Jump to content

Search the Community

Showing results for tags 'reset'.



More search options

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • Community Support
    • Multi-Effects Units
    • Variax Instruments
    • Amplifiers
    • Computer Based Recording
    • Live Sound
    • Pedals/Controllers
    • Dream Rig - Line 6 Product Integration
  • General Discussion
    • Share your Settings
    • Line 6 Lounge

Categories

  • General FAQ
  • Tutorial Videos
  • Effects/Controllers
    • HELIX
    • Firehawk
    • FBV Controllers (MKI / MKII/ 3)
    • M5 / M9 / M13
    • JM4 Looper
    • Stompbox Modelers / ToneCore
    • ToneCore Development Kit
  • Recording
    • Helix Native
    • Echo Farm
    • POD Farm / POD Studio / TonePort
    • Computer Audio Set Up and Troubleshooting
    • Riffworks Line 6 / Standard Edition
  • POD
    • POD HD Family
    • POD HD500/HD500X
    • POD HD300/400
    • POD X3 Family
    • POD 2.0 / PODxt Family / Pocket POD / FloorPODs
  • AMPLIFi Series Products
    • AMPLIFi 30/75/150/TT
    • AMPLIFi FX100
    • Videos
    • Tone Creation
  • Amplifiers
    • Spider V
    • Powercab
    • Firehawk 1500
    • DT50/DT25
    • Spider IV/Spider Online
    • Spider Valve
    • Spider Jam
    • Vetta
  • Live Sound
    • Relay/XD-V Digital Wireless
    • StageScape M20d Mixer
    • StageSource Speaker
  • Guitars
    • JTV / Shuriken / Variax Standard / Workbench HD
    • 1st Gen Variax Guitars / Bass / Workbench
  • Mobile Products
    • Sonic Port devices / Mobile In
    • Mobile Keys
    • MIDI Mobilizer
    • Mobile POD app
  • Dream Rig
  • Legacy Products
    • Amps
    • POD
    • Effects and Controllers
    • GearBox
    • Line 6 X2 Digital Wireless

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


AIM


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests


Registered Products

Found 40 results

  1. Note: This will erase all current presets and restore the factory sounds, so please save your sounds on a second source if necessary. AMPLIFi 30/75/150/TT: Press and hold the Master Volume knob and Tone button as you power up the amp. AMPLIFi FX100: Press and hold the Master Volume knob and the TAP button as you power up the unit. Axsys 212 or AX2: Press and hold the "User/Preset" and "Save/Store Sounds" buttons, and keep holding as you turn the unit on. DL4: You can reset your pedal to the factory settings by powering it up with the A and D footswitches held down - the power is turned on and off on the modeler pedals by inserting a plug into the left mono input jack. Duoverb: Hold A & D while powering unit. DT25/DT50: Requires a MIDI-to-USB interface with driver support from manufacturer (M-Audio MIDIsport series, Yamaha UX16, etc.) and use Line 6 Monkey via USB connection to MIDI In and MIDI Out of DT50 for a firmware re-install. DT25/DT50 Firmware Update Instructions Firehawk FX: Press and hold the Master Volume knob and the TAP button as you power up the unit. Unfortunately, any patches not backed up to My Tones prior to the reset will be lost. Firehawk 1500: Press and hold the Master Volume knob and the Navigation Encoder (the scroll wheel) as you power up the unit. Flextone I &II: hold down A, B, C, and D while powering the unit on. Flextone III: hold the A and D Buttons while powering up for 8 seconds. Bass POD: press and hold the up and down arrow buttons as you power the unit on for ~ 5-7 seconds or until it goes to the preset 1-A Bass POD Pro: Hold the UP and DOWN arrow key down as you power on for ~ 7 seconds. Bass POD XT Pro and Bean: press SAVE once, use the select key to scroll clockwise to the factory recall page, then press SAVE twice. Bass POD XT Live: see POD XT Bean/Live/Pro Bass Floor POD: Hold COMP and FX while powering up. When 01 appears, disconnect power. Power up. Floor POD: Hold MOD and DELAY while powering up. When 01 appears, disconnect power. Power up. Floor POD Plus: Hold BANK UP and BANK DOWN while powering up unit (display will read INT) Four Button Modeling Pedal: (DL-4, MM-4, FM-4, DM-4): Hold A and D footswitches and power up - the power is turned on and off on the modeler pedals by inserting a plug into the left mono input jack. Helix Floor/LT: Turn unit off and then back on. Hold in Footswitches 9 and 10 right after you turn the unit on, throughout the boot process, until you see that your factory presets are loading. Helix Rack: Turn unit off and then back on. Hold in Encoders 5 and 6 right after you turn the unit on, throughout the boot process, until you see that your factory presets are loading. HX Effects: Turn unit off and then turn back on. Hold Footswitch 6 and Tap throughout the boot process, until you see that your factory presets are loading. If you run into any trouble with a failed update or your unit will not boot up, try powering on while holding the right arrow ">" This will put the unit into update mode and you can re-install the latest firmware from there. HX Stomp: Turn unit off and then turn back on. Hold Footswitches 2 and 3 as the unit boots up. HD147: hold the A and D Buttons while powering up your amp. JM4: Hold down the settings/tone button as you power the unit on and hold the button for 5-8 seconds. M5: Press and hold the TAP button and tap the Model Select knob to enter the setup menu. Tap the model select knob until you see the MIDI, Tempo and Gate functions. Turn the model select knob until the corresponding display shows RST FACT. Hold the On/Off switch and tap the model select knob twice to reset the M5. M9: Press FX Unit 1B and 2B switches at the same time to enter the setup menu. Press the Model Select knob until the display reads MIDI Gate Display across the top. Turn the Model Select knob until the corresponding display shows RST FACT. Press and hold the TAP button just before (split second) pressing the Model Select knob. Its like pressing them down at the same time, but making sure the TAP button is pressed first. Do that once again to reset the M9. M13: Press and hold Looper Controls to enter the setup menu. In FX UNIT 4, turn the Model Select knob until the corresponding display shows RST FACT. Press down on the Model Select knob twice to complete the reset. Lowdown: power on while holding down the 'A' button for 5-8 seconds. POD/POD 2.0/Bass POD/POD Pro: press and hold the up and down arrow buttons as you power the unit on for ~ 5-7 seconds or until it goes to the preset 1-A Pocket POD: Hold the save button and 4-way arrow key up while plugging a cable into the instrument input to power the unit on. The unit will prompt for a factory reset, press save to initiate the factory reset. You can also re-install the flash memory on the Pocket POD by connecting to your computer via USB and using the latest version of Line 6 Monkey. In the UPDATES tab of Monkey, click on Flash Memory, then click 'Re-Install Latest' or 'Update Selection'. POD X3 - Bean/Live: Press and hold the "Home/Hold For Commands" button, select "Reset User Presets" and press the "Save" knob to reset the User bank to its factory presets. POD XT: Bean/Live/Pro: You must re-install the flash memory on the PODxt device to reset the unit back to factory settings. Check out this link for instructions. PODxt reflash instructions. POD HD300/400: POD HD300/400 Factory Reset Video Tutorial POD HD500/500x/HD/HD Pro: You must re-install the flash memory on the HD device to reset the unit back to factory settings. Check out this link for instructions POD HD500 Factory Reset Video Tutorial Powercab 112 Plus: Re-flashing the firmware will effectively perform a factory reset. Rackmounted Pro Effect units MOD Pro/Filter Pro/Echo Pro: press MIDI/Sys, use program select knob to FR (save button will begin flashing). Turn speed knob all the way up to "all", press save twice. Relay G70/75 From the edit menu, select "Factory Reset" and press the Nav/Select Encoder. Turn the Encoder to select OK, or cancel to exit. Press the encoder button to commit your selection. Spider I, II, III, IV, Micro, and Valve Series: Hold down the A (or clean) button as you turn on the power and hold the button for 5-8 seconds. Spider V Hold down the Home button to access the settings menu. Scroll down with the encoder to where it say Factory Reset. Scroll to the right and press to encoder knob to hit Yes. Spider V 20: Hold down all three FX buttons, then press and release 'save' while the amp is turned on. Spider Jam: Hold down the settings/tone button as you turn on the power and hold the button for 5-8 seconds. Stagescape M20d: You must tap the "i" button in the upper right corner of the Main Toolbar. Then tap Show System Settings > backup > Restore Factory Settings. **Warning!** This procedure will erases ALL stored presets on the unit and reverts to the factory presets provided by Line 6 in the latest installed firmware. Variax Electric and Acoustic Guitars and Basses You will have to connect your VARIAX to the WORKBENCH, POD XT/X3 LIVE, or VETTA II to reset your factory default settings. Then you will have to connect your interface to your computer. Here are the instructions for each: Variax Electric 300, 500, 600, 700 and James Tyler Variax Guitars These instruments can only be returned to factory reset by reinstalling the flash memory. Connect the Variax digital guitar cable to your Variax interface (you will need to have the unit powered the with TRS cable unless you are using a POD XT/X3 Live or Vetta) to the Line 6 Monkey, select your variax instrument, choose firmware (in the updates tab), and select "reinstall latest". Variax Reflash and Software update F.A.Q. Variax Acoustic (Steel String and Nylon) 300 These instruments do not have a reset function. The presets are simply a variety of settings that the user can overwrite. In other words, the user cannot lose anything, except for the original settings that are provided as examples/starting points. Variax Acoustic 700 - Soft Reset Start with unit off (TRS cable and/or Variax Digital cable unplugged from guitar). Rotate the model selector to the SITAR position. Press and hold model selector (as in Save routine) while inserting TRS cable or Variax Digital cable to power up the unit and perform reset. For a full reset, please follow the Variax Electric Guitar procedure as described above. Variax Bass 700 705 Factory defaults must be restored one at a time. Select the Model you wish to normalize. Place the blend and two tone controls in the detent position. Now press the Model select pot down until the indicator light stops flashing. The Model should now be restored to factory settings. Use this procedure for any model you want to restore to the factory setting. Vetta I & II Soft Reset: Press the save button, and spin the Page knob until you get "Reset USER memory?". Press the Save button again and you will see the Vetta count through the channels one by one. Hard reset: Vetta Reflash procedures Rackmounted Pro Effect units
  2. We’re sure you’ll have a great experience with your Helix. As with anything, be sure to regularly back up your presets, and in the event anything unexpected happens while using your Helix, please perform one or more of the steps below. If your Helix ends up in a bad state due to a failed firmware update, first perform a factory reset by holding footswitches 9+10 (Helix/LT) or encoders 5+6 (Rack) during boot up. Then reboot and enter update mode by holding down footswitches 6+12 (Helix/LT) or encoders 1+6 (Rack) Make sure to try this out on multiple computers in case of poor USB connections. Helix Floorboard/LT 1. Holding footswitch 5+6 on boot restores Global parameters 2. Holding footswitch 7+8 on boot restores presets and setlists—THIS WILL OVERWRITE ALL USER PRESETS AND SETLISTS 3. Holding footswitch 8+9 on boot restores presets, setlists, and IRs—THIS WILL OVERWRITE ALL USER PRESETS AND SETLISTS 4. Holding footswitch 9+10 on boot restores presets, setlists, globals and IRs (restores factory bundle)—THIS WILL OVERWRITE ALL USER PRESETS AND SETLISTS 5. Holding footswitch 10+11 on boot will rebuild your presets in the latest loaded firmware 6. Helix can now restore by clearing only the current preset instead of wiping out all presets. While holding footswitches 11 + 12 7. Helix can now, after firmware 1.06.5, enter update mode manually by holding footswitches 6 + 12 Helix Rack Since the rack doesn't have footswitches, you'll instead hold down a combination of the 6 encoders that are below the main LCD screen as you're booting up. ENC2 & ENC3 - reset globals ENC3 & ENC4 - restore stock presets and setlists ENC4 & ENC5 - restore stock presets, setlists, and IRs ENC5 & ENC6 - reset globals and restore presets, setlists, and IRs (entire factory restore) ENC1 & ENC3 - rebuild all presets ENC1 & ENC5 - clear all presets, setlists, and IRs ENC1 & ENC6 - will enter Update Mode (This feature is only available on firmware v1.06.5 and higher) HX Effects 1. Holding FS3 + MODE - Will clear all Presets and IRs 2. Holding FS4+FS5 - Will reset Global Settings 3. Holding FS5+FS6 - Will reset Presets only 4. Holding FS6+TAP - Will Perform factory restore (reset, Globals, IRs, and Presets) 5. Holding the right arrow ">" Will put the unit in a fail safe update mode. Use this when the HX Effects is in a un recoverable state HX Stomp 1. All 3 Footswitches clears all presets/IRs 2. FS1+2 resets presets and IRs 3. FS 2+3 does a factory restore (globals, presets, IRs) Make sure to always update to the latest firmware using Line 6 Updater. http://line6.com/software/
  3. Hey Guys! I've got a M5 pedal, that was dying slowly, as I thought. It was stuck in one preset, was rebooting constantly and no sound produced. I've tried to update the firmware, but it failed. Then I've managed to reset it to factory settings and it worked (actually I did it twice). Pedal does produce sound now, but it behaves not quite like it was before. It doesn't activate a preset until I tap both buttons. So I can scroll through the list of presets, but it would sound like the last preset I've edited. Then I tap both buttons and the selected preset activates. Before the reset it activated selected preset instantly. I've bought my pedal from a person, so I don't know how it should work with factory defaults. Maybe I could set it up to activate presets while scrolling through them? P.S. Also the expression pedal doesn't work with it anymore. Little dots appear, but no changes are made by the exp-pedal. But I'm not sure if it's working by itself.
  4. dmeyers17406

