schrismer Posted December 18, 2014 Share Posted December 18, 2014 Hey.... Cant find anything on this so I'm going to start a thread :) I have an HD500 and the DT50 1x12 combo.... and now it has started acting funning. When they are connected via L6 Link....the screen on the HD500 "toggles" back and forth from the main screen to the "amp knob" setting! I've always used the L6 Cords... I've tried several and it still does it (I also tried just a standard Mic cord and it still did it) the HD500 work perfect any other time! Idea's?.... go..... Quote Link to comment Share on other sites More sharing options...
spaceatl Posted December 18, 2014 Share Posted December 18, 2014 try parking all of the DT knobs on channel A to zero....I have had jitter interaction between a POD and the DT on the system link when the tone stack knobs on the amp and the POD are fairly different...any knob movement (or voltage jitter) makes the screen change... For me, i generally prefer to use the DT controls to adjust the amp tone stack on the POD....So I park the knobs on the POD at zero....basically, I have found as long as I pick one device for controlling the tone stack and zero out the other, I don't have much of a problem with the jitters...It's when the tonestack knobs between the DT and POD are totally different that things can get freaky... Quote Link to comment Share on other sites More sharing options...
schrismer Posted December 18, 2014 Author Share Posted December 18, 2014 hmmm.... I've never tried that one!! I will tonight!! it has to be something crazy like that because It NEVER did it before.... but after....about 2 years... now it is popping up! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.