Search the Community
Showing results for tags 'logicprox'.
Found 4 results
Hi! I have too many options on how to record the guitar tone to Logic Pro X and dont know what is best practice? I've got an UA Twin Apollo card, a Helix floor and also Helix Native in Logic Pro X 10.5. 1. I started out recording my Helix floor, going out from the XLR outputs on the Helix output straight in to my Universal Audio inputs. Hence, I had to set the sound right and could not tweak the sound with Helix components afterwards. Still good sound though. 2. I bought Helix Native and tried to record a dry signal straight in to the Universal Audio instrumental input and then tweaked the sound in Logic using Helix Native. The issue I got is that you normally end up with quite a number of guitar tracks (intro, solo, chorus.....) and that caused latency. I could live with that, adjust buffer size when recording and mixing and still be ok. 3. I accidentally hooked up the Helix floor with USB to the iMac and recorded straight through the Helix floor, without using the UA apollo twin. Also sounded great. 4. Having experienced the above, I thought I would do a combination, meaning I record both from a normal preset on the Helix (with a ready made sound) and a dry signal at the same time ( to be able to tweak it later with Helix Native, would the need occurr.). 5. Yes, I've got a Powercab and 57's mics etc but I would prefer not recording that way but would prefer recording straight in to the computer without the need to amplify the sound through the powercab and record through a microphone. I'm a total beginner in this, what do you guys have as your way to go when recording if you have both a Helix and Helix Native? Is there such a thing as a standard practice? kind regards, Joakim
help!!!! i got my HX stomp set up happy abt the sound and staff updated Mac OS Mojave then my HX stomp is not working while its the USB interface of Logic Pro X Video: https://youtu.be/1dHJcwaXCOE as shown in the video it keeps switching to tuner i can still hear sounds from logic coming out from HX stomp but i cant hear anything/ record anything via HX stomp as the interface... what should I do ........ HELP~~~~
HELLO LINE 6 BUDDIES! I'm two-track recording an acoustic guitar with my POD HD500X as the audio interface. I have a RODE NT1A condenser mic plugged into a mixer with phantom power. This mixer is then connected to the POD's 'Guitar In' input via guitar lead, and there is also an acoustic guitar connected to the 'AUX' input for a direct signal. This is all running through Logic Pro X on my Macbook Pro (Early 2015) with 16GB RAM. I have used this setup before and it has all worked fine, except today I am hearing intermittent static coming from both inputs at seemingly random intervals. It sounds like a short burst of a bitcrusher-like sound, and then goes back to normal after less than a second. It can't be any problem with the mic/mixer because I am getting the problem on AUX (direct input) as well as the Guitar In (mic) input. I have tried different USB cables, and have tried different power outlets. I have also tried a different audio interface (that can unfortunately only handle one input) that didn't seem to have the same problem, leading me to think that it also isn't an issue with Logic Pro X... SO... Has this happened to anyone before, and can anyone think of any reason this might be happening? Yeah, I've turned it off and on again ;)