    Saving Amp Packs before a reset?

    First time posting. Read a lot on here the last week while I was waiting for my 500X to arrive. Just got it today, and man, I wish I had bought one years ago. My friend got one not long after they came out and tried to convert me, but at the time I was a tube amp/stompbox purist. Ive since decided its stupid to not embrace new stuff, so I got one. Heres the situation I find myself in now. I bought my 500X used. It came with the full, $100 HD amp bundle on the unit. I would like to "reset" the unit so I can start new with a fresh slate to work with. However I dont want to lose those extra amps. Can you save/back up just the amps on the unit and put them back on after its been reset? Or would it be best to just go through and delete all the non factory patches/setlists instead of resetting? And since Im still trying to figure out the ins and outs of this thing, how do you create a backup of just the amps? Is there maybe a list of various tutorials somewhere for all these noob questions? Any help is appreciated. Thankis
  5. Deutsche Version Version française Please go through the following checklist before updating the flash memory of your Variax guitar to ensure the update completes successfully: Ensure that the interface you are using to update the Variax with (Workbench Interface, PODxt Live/Pro, POD X3 Live/Pro, POD HD500/HD Pro, Vetta II) isNOT connected to the computer through a USB hub. Make sure to connect the interface into a USB port directly into the computer, especially into the back of a desktop. If problems persist, make sure to test all of the USB ports on the computer. Avoid plugging into USB ports found on keyboards, monitors, or laptop docks. [*]When using the Workbench Interface to update or edit the Variax guitar, ensure that a charged battery is in the guitar and a 1/4" TS mono cable is inserted into the guitar's output jack, or that the stereo TRS cable is plugged into the Variax providing power from the XPS power supply to power on the guitar. [*]On a James Tyler Variax guitar, ensure that the Volume knob on the guitar is NOT set to the '0' position as it will put the guitar into Power Save Mode. Make sure that the Volume knob is set higher than 0 when updating or editing the JTV guitar. [*]Please use the VDI Cable that comes with the JTV guitar when updating the flash memory on that guitar. Avoid using VDI or CAT5 cables longer than 10 ft. in length when updating any Variax guitar. [*]During the update, select 'NO' when asked if you would like to keep the presets on the guitar. Use the Workbench software to back up your guitar presets before updating if you would like to keep them. [*]Close out any other applications running on your computer before updating the Variax guitar. Q: How do I update or re-install the flash memory on my Variax Electric 300, 500, 600, 700, James Tyler Variax, and Shuriken guitars? A: These instruments can only be returned to factory reset by reinstalling the flash memory. You will need to connect your Variax to the workbench software using your Variax enabled hardware (i.e. Variax Hardware interface, POD XT/X3 Live, POD X3 Pro, VETTA with VDI, or POD HD500), then you will have to connect your interface to your computer via USB. Once the guitar and interface are connected to the computer, you will need to run Line 6 Monkey. See the following link for more information on connecting your device to your computer and installing Line 6 Monkey: Line 6 Monkey Installation and F.A.Q. USB Connectivity with Line 6 Devices Once you have Monkey installed and your computer is recognizing the connection, see the screen shots for the reflash procedure: 1) Once you run Line 6 Monkey, Monkey may ask you to register. If you do not wish to register (or have already registered) select "remind me later". 2) If you want to reinstall the factory presets (or update the firmware), select "Flash Memory" the select "Reinstall Latest" 3) Select "OK" to agree to the software license 4) Select "yes" or "no" If you want to keep the patches on the instrument 5) Select "Yes" to continue with the update. Do not disconnect the variax during the update. 6) Line 6 Monkey will reinitialize the device and update the flash memory. You can watch the progress on the blue bar on the right side of Monkey. 7) Once the update is complete you will need to select "OK" to continue. Variax Bass 700/705 Reflash Factory defaults must be restored one at a time. Select the Model you wish to normalize, the place the blend and two tone controls in the detent (center) position. Now press the Model select pot down until the indicator light stops flashing. The Model should now be restored to factory settings. Use this procedure for any model you want to restore to the factory setting. The Variax bass series can also be "reflashed" using the procedure for the Variax electric guitars described above. Anweisungen zu Reflash und Software Update der Variax Bitte folgen Sie dieser Checkliste bevor Sie die Flash Memory Firmware Ihrer Variax Gitarre aktualisieren um sicher zu stellen, dass ein Update erfolgreich installiert werden kann: Stellen Sie sicher, dass die Schnittstelle, welche Sie zum aktualisieren Ihrer JTV benutzen (Workbench Interface, PODxt Live/Pro, POD X3 Live/Pro, POD HD500/HD Pro, Vetta II) nicht per USB Hub an Ihren Computer angeschlossen ist. Stecken Sie die Schnittstelle hinten direkt in einen der USB Ports Ihres Computers. Wenn weiterhin Probleme bestehen sollten Sie alle USB Ports ausprobieren. Achtung, vermeiden Sie es, die Schnittstelle in einen USB Port einer Tastatur, eines Monitors oder eines Laptop-Docks zu stecken. [*]Wenn Sie das Workbench Interface benutzen, um Ihre JTV zu bearbeiten oder aktualisieren, stellen Sie sicher, dass die Batterie vollgeladen und ein 6.35mm TS Mono Kabel im Gitarren Ausgangs-Jack eingesteckt ist, um die Gitarre anzuschalten. [*]Der "Volume" Knopf darf nicht auf der "0" Position sein, da die Gitarre ansonsten in den Energiesparmodus geht. Der "Volume" Knopf muss also auf einer anderen Position sein als "0" um die Aktualisierung durchzuführen. [*]Bitte benutzen Sie das VDI Kabel, welches bei der Gitarre mitgeliefert wurde wenn Sie Flash Memory aktualisieren möchten. Benutzen Sie möglichste keine CAT 5 oder VDI Kabel, die länger als 3 Meter sind wenn Sie die James Tyler Variax aktualisieren. [*]Während der Aktualisierung klicken Sie "NO" wenn Sie gefragt werden ob Sie die Presets behalten möchten. Sie sollten die Presets, die Sie behalten wollen vor dem Update per Workbench Software sichern. [*]Schließen Sie alle unnötigen Programme bevor Sie die JTV Gitarre aktualisieren. Wie kann ich Flash Memory auf meiner Variax Electric 300, 500, 600, 700 oder James Tyler Variax Gitarre aktualisieren oder neuinstallieren? Diese Instrumente können ausschließlich per Neuinstallation von Flash Memory auf Ihre Werkseinstellungen zurückgesetzt werden. Dazu müssen Sie zuerst Ihre Variax via USB-Schnittstelle (Variax Hardware Interface, POD XT/X3 Live, POD X3 Pro, Vetta mit VDI oder POD HD500) mit Ihrem Computer verbinden. Wenn Gitarre und Schnittstelle dann an den Computer angeschlossen sind, starten Sie Line 6 Monkey. Klicken Sie für weitere Informationen über die Verbindung Ihrer Schnittstelle an den Computer auf die folgenden Links: Line 6 Monkey Installation and F.A.Q. USB Connectivity with Line 6 Devices Wenn Monkey installiert ist und Ihr Computer die Verbindung erkannt hat, folgen Sie den nachstehenden Anweisungen zum Reflash: 1. Wenn Monkey startet, Monkey fragt Sie vielleicht sich zu registrieren. Wenn Sie sich nicht registrieren wollen oder bereits registriert sind, klicken Sie "Remind me Later". 2. Wenn Sie die Werks-Presets neuinstallieren (bzw. die Firmware aktualisieren) wollen, wählen Sie "Flash Memory" aus und drücken Sie auf "Reinstall Latest". 3. Klicken Sie "OK" um der Software Lizenz zuzustimmen. 4. Klicken Sie "Ja" oder "Nein" jenachdem ob Sie die Patches auf Ihrem Instrument behalten wollen. 5. Klicken Sie "Ja" um das Update zu starten. Trennen Sie die Variax auf keinen Fall während der Aktualisierung vom Computer. 