passer en mode Update. Une fois en mode Update, recommencez la procédure de mise à jour. II. Mise à jour du système du G10T avec l’ampli Spider V Vérifiez que l’ampli Spider V est toujours connecté à l’ordinateur et que l’ordinateur est toujours connecté à internet. Insérez le G10T à fond dans la prise Input du Spider. Vérifiez que le commutateur SELECT est toujours réglé sur le port USB Mac/PC. Allumez l’ampli Spider s’il est éteint. Lancez l’application Line 6 Updater. Identifiez-vous avec votre compte utilisateur Line 6. Cliquez sur [Relay G10T]. Cliquez sur le bouton [Update] à côté de la version la plus récente du système. Suivez les instructions pour lancer la mise à jour. Important: N’éteignez pas et ne débranchez pas le Spider V ou l’ordinateur durant la mise à jour. L’Updater signale que l’ampli se réinitialise mais surveillez l’écran de l’ampli qui finira par afficher «Part 1 of 1 100% Updating Transmttr». L’ampli se réinitialise alors, concluant ainsi la mise à jour. Firmware-Aktualisierung des G10-Senders mit einem Spider V-Verstärker Vorweg: Wer Zugriff auf einen Spider V (MKI oder MKII) Verstärker hat und seinen G10T-Sender aktualisieren möchte, muss in der nachfolgend beschriebenen Reihenfolge vorgehen (erst der Amp, dann der G10). Wir möchten Ihnen ans Herz legen, den Verstärker mit der aktuellen Line 6 Updater-Version von einem Computer/Laptop aus zu aktualisieren, wenngleich dies auch mit einem Mobilgerät möglich ist. Video-Tutorial: Aktualisieren eines Relay-fähigen Spider V-Verstärkers und des G10T-Senders mit einem Mac-Computer Video-Tutorial: Aktualisieren eines Relay-fähigen Spider V-Verstärkers und des G10T-Senders mit einem Windows-Computer I. Aktualisieren der Spider V-Verstärker-Firmware mit einem Computer (Für Windows-Anwender:) Laden Sie sich die Spider V-Treiber herunter und installieren Sie sie Surfen Sie zu Line6.com und klicken Sie auf [Support]. Wählen Sie “Downloads” und mit den drei Listenfenstern unter “Free Software Downloads” zunächst “Spider V 60”, dann “Line 6 Drivers” und Ihr Computer-Betriebssystem. Klicken Sie auf [GO]. Jetzt werden die Line 6-Treiber für die Spider V-Amps angezeigt. Klicken Sie auf [GET DOWNLOAD], um sich den Treiber herunterzuladen. Loggen Sie sich in Ihr Line 6-Benutzerkonto ein (oder legen Sie sich ein Konto an). Klicken Sie auf [ACCEPT AND DOWNLOAD] und befolgen Sie die Hinweise zum Sichern des Installationsprogramms. Doppelklicken Sie auf das heruntergeladene Installationsprogramm und befolgen Sie die Hinweise für die Installation auf dem Rechner. Laden Sie sich jetzt den “Line 6 Updater” für den Spider V herunter Surfen Sie zu Line6.com und klicken Sie auf [Support]. Wählen Sie “Downloads” und mit den drei Listenfenstern unter “Free Software Downloads” zunächst “Spider V 30”, dann “Line 6 Updater” und Ihr Computer-Betriebssystem. Klicken Sie auf [GO]. Jetzt werden die Line 6 Updater-Treiber für die Spider V-Amps angezeigt. Klicken Sie auf [GET DOWNLOAD], um sich das Updater-Programm herunterzuladen. Klicken Sie auf [ACCEPT AND DOWNLOAD] und befolgen Sie die Hinweise zum Sichern des Updaters. Doppelklicken Sie auf das heruntergeladene Programm und befolgen Sie die Hinweise für die Installation auf dem Rechner. Aktualisieren Sie Ihren Spider V-Verstärker Schließen Sie den USB-Port des Spider V mit einem geeigneten Kabel an den Computer an. Schieben Sie den SELECT-Schalter zum USB-Port mit der Beschriftung “Mac/PC”. Schalten Sie den Verstärker ein. Öffnen Sie den “Line 6 Updater” und loggen Sie sich in Ihr Line 6-Konto ein. Klicken Sie auf [Spider V]. Klicken Sie auf den [Update]-Button neben der aktuellen Firmware-Version (ganz oben). Befolgen Sie die Anweisungen, um