Search the Community
Showing results for tags 'output settings'.
I am wondering about how to feed my Yamaha DBR12 active FRFR-Monitor the best way? Coming from the POD HD500X, at rehearsal I had an external volume-controller connected from my 1/4 output to the DBR12, so I could dial in my personal volume by foot. Now it seems to me, that with the Helix floorboard I could get rid of the external volume-controller, using the Phones-level dial and connect the Phones-out to the DBR12. But is this realy the way to go or should I use an 1/4 output anyways and assign the Phones-level dial somehow, so that it only controlls the 1/4 out? This seems possible but at home I like to use the Phones-level dial for my Headphones without switching the settings.
I use the Podhd500x for vocals and guitar live, i have the spider hd150 and im wondering the best output option, atm im going xlr L to mixer for vocals and xlr R to the amp using a XLR to jack, but is it best for me to go 1/4 inch jack to desk and 1/4 jack to amp? XLR is best for Vocals but im wondering if its best for guitar or not? On top of that what would be the best output setting? Direct out is good for vocals yet to a stack for guitar.
I have a strange problem. I made a preset as seen on the picture: The signal paths are as follows: Path 1A is a seperate path to be usaed for a microphone so I can put some effects on my voice. Path 1B is for guitar and continues to path 2A. Pathe 2A splits after the amp to path 2B with a Y-split. Path 2B Contains some post amp effects. I do this to have a signal without the delays going to the output as wel as a singnal with delays. This makes my guitar playing more articulate, not completely being delayed. Both 2A and 2B ar set to Digital output because I send to my DT25 through Line6 Link. The problem (bug?): If I change the output to something else I can't return to Digital. Somehow the digital output is not available, eventhough it's selected allready. Why is this? Am I doing something wrong? Is it a bug?
I tried turning the lows from -50 to flat while connected to my Dt25 but I can't say I heard much happening. The same happened with the highs. I could hear some difference when changing the focus but it was very little, much less than I would expect. Has anybody ever fiddled with these setting? What are your experiences.?