Brynbeagle Posted February 10, 2015 Share Posted February 10, 2015 My direct volume level is way louder than when I have the hd500x running. I have master at 100%, and when a/b ing, the direct signal is still louder than the bypassed hd500x level. Any tips out there, to help me match the levels. I'm trying to run the hd500x intI the front of a 59 Bassman reissue. I've been a/b ing Normal channel 1 (hd500x) and 2 (Direct line in). Quote Link to comment Share on other sites More sharing options...
pianoguyy Posted February 10, 2015 Share Posted February 10, 2015 what about the volume of the patches you use? You can set individual volumes in each patch. 1 Quote Link to comment Share on other sites More sharing options...
pianoguyy Posted February 10, 2015 Share Posted February 10, 2015 try running your audio player through the cd input. That is not affected by the master volume or the volume of the patches. That will narrow down where the volume issue lies. Quote Link to comment Share on other sites More sharing options...
Brynbeagle Posted February 10, 2015 Author Share Posted February 10, 2015 I'm use amp pre model as my "overdrive". When I turn off the amp modeling, I would like to have the clean tone as my bassman. I usually play at 2.5-3 on the volume of the amp. With hd500x connected and bypassed, I need to crank to about 5 to get amp to a descent level. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.