aaronpro Posted October 27, 2014 Share Posted October 27, 2014 The pedal is not working. Latest updated done on 10/25/14. Problem started occurring before update, now not at all. Quote Link to comment Share on other sites More sharing options...
fflbrgst Posted October 27, 2014 Share Posted October 27, 2014 Can you be more specific - what was happening before, now nothing works? Does Spider Monkey detect the Shortboad when you hook it up to the computer with USB? Its possible your CAT5 cable (connection to the amp) is bad? Quote Link to comment Share on other sites More sharing options...
aaronpro Posted October 27, 2014 Author Share Posted October 27, 2014 Thx for the response... Yes monkey detects it. As I use the pedal it doesn't adjust the volume while pressing and releasing.. The wah will engage and sound changes to wah effect but at the same time the pedal will not adjust pitch while in wah mode. Yes I was thinking about the cat5. Quote Link to comment Share on other sites More sharing options...
fflbrgst Posted October 28, 2014 Share Posted October 28, 2014 You can't use the pedal for both WAH and pitch control at the same time. Quote Link to comment Share on other sites More sharing options...
aaronpro Posted October 29, 2014 Author Share Posted October 29, 2014 Basically the problem is the pedal doesn't control the volume. I can press and engage the wah the led turns from green to red, the pedal doesn't change sound or volume. All of the board is working except the pedal. Quote Link to comment Share on other sites More sharing options...
fflbrgst Posted October 30, 2014 Share Posted October 30, 2014 Ok, so the tone (not pitch) does not change in wah mode, and volume does not change in volume mode? Have you calibrated the pedal? It's possible the settings have been changed in your amp for the pedal, too - you can adjust the 'heel' level and 'toe' level in both wah and volume modes. It's also possible the CAT 5 connector or cable is at fault. Quote Link to comment Share on other sites More sharing options...
aaronpro Posted October 30, 2014 Author Share Posted October 30, 2014 I have not calibrated. Il will check it if I can find how to do it... Thx again. Quote Link to comment Share on other sites More sharing options...
fflbrgst Posted October 31, 2014 Share Posted October 31, 2014 You can see the calibration method here: http://line6.com/support/page/kb/_/effects-controllers/fbv-mki-mkii-controllers/fbvshortboardexpressfbv2-mk-i-and-ii-contr-r506 Quote Link to comment Share on other sites More sharing options...
aaronpro Posted October 31, 2014 Author Share Posted October 31, 2014 Awesome. Thx for all the help. Well done it worked. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.