RunninReb Posted March 26, 2015 Share Posted March 26, 2015 Greetings, I purchased a Spider IV 75 off Craigslist and for a year, it served me quite well. When I turn the amp on now, I get a loud static like hiss. The hiss is present with both volumes turned completely down and it hisses even when a guitar chord is not plugged in. I did a reset and the static went away while during the reset process. Once the reset process was complete, the hiss returned. Any guidance would be greatly appreciated. Thanks! Quote Link to comment Share on other sites More sharing options...
fflbrgst Posted March 26, 2015 Share Posted March 26, 2015 Try a pair of headphones in the rear jack - is the hiss present there, too? Does the sound of the guitar come out of the speakers, or just the noise? Quote Link to comment Share on other sites More sharing options...
Charalambos10 Posted December 30, 2019 Share Posted December 30, 2019 I have also the same problem. I used a pair of headphones in the rear jack and the buzzing / static sound continuous. what might the problem be? Quote Link to comment Share on other sites More sharing options...
psarkissian Posted December 30, 2019 Share Posted December 30, 2019 Needs to be serviced by a Line 6 authorized service center, not a self repair thing that you can do. Quote Link to comment Share on other sites More sharing options...
Slittle0 Posted March 10, 2020 Share Posted March 10, 2020 On 12/30/2019 at 6:15 AM, Charalambos10 said: I have also the same problem. I used a pair of headphones in the rear jack and the buzzing / static sound continuous. what might the problem be? Did you try factory reset? Quote Link to comment Share on other sites More sharing options...
psarkissian Posted March 10, 2020 Share Posted March 10, 2020 Factory rest won't help for that, it needs to be serviced. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.