die Aktualisierung zu starten. Schalten Sie den Spider V bzw. Computer bei laufender Aktualisierung nicht aus und lösen Sie nie die Verbindung. Das LC-Display des Spider V informiert über den Fortgang der Aktualisierung. Am Ende des Vorgangs wird der Amp neu gestartet. Lösen Sie die USB-Verbindung und Wiederholen Sie den Vorgang für den G10T-Sender. Anmerkung: Wenn die Aktualisierung fehlschlägt oder der Verstärker beim Hochfahren hängen bleibt, können Sie den AMP- und FX-Taster gedrückt halten, um in den Update-Modus zu wechseln. Wiederholen Sie die Aktualisierung im Update-Modus noch einmal. II. Aktualisieren der G10T-Firmware mit dem Spider V-Verstärker Der Spider V-Verstärker muss noch mit dem Computer verbunden sein – und der Rechner muss einen Internetzugang haben. Schieben Sie den G10T komplett in die INPUT-Buchse des Spider. Schieben Sie den SELECT-Schalter zum USB-Port namens “Mac/PC”. Schalten Sie den Spider-Verstärker bei Bedarf ein. Starten Sie “Line 6 Updater”. Loggen Sie sich in Ihr Line 6-Benutzerkonto ein. Klicken Sie auf [Relay G10T]. Klicken Sie auf den [Update]-Button neben der aktuellen Firmware-Version. Befolgen Sie die Anweisungen, um die Aktualisierung zu starten. Wichtig: Schalten Sie den Spider V bzw. Computer bei laufender Aktualisierung nicht aus und lösen Sie nie die Verbindung. Der “Updater” zeigt an, dass der Verstärker zurückgestellt wird. Im Display des Amps wird der Fortgang der Aktualisierung angezeigt und wenig später “Part 1 of 1 100% Updating Transmttr”. Der Verstärker wird schließlich zurückgestellt – die Aktualisierung ist beendet. Come Aggiornare il Firmware del Trasmettitore G10 tramite Amplificatori Spider V Panoramica: Coloro che hanno a disposizione un ampli Spider V (MKI o MKII) e vogliono aggiornare il Trasmettitore G10T, dovranno farlo seguendo l’ordine indicato qui di seguito (prima aggiornare l’ampli, poi il G10) Sebbene sia possibile farlo anche da dispositivo mobile, vi consigliamo vivamente di aggiornare l’ampli con l’ultima versione del Line 6 Updater da un computer desktop/laptop. Tutorial Video: Aggiornare un Ampli Spider V Relay-Ready e un Trasmettitore G10T Con un Computer Mac Tutorial Video: Aggiornare un Ampli Spider V Relay-Ready e un Trasmettitore G10T Con un Computer Windows I. Aggiornare il firmware di un Ampli Spider V Con un Computer Prima di tutto, (per utenti Windows) scaricate e installate i driver dello Spider V Andate su Line6.com e cliccate su [Support] Scegliete “Downloads” e selezionate nei tre menu a discesa di “Free Software Downloads” “Spider V 60”, “Line 6 Drivers” e “sistema operativo del vostro PC”. Cliccate [GO]. La pagina si aggiornerà con i driver Line 6 per lo Spider V. Cliccate [GET DOWNLOAD] per scaricare sul vostro computer l’installer del driver. Loggatevi con il vostro account gratuito Line 6 (o create un nuovo account). Cliccate [ACCEPT AND DOWNLOAD] (Accetta e Scarica) e seguite le istruzioni per salvare l’installer del driver. Quando l’installer è stato scaricato, per installarlo sul vostro computer fate doppio click su di esso e seguite le istruzioni. Poi, scaricate e installate Line 6 Updater per lo Spider V Andate su Line6.com e cliccate su [Support]. Scegliete “Downloads” e selezionate nei tre menu a discesa di “Free Software Downloads” “Spider V 30”, “Line 6 Updater” e “sistema operativo Mac o PC”. Cliccate [GO]. La pagina si aggiornerà con l’Updater Line 6 per lo Spider V. Cliccate [GET DOWNLOAD] per scaricare sul vostro computer il programma di aggiornamento (Updater). Cliccate [ACCEPT AND DOWNLOAD] (Accetta e Scarica) e seguite le istruzioni per salvare l’installer dell’Updater. Quando il programma è stato scaricato, per installarlo