Search the Community

Possibly a bug or possibly something I'm not doing right: I'm trying to use path 1 for a guitar using the Guitar Input, and trying to use path 2 for a bass guitar using the Aux Input (found on the back) When I set this up, so that Path 1 uses "Guitar" as the input, and Path 2 uses "Aux" (neither are using the Multi-Input), signal from the front Guitar port is always sent to Path 1 AND Path 2, when I would expect it to be sent to Path 1 only. If I use the return jacks I can get it to work, but then I'm losing one of the return slots. Is this a confirmed bug? Ta very much, redev

Hi all - Sorry if this has been covered and I just can't find it. Here's what I want to do: I play violin and guitar with two different bands. In both cases, I'd like to use the HX FX as my main FX processor for both instruments - in one case, running a violin through it (and out to a DI) and an electric guitar in (and out to my amp). I'd do the same for my other band, except instead of running out to an amp I'd use an acoustic guitar which I'd send to a DI as well. I should mention that I don't ever need to be able to play both at once - meaning, ideally, when I'm using one instrument the other will be muted. So my question is: What's the best way to do this? Can I plug two different instruments into the two main inputs and just route each one through its own set of FX, then out one side or the other of the main outs? Can I set the violin to only come out output L, with the guitar only coming out of output R (Basically "in L, out L" and "in R, out R")? Or do I need to stick an A/B pedal before the HX FX to switch between two instruments and have them both run through the mono main input (L)? I guess I'm just not 100% clear on the routing options just based on reading the manual. Another option I thought of was to stick a Send block into a violin-specific preset bank and run out of a Send output to a violin DI with nothing passing through to the main output (which would go to my amp). I'm just not totally sure how the output of Sends compares to the main outputs - is there a downside to doing it this way that I'm not seeing (besides having to use up one of my blocks for the Send)? If anyone has suggestions as to the smartest way for me to set this up, I'm all ears. One more thing - I need both instruments to be running through the tuner, so I'm guessing I can't just run the violin through a return or something. Thanks in advance!