6. Line 6 Monkey wird nun das Gerät zurücksetzen und Flash Memory aktualisieren. Rechts können Sie an dem blauen Balken sehen, wie weit das Update ist. 7. Nach dem Update müssen Sie auf "OK" drücken. Variax Bass 700/705 Reflash: Bei diesen Gitarren müssen die Werkseinstellungen einzeln zurückgesetzt werden. Wählen Sie das Modell aus, welches Sie zurücksetzen wollen, den "Place", "Blend" und zwei Tonbedienungen der mittleren Position. Klicken Sie nun den Model Select Knopf nach unten bis das Anzeigelicht aufhört zu blinken. Das Modell sollte nun zurückgesetzt sein auf die Werkseinstellung. Benutzten Sie diesen Vorgang für jedes Modell, welches Sie auf Werkseinstellung wiederherstellen wollen. Die Variax Bass Serie kann außerdem "reflasht" werden indem man die Methode der Variax Electric Gitarren benutzt, wie oben beschrieben. Instructions du reflash et mise à jour Variax Suivez cette liste de contrôle avant de mettre à jour la firmware Flash Memory de votre guitare Variax pour être sûr qu'une mise à jour peut-être installé avec succès: Assurez-vous que l'interface pour connecter la guitare JTV à l'ordinateur (Workbench Interface, PODxt Live/Pro, POD X3 Live/Pro, POD HD500/HD Pro, Vetta II) n'est pas connectée à l'ordinateur via un hub USB. Connectez l'interface directement sur un port USB en arrière de l'ordinateur. Si vous avez des problèmes, essayez tous les ports USB de l'ordinateur. Évitez de brancher sur les ports USB sur les claviers, moniteurs ou stations d'accueil pour ordinateur portable. [*]Si vous utilisez l'interface Workbench pour mettre à jour la guitare, assurez-vous qu'une batterie chargée est dans la guitare et un câble TS mono 6.35mm est branché dans le jack de sortie de la guitare pour l'allumer. [*]Le bouton Volume ne doit pas être sur la position "0" parce que ca met la guitare dans le mode économie d'énergie. Mettez-le sur une autre position que "0". [*]Veuillez utiliser le câble VDI fourni avec la guitare JTV si vous mettez le Flash Memory (firmware de la guitare) à jour. Évitez d'utiliser des câbles CAT5/VDI plus long que 3 mètres pour la mise à jour. [*]Pendant la mise à jour, cliquez sur "NO" pour la question "keep presets on the guitar". Utilisez le logiciel Workbench pour sauvegarder vos presets avant que vous mettez la firmware à jour si vous les voulez garder. [*]Fermez tous les autres programmes inutiles avant que vous mettez la JTV à jour. Comment est-ce que je peux réinstaller ou mettre à jour le Flash Memory de ma guitare Variax Electric 300, 500, 600, 700 ou James Tyler Variax? Ces instruments peuvent seulement être réinitialisés sur les paramètres d'usine en réinstallant Flash Memory. Pour réinstaller Flash Memory, vous avez besoin de connecter votre guitare via interface (Variax Hardware Interface, POD XT/X3 Live, POD X3 Pro, Vetta avec VDI ou POD HD500) USB à votre ordinateur. Si guitare et interface sont connectées à l'ordinateur, démarrez Line 6 Monkey. Pour plus d'informations sur la connexion d'une interface à l'ordinateur, cliquez les liens ci-après: Line 6 Monkey Installation and F.A.Q. USB Connectivity with Line 6 Devices Si Monkey est installé et votre ordinateur a reconnu la connexion, suivez ces instructions pour un reflash: 1. Quand Monkey a lancé, le logiciel vous demande éventuellement à registrer, si vous ne voulez pas enregistrer ou vous êtes déjà enregistré, vous devez cliquer "Remind me Later". 2. Si vous voulez réinitialiser les presets d'usine (= mettre à jour le firmware) choisissez "Flash Memory" et cliquez "Reinstall Latest". 3. Cliquez "OK" si vous êtes d'accord avec la licence du logiciel. 4. Cliquez "Oui" ou "Non" si vous voulez ou voulez pas garder les Patches sur votre instrument. 5. Cliquez "Oui" pour lancer la mise à jour. Déconnectez votre guitare jamais pendant la mise à jour. 6. Line 6 Monkey réinitialise l'appareil et mets à jour la Flash Memory. À droite, vous pouvez voir la barre bleue pour voir le progrès. 7. Après la mise à jour, vous devez cliquer "OK". Reflash de la Variax Bass 700/705: Pour ces guitares, vous devez réinitialiser les paramètres d'usine individuellement. Choisissez le modèle, que vous voulez réinitialiser, le "Place", "Blend" et deux configurations de ton des positions en milieu. Cliquez sur le bouton "Model Select" jusqu'à ce que la lumière cesse de clignoter. Le modèle doit maintenant être réinitialisé. Répétez cette méthode pour les autres modèles que vous voulez réinitialiser. La série Variax Bass peut également être "reflashé" en utilisant la méthode des guitares Variax Electric, comme décrit au-dessus.
  6. Deutsch Français Q: Where can I find videos on how to use the Spider IV amplifier? Spider IV movies Q: Where can I download the Spider IV Pilot's Guide and Advanced Guide? Spider IV Advanced Guide Spider IV Pilot's Guide Q: What are the presets on my Spider IV amplifier? A: The user presets and artist/song presets for the Spider IV can be seen at Spider IV presets.xlsx. There are the 64 user-programmable presets, over 350 Artist Presets, and over 200 song and effect-based presets. Be aware that the artist, song, and effect based presets cannot be saved in their current location, but you can modify and/or store these setting in one of the 64 user-programmable presets. If you would like to return your unit to the original presets, please perform a factory reset. Q: How are the preset banks categorized? A: The User, Artist, and Song Banks can be navigated by using the left/right buttons on the four-way selector. You can navigate through the banks once you are in the specific area using the up/down buttons on the four-way selector, then once you are in the specific bank you can access the individual presets by turning the presets encoder key. Q: How do I perform a factory Reset on the Spider IV series amplifiers? A: Hold the A button as you power the unit on, then press the presets encoder once. ***NOTE: If an FBV controller is connected to the Spider IV during the Factory Reset, the LCD screen on the FBV will go blank. To return the display, simply press a footswitch on the FBV or disconnect/reconnect the CAT5 cable to the FBV. Q: Where are the "bonus" presets that are not programmed into the amp? Spider IV 75, 120, 150 and HD150 - Song Settings Q: Is there an editor for the Spider IV (75, 120, 150, 150 HD) series amplifier? A: Yes, see the following link for details: Spider IV Edit v1.02 FAQ Q: What are the amp models on the Spider IV 75/120/150/150HD?* Clean Red - Based on the clean channel of the Marshall® JCM 900, the first true modern high gain amp from Marshall. Select Clean Red to get crisp, amazing clean tones, great warm jazz tones, and all the high-end shimmer you’ll need with a generous amount of bottom end. Clean Green - We developed this amp model to emulate those late 60s and early 70s clean tones. We modeled a 1973 Hiwatt® custom 100, then extended the tone control range and tightened up the low end for that big, ringing sound. Twang Red - This amp model draws on our analysis of mid 60s Fender® amps, in particular the blackface ’65 Twin Reverb®. We wanted that classic, glassy high end tone, with enough snap and bite for some serious chick’n pick’n. Things don’t get too crunchy until you reach the top range of the Drive knob. Twang Green - There’s nothing like the sound of the classic Fender® blackface Deluxe Reverb®, the Holy Grail for many blues, country and roots rockers. Class A Red - Ready, steady....GO! This amp model is based on a Vox® AC-30 amplifier with an updated and expanded TBX tone control circuit. We wanted to capture that early pop rock tone that many British invasion bands are so well known for. Class A Green - There are some great modern amps out today based on the legendary tones of yesteryear. Here’s our take on the EL84 circuit of a Divided By 13 9/15 Model. Blues Red - This amp model is inspired by that famous vintage tweed sound we all know and love. We evaluated a ’53 Fender® wide panel Deluxe and this is what we came up with. Blues Green - Blues Green is based on a Gretsch® 6156, a 1960 1x10 combo from the days when rock’n’roll took the blues to a new level. Add some reverb and a slap echo and be-bop-alu-la! Crunch Red - This sound was crafted during our studies of the ‘68 Marshall® Plexi 50 Watt, which was used by a number of early metal bands. Hi Gain Red provides a wider range of tone control settings than the original jumpered Marshall®, allowing you to bump up the mids even at the highest Drive settings. Crunch Green - Here’s our inspired interpretation on a 2005 Orange® AD-30TC, a 30 watt, Class A head that oozes pure Brit rock tone, taking 60s crunch to a new level. Hi Gain Red - Plexi On Fire! This amp model is based on a ‘68 Marshall® Plexi 100 watt with a few added extras; the combination of a Variac and the jumpered input channels creates that infamous brown sound that will feel like flames are shooting out the input jack! Hi Gain Green - Hi Gain Green was inspired by the Diezel® Herbert, the 180 watt Ducati of high performance guitar amplifiers, featuring a huge, tight low end. Metal Red - For this amp model we took the classic Mesa/Boogie® Dual Rectifier® and added a few enhancements. The resulting Amp Model has a definite modern flavor. This monster truck of tone delivers a bottom end that’s big, powerful, tight and fast. Use Metal Red to get a punchy, high gain Metal sound. Metal Green - This sound was created to be an aggressive high gain Amp Model with a unique Mid control that will sweep though an entire spectrum of tone on one knob. With the Mid knob is set to minimum, the distortion exhibits Fuzz pedal characteristics. When set to noon, it mimics the creamy modern high gain amp tones. And when turned up to max, it’s reminiscent of that maxed out Class A sound. Of course there are all the places in-between... Insane Red - This model is our “dialed in for shredding� version of the Mesa/Boogie® Dual Rectifier® red channel. It combines the intensity and impact of Metal Red, but delivers more midrange and teeth for that bone-crushing, brain piercing insane grind. Insane Green - Our goal with Insane was to provide you with as much input gain distortion as possible short of complete meltdown. You get an obscene helping of distortion, while still retaining tonal definition and character. As a result, you get way more bottom end and cabinet character than other small amps. Crank up the Drive control and prepare to dominate! *All product names are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These product names and descriptions are provided for the sole purpose of identifying the specific products that were studied during Line 6’s sound model development. HIWATT® is a registered trademark of Fernandes Company, Ltd. FENDER®, TWIN REVERB® and DELUXE REVERB® are