Jump to content
sorrelity

Trying to update my AMPLIFi Utility

Recommended Posts

I'm currently trying to update my amplfii utility software, with the latest version.

 

2.10.00 and it says it's installing or whatever but it's been an hour with 0 progress, does it take a long time to do or is their a problem?

  • Downvote 1

Share this post


Link to post
Share on other sites

It should only take a few minutes at most with the PC utility. Is there different PC you can try or an iOS 7 or 8 device? Updating via BT my take ~40 minutes.

Share this post


Link to post
Share on other sites

Settings in my iPhone? Because their is no such option. And for the amplifi utility there is only two settings 'My account' and 'help'.

Share this post


Link to post
Share on other sites

Okay so I updated and it's not showing up in my guitar rig 5. And yes I did the driver update. And update was now succesful.

Share this post


Link to post
Share on other sites

What is DAW?

And I'm using guitar rig5, and it doesn't show up in my aiso devices. Is GR5 not supported?

Share this post


Link to post
Share on other sites

there is no amplifi utility for windows...

i think you mean the line6 updater...

that is on the downloads link in top right corner.

 

hi everybody .. I have Os windows 7 and i'm trying to install AMPLIFI utility but i can't find it  

where is it? 

Share this post


Link to post
Share on other sites

There's a number of references to an AMPLIFi Utility for PC (at least) but the Line6 Updater seems to have replaced that, to a certain degree of confusion.

Share this post


Link to post
Share on other sites

Good morning, English is not my language, but I hope that you can undertstand me.

I have buy yesterday an AMPLIFI 75 and a FBV Exspress MKII and I have a Tablet Android, but I can't find "AMPLIFI UTILITY" for to update the firmware of the Amplifi. I wish to know how to do this because the Amplifi Remote on tablet don't change the setup of AMPLIFI. I hope that you can help me. Thanks . Claudiobs 

Share this post


Link to post
Share on other sites

There is no drop-down list for me to choose what to update in the updater I downloaded.

 

The updater will recognize the device that's connected to your computer. Once listed, click on it and it will display a list of update options...follow the instructions.  For my AMPLIFi 150, I had to turn it off and boot it in update mode, the update was painless.  Be sure to back-up any patches you've made first!

  • Upvote 1

Share this post


Link to post
Share on other sites

The updater will recognize the device that's connected to your computer. Once listed, click on it and it will display a list of update options...follow the instructions.  For my AMPLIFi 150, I had to turn it off and boot it in update mode, the update was painless.  Be sure to back-up any patches you've made first!

 

My Windows 10 laptop will not recognise the device (Amplifi 150) at all, I tried 2 different USB cables.

Share this post


Link to post
Share on other sites

I have downloaded the latest updater but my laptop running Windows 10 will not recognise the device (an Amplifi 150) at all; I tried 2 different USB cables, both new, in the hope that this was the problem but it made no difference. There is an error alert up against the USB port in Windows device manager, so it know something has been plugged in but that's all I get, no devices show up in the Line 6 Updater.

Anybody have any ideas?

Share this post


Link to post
Share on other sites

I would try running the driver installer first if you haven't already.

Share this post


Link to post
Share on other sites

I'm also using Windows 10; which finds my AMPLIFi FX100 and 150; I have to restart the AMPLIFi in update mode to update the firmware, and it works fine.

 

Try rebooting the computer; keep the AMPLIFi off, connect the USB cable, then power up the AMPLIFi.  Let us know what happens - or doesn't.

Share this post


Link to post
Share on other sites

Pair the iPhone to the AMPLIFi and go to Settings>>Device Flash

I have only ever updated via my iPhone. I went to go do the more recent 2.50.2 version and it fails every time I try to start it. I have closed the app, re opened it, deleted it and re installed it. I have tried factory resetting the amp and no matter what I do it fails every time I try to start it. Is there any way to fix this without having to go pick up a usb cable and update off the laptop? 

Share this post


Link to post
Share on other sites

I have downloaded the latest updater but my laptop running Windows 10 will not recognise the device (an Amplifi 150) at all; I tried 2 different USB cables, both new, in the hope that this was the problem but it made no difference. There is an error alert up against the USB port in Windows device manager, so it know something has been plugged in but that's all I get, no devices show up in the Line 6 Updater.

Anybody have any ideas?

Hi, any news in this matter? I am aking because I have the same problem.

Share this post


Link to post
Share on other sites

Hi, any news in this matter? I am aking because I have the same problem.

i have exactly the same problem and i cant update my amplifi fx 100

Share this post


Link to post
Share on other sites

I have only ever updated via my iPhone. I went to go do the more recent 2.50.2 version and it fails every time I try to start it. I have closed the app, re opened it, deleted it and re installed it. I have tried factory resetting the amp and no matter what I do it fails every time I try to start it. Is there any way to fix this without having to go pick up a usb cable and update off the laptop?

 

Same problem here, not able to update.

This is what I see, attached.

post-2306985-0-73186600-1470963816_thumb.png

post-2306985-0-95628000-1470963830_thumb.png

post-2306985-0-31722500-1470963847_thumb.png

post-2306985-0-98461600-1470963863_thumb.png

post-2306985-0-78675400-1470963878_thumb.png

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...