sul vostro computer fate doppio click su di esso e seguite le istruzioni. Infine, aggiornate l’ampli Spider V Collegate la porta USB dello Spider V al computer con un normale cavo USB. Spostate il selettore SELECT sulla porta USB contrassegnata con Mac/PC. Accendete l’ampli. Aprite l’applicazione Line 6 Updater e registratevi con il vostro Account Line 6. Cliccate sull’ampli Spider V. Cliccate il pulsante [Update] in alto vicino all’ultima versione del firmware. Per iniziare l’aggiornamento seguite le istruzioni. Durante l’aggiornamento non spegnete né scollegate lo Spider V o il computer. Verificate sull’LCD dello Spider V che l’aggiornamento sia completato. Al termine, l’ampli si riavvierà. Scollegate e ricollegare il cavo USB, poi ripetete il procedimento per il Trasmettitore G10T. Nota: Se l’aggiornamento non va a buon fine o l’ampli si blocca all’accensione, tenete premuti i pulsanti AMP e FX per entrare in modalità Update. Una volta in modalità Update, eseguite di nuovo la procedura di aggiornamento. II. Aggiornare il firmware del G10T con l’Ampli Spider V Assicuratevi che l’ampli Spider V sia ancora collegato al computer e che il computer sia collegato ad internet. Inserite completamente il G10T nel jack di ingresso dello Spider. Assicuratevi che il selettore SELECT sia ancora posizionato sulla porta USB contrassegnata “Mac/PC”. Accendete il vostro Ampli Spider, se è spento. Lanciate il programma Line 6 Updater. Eseguite il login al vostro Account Line 6. Cliccate su [Relay G10T]. Cliccate il pulsante [Update] vicino all’ultima versione del firmware. Per iniziare l’aggiornamento seguite le istruzioni. Importante: Durante l’aggiornamento non spegnete né scollegate lo Spider V o il computer. L’Updater indicherà che l’ampli si sta resettando, ma voi guardate lo schermo dell’ampli, che continuerà l’aggiornamento, finché al termine scriverà “Part 1 of 1 100% Updating Transmttr”. L’ampli si resetterà, terminando il procedimento di aggiornamento. -
Hi, I have an issue with my LT. I'm using is as interface on Windows 10. The problem I have is that sound is freezing for 1-2 seconds from time to time. It affects only the sound coming from PC (both audio playback or recording in Cubase). E.g. when I jam to backing track, music stops for 2 sec, but I can hear my guitar without interruption. It happened on 2.82, I have 2.91 and still it is an issue. Any ideas how to deal with it?
-
Hi, I am using the UX1 to plug my guitar in to my Mac (I'm on Catalina) to record using logic pro x. It lets me play/record for about 30 seconds and then basically just feeds back one never ending sounding horrible note (no its not my playing, classic lols). I have recently updated my line 6 software & mac, changed cables. All the usual things I can think of but nothing works. Has anyone had this problem or know how to fix it. Many thanks! Rich
-
Hello, This unit has always worked without any issue, but all of a sudden I connected it as usual and it didn't turn on. At the beginning I thought it was completely broken but because I was still hearing that click after turn it on, I tried connecting the USB to the computer and realized that it was working there as usual, and the effects too when connected to the amp. I've tried resetting and reinstalling the firmware but it's still the same. Have anyone experienced the same issue or something similar?
-
My Line 6 HD500X is not starting after I switch on the power. Line 6 Logo appears, stays for some seconds, the logo change to a big blue block and then fades away. Line 6 Logo appears again. This keeps happening in a loop. This happened while I was downloading tones from my laptop. How can I reset the HD500x?