registered trademarks of Fender Musical Instruments Corporation. VOX® is a registered trademark of Vox R&D Limited. MARSHALL® is a registered trademark of Marshall Amplification Plc. GRETSCH® is a regustered trademark of Fred W. Gretsch Enterprises, Ltd.ORANGE® is a registered trademark of Orange Personal Communications Services Ltd. MARSHALL® is a registered trademark of Marshall Amplification Plc. MESA/BOOGIE® and RECTIFIER® are registered trademarks of Mesa/Boogie, Ltd. DEIZEL® is a regiustered trademark of Deizel GMBH. Q: What is “Manual Mode�? A: When the Manual button is lit, Spider IV is operating in “Manual Mode�, meaning that all of the controls are active and the sound of the amp is determined by the current knob settings. If you are not in Manual Mode and would like to be, simply press the “manual� button. You can exit manual mode by selecting the “manual� button again, or pressing the buttons for A-D. Q: What are the specifics of the Smart Harmony effect on the Spider IV (75-150) Series? A: The Smart Harmony can be placed “pre� or “post� amp, and can perform diatonic harmony for any root note (A through G#) from a unison (no change) to a ninth interval (up to seven steps) above or below the root note. The scales included in the Smart Harmony include Major, Natural Minor, Pentatonic Major, Pentatonic Minor, Harmonic Minor, Melodic Minor, Whole tone, and Diminished scale. The overall mix of the Smart Harmony effect can be programmed and stored per patch from 0-100%. Q: What are the specifics of the Pitch Glide effect on the Spider IV (75-150) Series? A: The Pitch Glide can be placed “pre� or “post� amp, and the Heel and Toe positions of the FBV can be programmed two octaves above or below the incoming note in ½ steps (semi-tones) increments. Be aware that the number “7� in this situation equals 3.5 steps (because of the half step measurements) rather than an interval of a seventh (5.5 steps) that would be heard when using the Smart Harmony effect. The overall mix of the Pitch Glide effect can be programmed and stored per patch from 0-100%. Q: Where can I learn more about using the Smart Harmony and Pitch Glide features? Q: I already have an original FBV controller, will this work on the Spider IV 75-150 series? A: The FBV (Mk I) controllers will control most of the standard functions on the Spider IV 75-150 series with a few limitations. Here is a breakdown of the limitations: FBV Express 1. The FBV Express (Mk I) cannot punch in and out overdubs. It just starts record once for a single pass. The FBV Express Mk II can control the overdub feature. 2. The FBV Express (Mk I) cannot arm the Quick Loop. The quick loop must be armed by pressing the amp front panel. The FBV Express MkII can arm the Quick Loop by pressing down either the A+B or C+D footswitches. This is what takes you out of Looper mode as well. FBV Shortboard The FBV Shortboard (Mk I) cannot arm the Quick Loop. The quick loop must be armed by pressing the Quick Loop button on the front panel. The FBV Shortboard MkII can arm the Quick Loop by pressing the (new) Function 2 button. Overdubbing works on both original and current Shortboards. All other functions are available on the FBV Mk I pedals as their Mk II counterparts. Due to the new effects layout, the FBV Shortboard FX Loop button will activate the Boost setting in the Spider IV 75-150. On the FBV Shortboard Mk II this button is labeled “Function 1�. Q: What are the specifics on the Looper function of the Spider IV (75-150) Series? A: The Spider IV (75 and above) has a 14 second looper on the amplifier that can be activated by the face of the unit or the FBV Mk II series controllers. See the following video for more looper information: Q: How do I connect the Spider IV 150/HD to the Spider Cabinet? A: The Spider IV 150 and HD is designed to see a load on *both * speaker outputs by connecting the left and the right inputs to the Spider cabinet with speaker cables. Running the Spider IV 150/ HD into a 4 ohm load may result in damage to the amplifier. Please see the following link for more information: Cabinet Connection and Ohm F.A.Q Q: Can I use two Spider cabinets with the Spider Series HD 150? A: The Spider IV 150 and HD were designed to power a single Spider Stereo Cabinet with a stereo 8 ohm load. Using two Spider cabinets would require a modification to each cab so that they are each rewired to produce a 16 ohm mono load. This modification would preferably be done by an authorized Line 6 service center, which can be located from the Service Center link on the Support page. Q: How do I connect external speakers to my Spider IV 150 amplifier? A: Line 6 recommends disconnecting the internal speakers (covering the dry-solder clips with electrical tape) and connecting both external speaker outputs to an 8 ohm (or 16 ohm) load. Do not connect just one side, as this may cause a power amp failure. Powering the internal speakers along with a external speakers may cause a power amp failure and is not supported. Q: What type of speaker is used on the Spider IV series? Spider IV 15: Custom 15 (4 ohm) Spider IV 30: Celestion G12E50 (4 ohm) Spider 1V 75/150: Celestion G12P80 (8 ohm) Spider IV 120: (2) Celestion G10P80 (8 ohm) Q: Where can I get a cover or replacement knobs for my Spider IV amplifier? A: Line 6 Store Wo kann ich Videos zur Nutzung des Spider IV Verstärkers finden? Spider IV movies Wo kann ich Benutzerhandbücher herunterladen? Spider IV Advanced Guide Spider IV Pilot's Guide Welche Presets kann ich auf dem Spider IV finden? All User, Artist und Song Presets können Sie hier finden: Spider IV presets.xlsx Insgesamt sind 64 selbsteinstellbare Presets, über 350 Artistenpresets sowie über 200 Song- und Effektpresets enthalten. Die Artist, Song und Effekt Presets können nur verändert und abgespeichert werden indem Sie sie in eine der 64 User Banken abspeichern und dann von dort aus editieren. Wenn Sie das Gerät zurück auf die Originalpresets zurückstellen wollen, dann müssen Sie das Gerät auf Werkseinstellungen zurücksetzen. Gibt es verschiedene Kategorien für die Presets? Die Presets sind in User, Artist und Song Presets eingeteilt. Nutzen Sie zur Auswahl einfach die rechts-links Pfeiltasten. Sobald Sie dann in einer der Abteilungen sind, können Sie die Bank anhand der rauf-runter Pfeile auswählen und hier können Sie dann die verschiedenen Presets mit dem Preset Knopf ansteuern. Wie kann ich das Gerät auf Werkseinstellungen zurücksetzen? Halten Sie dazu den A Knopf beim Starten des Gerätes gedrückt und drücken Sie den Presets Knopf einmal. Achtung, wenn ein FBV Controller während des Zurücksetzens angeschlossen ist, dann wir der Bildschirm sich leeren. Um wieder ein Bild zu bekommen brauchen Sie nur einen Fußschalter zu drücken oder das CAT5 Kabel neu einzustecken. Wo sind die Bonus Presets, die einprogrammiert sind? Spider IV 75, 120, 150 and HD150 - Song Settings Gibt es einen Editor für die Spider IV 75, 120, 150 und 150HD Verstärker? Ja: Spider IV Edit v1.02 FAQ Welche Verstärkermodelle gibt es auf dem Spider IV? Clean Red: Auf Basis des Clean Kanals eines Marshall® JCM 900, der erste moderne High Gain Verstärker von Marshall. Wählen Sie Clean Red für knackigen, klaren Sound und warme Jazz Töne. Zusätzlich bietet das Modell Viel Bass. Clean Green: Dieses Modell wurde dazu entworfen nach den sauberen 60er und 70er Tönen zu klingen. Wir haben dazu einen Hiwatt® custom 100 als Vorlage verwendet und die Tonreichweite modifiziert für einen tollen klingelnden Sound. Twang Red: Dieses Modell ist das Resultat unserer Analyse von Fender® Verstärkern der 60er Jahre, ganz besonders des 65er Blackface Twin Reverb®. Unser Ziel war ein klassisch glasiger Ton, der aber nicht zu krass nach oben hin klingen soll, wenn man Drive aufdreht. Twang Green: Auf basis des einzigartigen Fender® Blackface Deluxe Reverb®. Class A Red: Auf Basis eines Vox® AC-30 mit modifizierter TBX Kontrolleinheit für tollen englischen Pop Rock Sound. Class A Green: Es gibt viele modern Verstärker, die auf Tönen von alten Verstärkern basieren. Hier ist unser Modell nach einem EL84 Schaltkreis eines Divided By 13 9/15. Blues Red: Auf Basis eines 53er Fender® Deluxe. Blues Green: Auf Basis eines Gretsch® 6156, eine 1x10 Combo von 1960. Crunch Red: Auf Basis eines 68er Marshall® Plexi 50 Watt. Crunch Red hat mehr Ton Kontrolle als der original Marshall Verstärker sodass Sie die Mitten auch bei hohen Drive Einstellungen noch aufdrehen können. Crunch Green: Unsere Interpretation eines 2005er Orange AD-30TC 30Watt. Purer englischer Rock Sound der Klasse A. Hi Gain Red: Auf Basis des 68er Marshall Plexi 100Watt mit ein paar kleineren Extras. Für den berüchtigten „Brown Sound“. Hi Gain Green: Auf Basis eines Diezel® Herbert, ein 180Watt Verstärker mit ungleublicher Performance. Metal Red: Für dieses Modell haben wir den Sound eines Mesa/Boogie® Dual Rectifiers® modelliert und leicht verändert für einen etwas moderneren Ton. Nutzen Sie Metal Red für druckvollen High Gain Sound. Metal Green: Ein aggressives High Gain Modell mit einzigartiger Kontrolle über die Mitten. Auf dem Minimum können Sie Fuzz Karakteristiken erzeugen, auf 12 Uhr bekommen Sie einen modernen High Gain Sound und voll aufgedreht bekommen Sie einen Class A Sound und dann gibt es natürlich noch alles dazwischen. Insane Red: Unsere Shredding Version des roten Kanals eines Mesa/Boogie® Dual Rectifiers®. Eine Kombination von Metal Red mit mehr Mitten. Insane Green: