Jump to content
Sign in to follow this  
ricoustic101

Strange problem with Variax 600 and POD X3

Recommended Posts

Greetings,

 

Am having a strange problem with my Variax 600 connection to my POD X3.  When I use the special cable to connect, the 600 doesn't work with the X3.  This was a problem that was "growing."  For a bit, it would cut out and if I wiggled the cable it would connect back up.  Now it doesn't connect even with a wiggle.

 

The strangeness of this comes from this:  Using the same 600 and same cable, if I connect it to my old XT LIve, it works perfectly with no problems.

 

Any ideas????

Share this post


Link to post
Share on other sites

Sounds like a bad connector.  Look closely at the pins and see if they are straight and undamaged.  (Both Variax and Pod ends)  But it's most likely the Pod end if it works on a different pod.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...