zack15439 Posted December 5, 2014 Share Posted December 5, 2014 So I was hoping I would be able to use this device to add some chorus and delay to the microphone and avoiding the clutter and cables of a separate device. Obviously with all these inputs itd be nice to be able to run some delay or chorus on vocals without having to apply it to the guitar, or backup track, vice versa. Is it possible to dedicate effects chains to individual inputs? so i can sing and play guitar with separate effects? Quote Link to comment Share on other sites More sharing options...
chuskey Posted December 5, 2014 Share Posted December 5, 2014 This is very doable. Just set input 1 guitar and input 2 to mic. As long as you don't put any mono effects before the paths split they will be separate paths. With this input setup anything in Path A will be your guitar effects and path B will only effect the mic signal. 1 Quote Link to comment Share on other sites More sharing options...
zack15439 Posted December 5, 2014 Author Share Posted December 5, 2014 thank you! Quote Link to comment Share on other sites More sharing options...
silverhead Posted December 5, 2014 Share Posted December 5, 2014 Here is a preset that gives you the basic setup. Tweak as desired in terms of FX, but keep the overall dual path structure the same. http://line6.com/customtone/tone/215659/ 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.