Dieses Modell soll so viel Input Gain wie nur möglich liefern mit extremer Verzerrung. Das Modell behält bei der abgefahrenen Verzerrung aber immernoch die Definition und den Charakter. Mehr Bassbox Karakter als die meisten kleineren Verstärker liefern können. *Alle in diesem Dokument erwähnten Produktnamen sind Marken der jeweiligen Besitzer, welche weder zu Line 6 gehören noch mit Line 6 assoziiert sind. Die vorher genannten Marken werden in diesem Dokument nur zur Identifikation der Produkte verwendet, deren Sounds und Klänge Line 6 studiert hat während des Sounddesigns der verschiedenen genannten Line 6 Modelle. HIWATT® ist ein eingetragenes Warenzeichen von Fernandes Company, Ltd. FENDER® TWIN REVERB® und DELUXE REVERB® sind eingetragene Warenzeichen von Fender Musical Instruments Corporation. VOX® ist ein eingetragenes Warenzeichen von Vox R&D Limited. MARSHALL® ist ein eingetragenes Warenzeichen von Marshall Amplification Plc. GRETSCH® ist ein eingetragenes Warenzeichen von Fred W. Gretsch Enterprises, Ltd. ORANGE® ist ein eingetragenes Warenzeichen von Orange Personal Communication Services, Ltd. MESA/BOOGIE® und RECTIFIER® sind eingetragene Warenzeichen von Mesa/Boogie, Ltf. DIEZEL® ist ein eingetragenes Warenzeichen von DIEZEL GmbH. Was ist der „Manual Mode“? Wenn der Manual Mode Knopf leuchtet, dann ist der Manual Mode eingeschaltet, der Ihnen volle Knotrolle über den Verstärker verleiht. Alle Einstellungen sind also aktiv und der Ton des Verstärkers hängt vollkommen von den Einstellungen der Knöpfe ab. Drücken Sie einfach den „Manual“ Knopf um den Manual Mode ein- und auszuschalten. Was sind die Spezifikationen des Smart Harmony Effektes auf den Spider IV 75-150 Verstärkern? Der Smart Harmony Effekt kann auf Pre oder Post gestellt werden und liefert eine diatonische Harmonie für alle Grundtöne vom Einklang zum neunten Intervall über oder unter der Grundnote. Enthalten sind Major, Naural Major, Pentatonisches Major, Pentatonisches Moll, harmonisches Moll, melodisches Moll, voller Ton sowie eine verminderte Skalierung. Der Mix das Effektes kann von 0 bis 100% eingestellt und einzeln auf Patches abgespeichert werden. Was sind die Spezifikationen des Pitch Glide Effektes auf den Spider IV 75-150 Verstärkern? Der Pitch Glide Effekt kann auf Pre oder Post gestellt werden und die zwei Pedal Stellungen des FBV können auf 2 Oktaven rauf und runter in Halbschritten programmiert werden. 7 bedeutet in diesem Fall also 3,5 Schritte anstelle eines siebtel Intervalls, wie man es sich eigentlich vorstellen könnte. Der Mix das Effektes kann von 0 bis 100% eingestellt und einzeln auf Patches abgespeichert werden. Wo kann ich mehr über Smart Harmony und Pitch Glide lernen? Ich habe bereits einen original MkI FBV Controller, funktioniert dieser mit dem Spider IV 75-150? Die meisten Hauptfunktionen sind auf den MkI Boards belegt mit ein paar wenigen Ausnahmen: FBV Express: Es kann keine Overdubs benutzen, es fängt einfach an aufznehmen. Dieses Problem besteht nicht bei dem MkII. Der Quick Loop funktioniert nur bedingt, Sie müssen Ihn am Frontpanel des Verstärkers starten. Beim MkII kann Quick Loop ganz einfach durch den Druck der Fußschalter A+D oder C+D gestartet werden. FBV Shortboard: Der Quick Loop funktioniert nur bedingt, Sie müssen Ihn am Frontpanel des Verstärkers starten. Beim MkII kann Quick Loop ganz einfach durch den Druck des Function 2 Knopfes gestartet werden. Overdubbing funktionert auf MkI sowie MkII. Alle anderen Funktionen sind auf dem MkI (dem originalen Shortboard) funktionstüchtig. Aufgrund des neuen Layouts jedoch, aktiviert der FX Loop knopf am alten Shortboard die Boost Einstellung und am neuen (MkII) heißt dieser Knopf „Function 1“. Was sind die Spezifikationen der Looper Funktion auf den Spider IV 75-150 Verstärkern? Der Spider IV (75 oder höher) hat eine 14 Sekunden Looper Funktion eingebaut die vorne auf dem Verstärker aktiviert werden kann. Wie kann ich mein Spider IV 150/HD an ein Spider Cab anschließen? Die Spider IV 150 und 150 HD sind dazu entworfen eine Last auf beiden Lautsprecherausgängen zu haben. Schließen Sie also bitte beide Ausgänge an die Box anhand von Lautsprecherkabeln an. Den Verstärker an eine 4 Ohm Last anzuschließen kann den Verstärker beschädigen: Cabinet Connection and Ohm F.A.Q Kann ich zwei Spider Boxen an den Spider 150 HD Verstärker anschließen? Der Verstärker ist dazu entworfen eine einzige Box angeschlossen zu haben mit stereo 8 Ohm Last. Um 2 Boxen anzuschließen, müssten beide Boxen modifiziert werden um 16 Ohm Mono zu erzeugen. Die Modifikation kann bei einem Line 6 Service Center durchgeführt werden. Wie kann ich externe Lautsprecher an den Spider IV 150 anschließen? Wir empfehlen die inneren Lautsprecher vom Verstärker zu trennen und beide externe Lautsprecher Ausgänge an 8 oder 16 Ohm anzuschließen. Aber schließen Sie immer beide Seiten an, nicht nur eine einzelne denn dies kann zu Endstufenproblemen führen. Die internen zusammen mit externen Lautsprechern anzuschließen kann auch zu Fehlern in der Endstufe führen und ist nicht unterstützt. Welche Lautsprecher werden in die Spider Verstärker eingebaut? Spider IV 15: Custom 15 (4Ohm) Spider IV 30: Celestion G12E50 (4Ohm) Spider IV 75/150: Celeston G12P80 (8Ohm) Spider IV120: 2x Celestion G10P80 (8Ohm) Wo kann ich Ersatzteile oder in Schutzhülle für mein Spider IV kaufen? Line 6 Store Ou puis-je trouver des vidéos sur l’utilisation du Spider IV? Spider IV movies (Attention, les vidéos sont en anglais.) Ou puis-je télécharger le mode d’emploi du Spider IV ? Spider IV Advanced Guide Spider IV Pilot's Guide Quels sont les presets sur l’ampli Spider IV? Trouvez tous les presets User et Artist/Song ici : Spider IV presets.xlsx . Le Spider IV a 64 presets User, plus que 350 presets Artiste et 200 presets Song et sur base d’effets. Les presets Artist, Song et sur base d’effets ne peuvent pas être enregistrés dans la position courante mais vous pouvez les modifier ou enregistrer dans une des banques User. Si vous voulez retourner votre appareil à cause d’une erreur ou un problème. Comment est-ce qu’on classe les presets en catégories ? Vous pouvez naviguer entre presets User, Artiste et Song avec les boutons gauches et droite. Si vous êtes dans une banque, vous pouvez naviguer pour chercher Comment puis-je réinitialiser l’appareil ? Maintenez enfoncé le bouton A en allumant l’appareil. Après ca, poussez le bouton Presets. Attention, si un contrôleur FBV est connecté au Spider IV pendant la réinitialisation, l’écran du FBV se vide. Poussez un des commutateurs aux pieds ou reconnectez le câble CAT5 pour réactiver l’écran. Ou puis-je trouver les presets « bonus » pas programmé dans l’ampli ? Spider IV 75, 120, 150 and HD150 - Song Settings Y a t il un éditeur pour les Spider IV ? Spider IV Edit v1.02 FAQ Quels sont les modèles d’ampli sur les Spider IV ? Clean Red: Basé sur le canal clean du Marshall® JCM 900 le premier amplificateur moderne à gain élevé. Sélectez Clean Red pour un son clair, un ton jazz chaud et beaucoup du basse. Clean Green: Ce modèle était développé pour les sons clairs des amplis des années 60 et 70. Ce modèle est basé sur un Hiwatt® 1973 custom 100. Twang Red: Ce modèle est le résultat de nos analyses des amplis Fender® des années 60. En particulier, le Le 65 Blackface Twin Reverb®. On a essayé d’imiter ce son classique, de gain élevé. Le son ne devient pas trop crunchy jusqu’à ce que vous tourniez au bouton Drive. Twang Green: Basé sur le Fender® Blackface Deluxe Reverb®. Class A Red: Basé sur un Vox® AC-30 avec circuit de contrôle TBX modifié. On a essayé d’enregistrer le on pop rock des groupes anglaises. Class A Green: Basé sur le circuit EL84 d’un Divided By 13 9/15. Blues Red: Basé sur un Fender® Deluxe de 1953. Blues Green: Basé sur un Gretsch® 6156, un combo de 1960 1x10. Crunch Red: Basé sur un Marshall® Plexi 50 Watt de 1968. Crunch Green: Basé sur un Orange® AD-30TC de 2005. 30Watt classe A. Hi Gain Red: Basé sur un Marshall® Plexi 100 Watt de 1968 avec des extras. Hi Gain Green: Basé sur un Diezel® Herbert 180 Watt. Metal Red: Basé sur un Mesa/Boogie® Dual Rectifier® amélioré. Le modèle est un peu moderne. Metal Green: Un modèle de gain élevé très agressive avec un contrôle des mis spéciale. Le bouton des mis sur le minimum et vous recevez des distorsions comme un pédale Fuzz. Sur le maximum, c’est un son comme un ampli Classe A. Insane Red: Basé sur un Mesa/Boogie® Dual Rectifier® avec plus de mis. Insane Green: Le maximum de distorsion d’entrée possible. *Tous les noms de produits dans ce document sont des marques déposées des propriétaires respectifs. Ces noms de produits ne sont pas affiliés ou associés avec Line 6, ils sont uniquement utilisés pour identifier les produits de ces fabricants. HIWATT® est une marque déposée de Fernandes Company, Ltd. FENDER®, TWIN REVERB® et DULXE REVERB® sont des marques déposées de Fender Musical Instruments Corporation. VOX® est une marque déposée de Vox R&D Limited. MARSHALL® est une marque déposée de Marshall Amplification Plc. GRETSCH® est une marque déposée de Fred W. Gretsch Enterprises, Ltd. ORANGE® est une marque déposée de Orange Personal Communications Services Ltd. MESA/BOOGIE® et RECTIFIER® sont des marques déposées de Mesa/Boogie, Ltd. DIEZEL® est une marque déposée de Diezel GmbH. Qu'est-ce que le « Manual Mode » ? En mode manuel, tous les contrôles sur le Spider IV sont activés et le son de l’ampli est déterminé par les postions