DarkEdge Posted February 15, 2015 Share Posted February 15, 2015 Okay I'm trying to eliminate the "operator error" from this but I don't think my volume and wah pedals are working. I've rest the 500x by holding down the left directional button and powering "On", I go to 01A Son Of Plexi and activate Exp1 and there is zilch, nada, nothing...same tone as before with no wah. I turn "On" the Volume pedal in my editor and hit Exp2 with my toe and zilch, nada, nothing...sound volume is not affected by rolling the pedal. Am I missing something basic here or do I have a bad board?? Should also say all of the firmware updates have been added. Quote Link to comment Share on other sites More sharing options...
Elexorien Posted February 15, 2015 Share Posted February 15, 2015 Was this a result of the firmware update? I just updated my HD500 and my A channel patches are now in audible... Quote Link to comment Share on other sites More sharing options...
Tader Posted February 15, 2015 Share Posted February 15, 2015 I had thye same issue after a reset, it just needs calibrating, same thing as the reset but you hold down another key, cant remember which but this will solve it for you :) Quote Link to comment Share on other sites More sharing options...
DarkEdge Posted February 15, 2015 Author Share Posted February 15, 2015 Whew...thanks! http://line6.com/support/page/kb/_/pod/pod-hd500-hd500x/pod-hd500xhd500-pedal-calibration-r161 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.