Search the Community
Showing results for tags 'same'.
Found 4 results
-
I just got a beatBuddy drum pedal. I want to record song ideas into the Spider Jam so I plug the drum pedal in MP3/CD 1/8 inch jack, the guitar into the guitar jack and when I record (with input set to guitar) I just get just the guitar. If I plug the beat buddy into the 1/4 inch AUX and set the input yo AUX/MIC I get clean drums and no guitar. If I hold down the input button for 2 seconds and select "mix with guitar" then I get drums and guitar recorded but the drums share the overdrive tone used for the guitar and gets all distorted (this is not input level distortion, it's from the tone/dist effect). Am I missing a way to record a clean beat buddy pedal and the distorted guitar sound on the Spider Jam? The routing seems odd. Think of it as playing your own backing track into the spider via the MP3 input and playing along, BUT you want to record it to the Spider JAM's internal recording. Can't seem to do it without mono-ising it as a WAV and moving it to the SD card.. -
Hello everyone. It has long had a multi-effect rack that commanded by a midi footswitch. This footswitch had the ability to select a preset with a switch, and if I could drive again move to the previous preset. This way, I could switch two preset with the same switch. Is this possible with the POD HD 500? Thank you very much from now. Sorry for my English.
-
Was wondering if you can use 2 interfaces on the same computer ( but not at the same time) I'm thinking of buying the POD HD Desktop, but it doesnt have the 2 inputs like my UX-1 has for my Keyboards So even if I add the POD HD and disconnect it I want to be able to connect the UX-1 and add keys in my recordings. Any advice would be appreciated. Thanks, Rob
-
Using POD Farm 1 and POD Farm 2.51 on the same Computer
Line6Tony posted a article in POD Farm 1/2.0/2.5
Installing POD Farm 1 after installing POD Farm 2 can corrupt the POD Farm system files. This will cause all versions of POD Farm 1 and 2 not function correctly. The workaround is to uninstall both versions of POD Farm 1 and 2, and then install POD Farm 1 first then POD Farm 2 afterwards.