des boutons. Poussez le bouton Manual pour entrer le mode manuel. Poussez le bouton encore une fois pour désactiver ce mode. Quels sont les spécifications pour l’effet Smart Harmony sur un Spider IV ? Vous pouvez le mettre en Pre ou en Post et peut faire une harmonie diatonique pour tous les notes de base d’un unisson à au 9ième intervalle (c’est jusqu’à 7 étapes) dessous ou dessus de la note originale. Inclus sont : Majeur, Mineure naturelle, Pentatonique majeur, Pentatonique mineur, Mineure harmonique, Mineure mélodique, Ton entier, et échelle réduite. Le mix peut être programmé et enregistré par patch de 0 à 100%. Quels sont les spécifications pour l’effet Pitch Glide sur un Spider IV ? Vous pouvez le mettre en Pre ou en Post et les deux positions du contrôleur FBV peuvent être programmées pour deux octaves dessus ou dessous la note d’entrée en incréments de ½. 7 veut dire que ce sont 3,5 étapes. Vous pouvez aussi programmer le Mix de l’effet et l’enregistrer entre 0 et 100% par patch. Ou puis-je apprendre plus sur ces deux effets ? J’ai déjà un contrôleur FBV original, est-ce qu’il fonctionne avec le Spider IV? Oui, mais avec quelques limitations : FBV Express : Vous ne pouvez pas configurer les overdubs. Il simplement enregistre une fois. Vous ne pouvez pas utiliser Quick Loop. Lancez-le avec le panneau de l’ampli. FBV Shortboard : Vous ne pouvez pas utiliser Quick Loop. Lancez-le avec le bouton Quick Loop. Quels sont les spécifications pour la fonction Looper sur les Spider IV ? Les Spider IV 75 et ci-dessus on un looper de 14 secondes. Comment puis-je connecter le Spider IV 150/HD à un baffle Spider ? Vous devez toujours connecter les deux sorties gauche et droit au baffle avec des câbles d’haut parleurs. La connexion du Spider IV à une 4 Ohm Impédance peut endommager l’ampli : Cabinet Connection and Ohm F.A.Q Puis-je utiliser deux baffles avec le Spider HD 150? L’ampli doit être modifié pour faire fonctionner deux baffles avec un ampli. Un Line 6 Centre Service peut faire cette modification. Comment puis-je connecter des haut-parleurs externes à mon ampli Spider IV 150 ? Déconnectez les haut-parleurs internes et connectez les deux sorties haut parleurs à 8 ou 16 Ohm. Ne connectez pas seulement une côté. Ne connectez pas des haut-parleurs externes ET les internes en même temps, ce peut endommager l’ampli. Quels haut-parleurs sont utilisés dans les amplis Spider IV ? Spider IV 15: Custom 15 (4Ohm) Spider IV 30: Celestion G12E50 (4Ohm) Spider IV 75/150: Celestion G12P80 (8Ohm) Spider IV 120: 2x Celestion G10P80 (8Ohm) Ou puis-je acheter des remplacements ou une couverture pour men ampli? Line 6 Store
  7. Note: The Spider III was released in 2006 and discontinued in 2010. The Spider III is now listed as a Legacy Product. Q: How are the Artist preset banks categorization and alphabetized? A:When looking at the list of the banks in the unit, the banks seem to be broken into four different sections: 1. Albert Lee - Julien K 2. Ash - Volto 3. The Accident Experiment - Thursday 4. Songs 50's - Misc. Fun Each of the first 3 sections (artist banks) is alphabetized. Is there a reason all the artist presets overall aren't alphabetized? The artist banks are categorized by Clean, Dirty and Heavy: 1. Albert Lee - Julien K: Cleaner patches 2. Ash - Volto: Midgainy patches 3. The Accident Experiment - Thursday: Heavily overdriven patches Q: How do I perform a factory reset on my Spider III? Line 6 Device Factory Reset Procedures Q: How do I use the compare mode (to find where the knobs were originally set)? A: Press and hold the Tap button, then turn the Amp Models knob. This activates Spider III's "Compare mode". Now turn any knob other than Amp Model and Master Volume, and the channel lights will tell you whether you need to turn that knob up (Channel A lights) or down (Channel D lights) to match the stored setting. The Channel B & C lights will be lit at the same time once the knob position matches the stored setting exactly. Q: How do I connect the Spider III HD 150 to the Spider Cabinet? A: The Spider III HD 150 is designed to see a load on *both * speaker outputs by connecting the left and the right inputs to the Spider cabinet with speaker cables. Running the Spider III HD 150 into a 4 ohm load may result in damage to the amplifier. Please see the following link for more information: Cabinet Connection and Ohm F.A.Q. Q: Can I use two Spider III cabinets with the Spider III HD 150? A:The Spider III HD 150 was designed to power a single Spider III Stereo Cabinet with a stereo 8 ohm load. Using two Spider III cabs would require a modification to each cab so that they are each rewired to produce a 8 ohm mono load. This modification would preferably be done by an authorized Line 6 service center, which can be located from the Service Center link on the Support page. Q: How do I connect external speakers to my Spider III 150 amplifier? A: You will need to disconnect the internal speakers (covering the dry-solder clips with electrical tape) and connect both external speaker outputs to an 8 ohm (or higher) load. Do not connect just one side, as this may cause a power amp failure. Powering the internal speakers along with a external speakers may cause a power amp failure and is not supported. Q: What type of speaker is used on the Spider III combo series? Spider III 15: Custom 15 (4 ohm) Spider III 30: Celestion G12E50 (4 ohm) Spider III 75/150: Celestion G12P80 (8 ohm) Spider III 120:(2) Celestion G10P80 (8 ohm)
  8. Hi All, New to the forum having just purchased a used PODxt. My issue is after downloading Monkey and performing all of the updates the Flash Memory option is grayed out and will not let me update to the latest version of 3.01. Monkey doesn't seem to be able to ascertain what the Flash Memory is on my PODxt (as it has a dash '–') in the 'Installed' column whereas everything else is up to date. I have a feeling that this PODxt has never been updated. The PODxt functions correctly with all the original presets working but one of the reasons I would like to reset it is that only 25% of the LED display works and I was hoping a factory reset may correct that issue (if it's software based that is). I'll hook the unit up and post some pictures. Any help would be greatly appreciated. Cheers, Graham
  9. 1. Launch Helix Native inside your DAW. 2. Click on the icon for Helix Native in the lower middle of the app. 3. In the new floating window for the app's Settings, click on “Restore Factory Setlists.” 4. Confirm that you want to restore the factory defaults and you’re done.
  10. Hi, Just got my new Amplifi 75, installed the drivers and updater, then tried to update the amp on my WIndows 10 computer (I do not have another computer or access to an iOS device). The update failed- it started but never showed any progress on the progress bar, then quit and told me to put the amp into update mode. Repeatedly put amp into update mode and retried and it failed repeatedly. Tried 2 different USB cables on every port on the computer, still failed. Uninstalled and reinstalled the drivers and updater repeatedly and still failed. Now the amp won't even go into update mode-- where before, the amp would pop to signify being in update mode and the tone lights would be off, now when I try to put into update mode, the tone A light lights up, followed by the other three lights lighting up solid (not blinking)-- it won't do anything when in whatever mode this is. Switching the amp off and on when the lights are lit solid puts the lights back into flashing "update failed" mode. I've tried to do the factory reset repeatedly, but this just puts the amp back into the mode where all 4 lights are lit solid. I've put in a support ticket, but am not really confident that Line 6 is going to respond effectively, or at all. Has anyone experienced this total failure? Is there a fix I haven't tried yet? Should I just send the thing back? Thanks,
  11. Is there any way to restore the factory presets or (reset the Hd 400? Mine came with a. Broken preset toggle button I can get totheaction and it says press (enter) and the enter button happeneds to be the preset button that was broken before I bought it
  12. Not sure if anyone would need this but here it is anyway. When i got my POD (being a first time user) i thought it would be a good idea to back up the factory presets in case i did some DUMB lollipop...
  13. Hi there, Wow, long long time wothout posting here ;o) I am still the owner of a mark 1 SV 112 and still hppy with it. I never experienced the overheating DSP problem leading to neverending ressting of the amp, but it is true that I seldom used it at high volume for long periods of time. I only gigged twice with it and have played it in my personal home studio at home mostly. What I would have liked to know is if this problem is systematic with MK1 SVs or if it is completely random. I mean, have there been random series that have the problem and others that don't have it ? I have the Strymon SVPre that I installed when it came out and the DSP board is, it seems, the first make (Revision A from 2007). So far, I have never experienced the problem. If I ever do, I'll try to fix it with a heatsink on the overheating areas of the board, but I'd really like to know if this is a randomly happening problem. If not, I might have just got a series without the flaw and I'll be glad about it ;o) Thanks a lot for your answers. Jay
  14. Line6Will

