Search the Community

I am trying to do automatic pod hd pro x patch changing in Repaer with MIDI, but I can't see the Pod in the MIDI output devices, only as an input device.. Any ideas why? Screenshot:

Hi all My rig guitar rig includes a whammy, boss distortion and boss phase pedal running into a POD XT, running stereo into an M9 and out to the FoH. I use an FBV express to control my Wah/Volume and swap between amps etc. I've been experimenting with using the phase shifter and distortions on the POD preamp and want to use those instead of the pedals. Since I'm not using Exp inputs on the M9 would it be possible to attach two standard latching footswitches and send them through the M9 via MIDI to turn on and off the stomp and modulation FX on the POD. I can see how to get the POD to respond and which CC commands to use, but can't work out how to send the MIDI from the M9 and how to set the CC commands of the Exp inputs. Is this plan even possible? Ta

OK MIDI Gurus- riddle me this: I have been using MIDI since the early 90's and consider myself somewhat knowledgable in this area... this means the answer is simple because I sure as heck have overlooked something easy. :) FACTS: My band plays to a sequence during its entire performance. The sequence comes from a Yamaha Motif ES6, onboard 16-track sequencer- and it acts as the MASTER controller. The sequencer has several tracks dedicated to various MIDI 'instruments' and devices. These devices are, in order of channel assignment and physical hook-up with MIDI cables: 1. HD500 (MIDI ch 1)... changes patches, turns FX modules on/off 2. American DJ lighting mixer (MIDI ch 2) for spotlight (yes, I'm programming my lights... worked fine for the last 8 years and highly recommended) 3. Another American DJ lighting mixer (MIDI ch 3) for the LED pars around the stage. The LED lights ARE terminated. 4. TC Helicon Voiceworks Plus rack vocal processor (MIDI ch 4)... changes patches and FX 5. Roland TD-10 drum brain (MIDI ch 10).... changes patches. This set-up was working perfectly with a Podxt Live until I got the Pod HD500 and put it into the dasiy chain (yes, I selected the correct MIDI channel). Once I replaced the old pod with the newer HD500 my lighting sequence became altogether sporadic, working only at only 40% accuracy. When I put the HD500 at the end of the chain everything works fine. Go figure. So the question is: why do I have to put the Pod HD500 at the end of the chain in order for everything to work normally? Thanks for your input in advance. Chad