-
I am a relatively new user to the Helix and I'm having an issue with latency when I'm switching between snapshots in a given bank. When I purchased the unit it had firmware 2.3 installed and I updated to the latest firmware version and everything went smoothly. I cannot say for sure but I felt like I wasn't getting a latency issue when switching between snapshots before the update and if I understand correctly I shouldn't be having that issue. Like I said, I'm not sure if the latency was existing before the update but it is definitely present now and it will make my music unplayable due to dynamics and what not. If anyone can give me some insight here that would be super appreciated, thank you.
-
Hi everyone, First time poster. I have read through the topics here on the forum but it seems like the topic has not been covered. Been using the helix floor for a year now. Great piece of gear! It is in my understanding that using snapshot is the way to go to change parameters with a patch without the ''sound gap'' you would get by switching presets. So I've been using snapshots for in-song changes, and presets for song-to-song (which seems to be common). Until now everything worked fine. I updated to 2.82 lately. I have a couple of presets based on the same ''rig''; the only thing that tends to stay the same would be the amp settings. Effects and snapshot changes. Last week I started to experience a ''sound gap'' (like the one you get when you change presets). Strangely, it seems to be related to when 2 presets are the same, within the setlist. I tried to build the preset from scratch instead of copying it, but as soon as I match the amp settings, I get that problem when I go through the snapshots. I don't know if someone encountered a similar problem, or even if I did explained it well, but if anymore encountered a similar issue, or have a fix... Thanks in advance for your help. English is not my primary language but I'll try to give more details if some of you have question Thank you, Cédric
-
Hello All - Writing to get some expertise on an issue I'm having with the 6 button looper on the Helix (LT if it matters)... The issue is simple, and I hope there's a simple answer but I can't for the life of me figure out what happened. When engaging the six button looper that has been assigned to one of the stomp switches the looper interface used to come onto the screen and show me which foot switches were assigned to effects/rec/stop ect. But this is no longer the case... NOW when I hit the looper the foot switches will light up - like they should, showing the looper is armed, and it does work - but the screen remains on the signal chain view, and I get confused... What did I do? How do I get the looper interface to come back onto the screen!?
-
Hi, I just bought an HX Stomp. Downloaded my first IR and was trying them out. Just for fun, I cleared them to try new ones and now I'm having problem transferring IR to my unit, even the same IR i was already using. My HX Stomp stays "blocked" saying Transferring Data... and my soft is also blocked. I tried changing USB Ports, not using a hub, any possible combination and it's driving me crazy. I even reset everything and still doesn't work. Could it be a faulty unit? Thanks in advance for your help
-
Hello evereyone, I was just confrontaded with a really weird issue with the DT25 Unit. Everytime i left my amp on the rehearsal room for as long as a week disconected from the power due to fire prevention, i found the amp with a really bad issue whem i try to start it again: all the lights from the switches turns on buts no sound comes out of the amp, just a quite noise. On the first time i reeinstalled without trouble the flash-unit and it helped. The second time the amp wasn´t recognized trought the Midi interface. Curiosly it started on his own after beeing setted on standby about an hour along without doing nothing with it. I noticed this because it did a typical clipping sound and after that just a few lights were on and it was ready to be played. It is well known not to let the power on inside rehearsal rooms when you left it. So my question is why is this happening in the first place. Is there a hidden battery which needs to be loaded on regular periods of times, and it is possible to replace this battery? Thanks up front for any hints and answers!
-
Hello everyone! I'm having issues getting Helix Native to pan in order to run a different signal path to the right and left. I would like to take one mono clip and, in one instance of Helix Native, split it left and right. When I pan Helix Native's "Host Output" hard right, it will always be silent on playback, when I pan it hard left, it gets slightly quieter but will still play at an equal volume on both speakers. I can have the track panned hard left, hard right or center in Logic Pro's track editor, and these results are always the same when I make the changes within Helix Native's "Host Output": Silent when hard panned right, loudest at center, slightly quieter at hard left. Here are some pictures of my signal chain and host output that I'm referring to, could I be overlooking anything?