    Pod HD Series Reset Procedures

    Pod HD300/HD400 Factory Reset: Hold down the A footswitch while powering the unit on. Press the PRESETS knob, then press it again. Video Tutorial No Global Settings reset Pod HD/HD500/HD500x/HD Pro/HD ProX Global Settings Reset: Hold down the left arrow on the navigation button while powering the unit. Factory Reset: You must reinstall the firmware, when Monkey prompts you if you want to keep your existing presets, hit no. Video Tutorial Safe/Pedal Calibration Mode: Hold down the right arrow on the navigation button while powering the unit.
  15. As long as firmware updates involve doing global resets (9&10 footswitch reboot) which also clears out the IRs I have found I am presented with a bit of a problem. I export all my IRs at one time in a mass export before a firmware update to a fresh directory with nothing else in it, but when I use the Helix App and return to that directory to import them, they are stored in alphabetical order in the save directory in Windows. This means that when you go to do a mass import to reload them into the Helix after a global reset they appear by default in the import window in alphabetical order. This probably is not the order the IRs were loaded on your Helix. If you import them this way (alphabetical order) they will probably no longer correspond to the IRs you set up in your presets. This means your custom presets come up with the wrong IR loaded. The way to deal with this is when you open the IR import browse window in the Helix App, sort the IRs on date. Then select them all. This will allow you to import them all at one time in the same order you exported them (even though Windows may not display the time in milliseconds in the browse window, each successive IR saved in a mass export actually has a slightly later timestamp and Windows can sort on it). Perhaps other folks have a better solution but this one is working well for me. It would be great to have an "Export Setlist" in the IR section of the Helix App so this workaround wasn't necessary. However this method seems to work pretty well when you are dealing with a lot of IRs and don't want to have to re-import them one by one, and you also want them to go back into the same IR "slot"/position on the Helix that you exported from. Note: If the Helix app import browse window is not showing "Date" as one of the columns (this is the column you need to sort on), you can do the following. Right click on the directory with your IRs, choose "Properties", select the "Customize" tab, and then select "Documents" in the "Optimize this folder for" pulldown menu. This is the process for Windows 10, it should be similar in earlier Windows versions or even on the Mac.
  16. parabolic606

    Reset to factory settings doesn't work

    Hi, I tried to reset my POD HD 500X to it's default factory setting by reinstalling flash memory using Line 6 Monkey (as recommended in the guide). But to no effect, all my input/footswitch settings stays exactly the same as previously. Beside reseting preset banks it seems like it had no effect on the settings of POD at all. I specifically would like to reset Global EQ settings but also few others. I'm using latest drivers for USB etc http://i.imgur.com/tJWODXE.png
  17. Purchased a Spider IV 150 2x12 and when it arrived and I plugged it in the amp won't boot. The led screen flashes from dim to bright every few seconds and the main effects knob's lights all stay lit. The amp will make no sound. I have tried the factory rest, but I can't even get to reset. It hit a rest screen one time, and I still don't know how I did it, but the thing hung up at 3% for about two hours and nothing ever happened. Does anyone have any ideas? Thanks in advance for any help any of you can provide. James H.
  18. We've found that tones created while using the original 1.01 firmware can sometimes be corrupted, regardless if they are new or downloaded tones. This results in the device locking up, with a factory reset being needed for recovery (press and hold the Master Volume knob and the TAP button as you power up the unit). Firmwares at version 1.10 or later resolves this issue. Tones created in version 1.10 or later can no longer be corrupted like they would have under version 1.01. However, corrupted tones created in version 1.01 are still problematic when used in Firehawks updated to later firmware versions. We encourage those encountering this issue to update to the latest firmware via the Line 6 Updater software, then perform a factory reset. Please note that any tones not backed up to My Tones prior to a reset will be lost (corrupted tones cannot be uploaded because they crash the unit and thus can't be selected for uploading).
  19. kallencx

