djrichie Posted January 22, 2015 Share Posted January 22, 2015 Hola I used the Line6 XD-V70 handheld wireless microphone in a ceremony where one guy used to officiate a marriage; everything was perfect until people (around 110 pax) stand up and the signal of the microphone got lost, like dropouts; the last words of minister was lost (and now presenting Mr and Mrs....) I had the receiver on top of a plastic case; antenas on 45°, about 1 foot high from the ground; the people got seated in a lower terrace at front of the equipment for around 6-8 feet max.... how can I fixed this? Is this have to be wiht RF1? if so, how can I change it? Thanks and cheers! Quote Link to comment Share on other sites More sharing options...
dboomer Posted January 22, 2015 Share Posted January 22, 2015 It sounds like you lost line of sight between the transmitter and the receiver. The optimum position for the antennas is about 6-8 feet above the floor. Also if the performer is holding the transmitter at the bottom and thereby covering the antenna, your range will be reduced. Instruct them to hold the transmitter from the middle up. Quote Link to comment Share on other sites More sharing options...
cisotto Posted February 24, 2015 Share Posted February 24, 2015 IN ENGLISH (thanks to Google Translate): I bought an Apple Airport Extreme latest model . The problem is that when I turn it on , the microphone line 6 XD - V75 model will stop the signal , and even the pocket of the guitar "Relay Guitar" does not work and interrupts the signal . I took the Apple Airport Extreme because it works on two frequencies 2.4 and 5.0 Ghz . I set it on the 5.0 Ghz but the problem persists . HELP! -------------------------------------------------------------------------------------------------------------------------------------- IN ITALIANO: Io ho comprato un Apple Airport Extreme ultimo modello. Il problema è che quando lo accendo, il microfono line 6 modello XD-V75 si interrompe il segnale, ed anche il pocket della chitarra "Relay Guitar" non lavora e si interrompe il segnale. Ho preso l'Apple Airport Extreme perchè lavora su due frequenze 2.4 e 5.0 Ghz. L'ho settato sui 5.0 Ghz ma il problema persiste. AIUTO! Quote Link to comment Share on other sites More sharing options...
dboomer Posted February 24, 2015 Share Posted February 24, 2015 You CANNOT shut the 2.4G section with Apple Express. Try using a Belkin N600. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.