Jump to content
Sign in to follow this  
joepetrucci85

HD500X and M13

Recommended Posts

Hi, I just want to know if there's a difference in quality of the effects between the M13 and HD500X? I'm guessing they're exactly the same?

Share this post


Link to post
Share on other sites

Thanks. I do have an HD500X and I'm building a pedalboard for live use because I still want to use most of my analog overdrives. I guess I'll just stick the HD500X in there instead of getting an M13.

Share this post


Link to post
Share on other sites

I added an M13 to my HD500; makes for some interesting additional "tap dance" tone options.

 

In particular, I place the M13 in the FX loop of the HD500 near or at the end of the signal chain, and mostly use the M13 for reverbs and delays.

Frees up some extra "pre" amp model FX, and leaves DSP open, in terms of using the particle verb on the M13, stereo delay, etc.

 

With the M13, it's up to four FX on at once - however, they are basically in columns of three buttons per column, and there in no restriction on the type of effect, or how you organize them - essentially a large configurable pedalboard. So, it makes for some interesting usage in that regard, a sort of extension of the tone already available in the HD500.

 

Can be very useful if you want to run direct, in stereo to the mixer / PA / recording. Also useful if you want to use two full amp models in the HD500 (uses lots of DSP that way).

 

If I am using it with the DT25, I just run the M13 in mono in the FX loop. If I am going direct, I run it in stereo.

 

Hd500 fx send -> M13 input(s) -> M13 output(s) -> HD500 fx return.

 

Also give you the freedom to move the fx loop block around, depending on how you want to use the M13.

Maybe you prefer fewer reverbs and delays, so use those in the HD500, put the FX loop block near or at the front of the HD500 signal chain,

and use the M13 for lots of "on deck" drives, comps, phasers, etc.

 

Sometimes I don't like to program the patches to perfection, rather to decide in the moment which FX I want on or off, or in which combination.

Lots of versatilty there! The M13 can save the "scenes" of FX groupings, so it's easy to switch from a series of "pre" FX to a grouping of "post" FX.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...