    Line 6 M9 factory reset issue

    I am attempting to reset the factory settings on my M9 unit. I am successful at getting the tap and the model select knob held down in the right sequence to get the "Reset to factory? Are you sure?" message. I then press the model select knob once more (as described in the manual) to proceed with the reset. However, I noticed that nothing changed after completing the rest. All of the settings where still where I had set them. I even played around with various settings a few times in between resets. Still came back with what I had set instead of what should have been different/original factory rests. My firmware version 2.04. Anyone had this happen before or know how to make the reset truly stick?
  20. All 4 tone lights (or ABCD lights on the FX100) flashing is “recovery mode”. It is the intended behavior after a failed update. If you come across this mode, you must attempt to update the AMPLIFi again. Power down your AMPLIFi. When updating via PC, please connect the USB cable and make sure to boot the unit while holding Tone+Tap (amp, TT) or A+C (FX100) to put your AMPLIFi into Update Mode. Run the Line 6 Updater program found at www.Line6.com/software. For a guide, please refer to http://line6.com/support/page/kb/_/amplifi-products/ampl/how-to-update-amplifi-with-a-pc-r701. If you still get failed updates from the Line 6 Updater, try another USB cable and port as well as another computer When updating via an iOS device, Bluetooth works in recovery mode, but the pairing from before the failed update is not maintained. You must press the Bluetooth button and pair again from the smart device’s Bluetooth menu. You can then proceed with the update.
  21. Hi All, I got a problem with my X3 Live (MIDI settings) and Reaper. I use my POD for playing live along with backing tracks set in Reaper. I have created track for sending MIDI to POD and it works great BUT..... when I stop my DAW, my POD changes settings by itself (tap tempo is much faster, lower reverb mix). Is there any option to program MIDI to retain same settings while playing and while stopping? Please help. Thanks!
  22. Hello everybody, I've just played in a concert with a POD XT connected to a MKV Shortboard that I always use at home without any problem. I am not shure if the problem comes with hight volume or vivration on the stage, but the pod simply and sudenly restart itself while playing when it wants!!!!!! It doesn't care if I am on a silence or on the midle of a Solo. At first, I thought that It was an energy problem, but I start using a voltage stabilizer and the problem was not solved. Anyone had this problem??? Thank you !!!
  23. I turned on my POD HD and it said "Update flash" so I downloaded Line 6 Monkey and Reinstalled Flash Memory to the latest update. (It even said that the update was succesful) But when I turned in off and back on again it still said "Update flash". I also tried the whole "press the left arrow when turning on the POD" but that didn't change anything. could anyone please help me?
  24. IMPORTANT!!! Two steps are required for completing the FX100 firmware update process: reset the unit, then calibrate the pedal. Your FX100 may not function correctly after an update until these steps shown below are completed. Deutsche Version La version française Note: Factory Reset replaces all presets on the device, including your custom presets, with the factory presets. Turn off AMPLIFi FX100 While pressing and holding both the big knob and TAP footswitch, switch the power on The process has completed when you see 01 in the bank display and the A footswitch is lit. Step 2: Calibrate the Wah/Volume Pedal NOTE: This step is mandatory to complete the update process! Turn off AMPLIFi FX100. While pressing and holding footswitch A, switch the power on. The display reads “00†and footswitch D LED is lit. Press footswitch D. The display reads “01â€. Move the wah/volume pedal to the toe position and press to engage the toe switch. The display reads “02†and footswitch D LED is lit. Move the wah/volume pedal all the way to the Heel position and press footswitch D. The display reads “03â€. Move the wah/volume pedal to the toe position without clicking the toe switch. Press footswitch D. The displays reads “04â€. Move the wah/volume pedal and note the values in the display. Values should scroll from 0 (heel down) to 99 (toe down). Press footswitch D to save the calibration values. The display reads “05â€. Restart AMPLIFi FX100. Step 3: Pair your iOS device Repair your iOS device with FX100 Exit AMPLIFi Remote then relaunch the app You are done! Folgen Sie diesen Anweisungen nachdem Sie Ihr AMPLIFi FX100 auf Version 1.1 aktualisiert haben. Schritt 1: Zurücksetzen des Gerätes auf Werkseinstellungen: Achtung, das folgende Zurücksetzen des Gerätes ersetzt alle Presets auf dem Gerät mit den standard Presets. Inklusive Ihrer eigenen Presets. Schalten Sie das AMPLIFi FX100 ab. Während Sie den großen Lautstärke Regler sowie den TAP Fußschalter gedrückt halten, starten Sie das Gerät ein. Wenn Sie eine 01 auf dem Bildschirm angezeigt bekommen und Fußschalter A leuchtet ist der Vorgang abgeschlossen. Schritt 2: Kalibrierung des Pedals: Schalten Sie das AMPLIFi FX100 ab. Während Sie den Fußschalter A gedrückt halten, schalten Sie das Gerät ein. Auf dem Bildschirm wird nun 00 angezeigt und Fußschalter D leuchtet. [*]Drücken Sie den Fußschalter D. Auf dem Bildschirm wird jetzt 01 angezeigt. [*]Beweguen Sie das Pedal in die Zehstellung und drücken Sie. Auf dem Bildschirm wird nun 02 angezeigt und Fußschalter D leuchtet. [*]Beweguen Sie das Pedal in die Fersenstellung und drücken Sie Fußschalter D. Auf dem Bildschirm wird nun 03 angezeigt. [*]Bewegen Sie das Pedal nun in die Zehstellung aber ohne zu drücken. [*]Drücken Sie Fußschalter D. Auf dem Bildschirm wird nun 04 angezeigt. [*]Bewegen Sie das Pedal und achten Sie auf den Wert auf dem Bildschirm. Der Wert sollte sich zwischen 0 (Fersenstellung) bis zu 99 (Zehenstellung) bewegen. [*]Drücken Sie Fußschalter D um die Kalibrierung abzuspeichern. Auf dem Bildschirm wird nun 05 angezeigt. [*]Starten Sie das AMPLIFi FX100 neu. [*]Koppeln Sie die Geräte neu. [*]Schließen Sie die AMPLIFi Remote App, starten Sie diese dann neu. Suivez ces instructions après vous avez faites une mise à jour du firmware AMPLIFi FX100 jusqu’à la version 1.1. 1 : Réinitialisez l’AMPLIFi FX100 Attention, la réinitialisation remplace tous les presets, inclus sont vos propre presets avec les presets par défaut. Éteignez l’AMPLIFi FX100. Tout en maintenant le bouton du volume principal et le commutateur TAP, allumez L’AMPLIFi. Le processus est terminé quand vous voyez 01 dans l'affichage de la banque et le commutateur au pied A est allumé. 2 : Calibrez la pédale de volume/wah Éteignez l’AMPLIFi FX100. Tout en maintenant le commutateur au pied, allumez l’appareil. [*]Poussez le commutateur au pied D. Vous pouvez lire « 01 ». [*]Déplacez la pédale à la position des orteils et poussez-la. Vous pouvez voir « 02 » sur l’écran et le LED du commutateur au pied D est allumé. [*]Déplacez la pédale à la position de talon et poussez le commutateur au pied D. Vous pouvez lire « 03 ». [*]Déplacez la pédale à la position des orteils mais sans cliquer. [*]Poussez le commutateur au pied D. Vous pouvez lire « 04 ». [*]Bougez la pédale, les nombres sur l’écran changent. De 0 (talon) à 99 (orteils). [*]Poussez le commutatuer au pied D pour enregistrer la calibration. Vous pouvez lire « 05 ». [*]Redémarrez l’AMPLIFi FX100. [*]Recloupez votre appareil iOS avec le FX100. [*]Quittez AMPLIFi Remote et redémarrez l’application. C’est tous ! Vous pouvez voir « 00 » sur l’écran et le LED du commutateur au pied D est allumé.
  25. Deutsch Français Q: How can I factory reset the AMPLIFi FX100 to its default settings? A: To perform a factory reset and restore the AMPLIFi FX100 to factory settings press and hold the Master Volume knob and the TAP switch as you power up the unit. AMPLIFi FX100 Pedal Calibration Hold down footswitch A while powering on the unit At startup the display will show "00" and footswitch D LED will be lit Press footswitch D to begin The display will change to "01" and footswitch D LED will turn off Click the pedal foot switch The display will change to "02" and footswitch D LED will be lit Move the pedal to the heel position Press footswitch D The display will change to "03" and footswitch D LED will be lit Move the pedal to the toe position (DO NOT CLICK THE SWITCH) Press footswitch D Move the foot pedal and watch the values change on the display Values will scroll from a min of 0 to a max of 99 Press the footswitch D to save the calibration values The display will change to "05" Power cycle the AMPLIFi FX100 AMPLIFi FX100 Users Manual Comment puis-je réinitialiser l’AMPLIFi FX100? Maintenez enfoncé les boutons Master Switch et TAP lors du démarrage de l’AMPLIFi. AMPLIFi FX100 : La calibration de la pédale : Maintenez enfoncé le commutateur au pied A pendant le démarrage. Sur l’écran vous pouvez voir « 00 » après le démarrage et le commutateur D est allumé. Poussez le commutateur au pied D. L’écran change, vous pouvez voir « 01 » et le commutateur D s’éteint. Poussez le bouton de la pédale. L’écran change à « 02 » et D s’allume. Mettez la pédale on position talon. Poussez le commutateur au pied D. L’écran change à « 03 » et D est allumé. Mettez la pédale en position orteil (MAIS N’APPUYEZ PAS LE BOUTON) Appuyez le commutateur au pied D et l’écran change à « 04 ». Bougez la pédale et observez le nombre qui change sur l’écran. De 0 à 99. Appuyez le commutateur D pour enregistrer la calibration. L’écran change le numéro une dernière fois. À « 05 ». Redémarrez l’AMPLIFi FX100. Mode d’emploi AMPLIFi FX100 Wie kann ich mein AMPLIFI FX100 auf Werkseinstellungen zurücksetzen? Halten Sie dazu die Master Volume und TAP Knöpfe während des Startens des Gerätes gedrückt. AMPLIFi FX100 Pedalkalibrierung: Halten Sie Fußschalter A gedrückt während Sie das Gerät einschalten. Wenn es gestartet ist sollte Ihnen „00“ auf dem Bildschirm angezeigt werden und Fußschalter D sollte leuchten. Drücken Sie den Fußschalter D. Der Bildschirm wird nun „01“ anzeigen und Fußschalter nicht mehr leuchten. Drücken Sie den Pedalknopf. Der Bildschirm wird dann nach „02“ schalten und der Fußschalter D wird wieder leuchten. Bewegen Sie das Pedal auf die Fersenposition. Drücken Sie de n Fußschalter D. Ihnen wird nun „03“ angezeigt und Fußschalter D leuchtet. Bewegen Sie das Pedal in die Zehenposition. (DRÜCKEN SIE ABER NICHT DEN KNOPF) Drücken Sie dann Fußschalter D und der Bildschirm wird auf „04“ umschalten. Bewegen Sie dann das Pedal hin und her um die Veränderung des Wertes auf dem Bildschirm zu beobachten. Diese Werte werden sich im Bereich von 0 bis 99 bewegen. Drücken Sie Fußschalter D um die Kalibrierung abzuspeichern. Der Bildschirm schaltet nun auf „05“ um. Starten Sie das Gerät jetzt neu. AMPLIFi Benutzerhandbuch
×