sworkie Posted April 15, 2015 Share Posted April 15, 2015 .......cause I'm the newest noob in this community. My apologies to everyone for potentially asking a stupid question with a simple answer without first looking through every manual and old post first (I'm a little impatient). After 25 years of NOT playing music, I bit the bullet and acquired some gear and am now stumbling my way though all of this tech. I've picked up an HD500x and an L2M and some recording software. By just following directions, I've been able to configure my set up just fine....but....I can't seem to quickly find the info I need to finish. The problem....using the HD500x as the interface, I can't get the software tracks to play through my L2M. I can hear it in my headphones along with guitar, but only guitar is coming through the powered speaker. So I'm assuming there is an output setting somewhere within the 500x that will send the Cubase output to the speaker and not just the headphones. Thanks for your help. Quote Link to comment Share on other sites More sharing options...
spaceatl Posted April 15, 2015 Share Posted April 15, 2015 I am guessing that you have the L2M hooked up via the link....USB playback will not go over the link (I have a couple of DT amps that have the link)...rather, you would likely need to run the 1/4 outs out of the 500x to the RCA inputs on the L2M to get soundcard playback with you guitar... 1 Quote Link to comment Share on other sites More sharing options...
zaphodboy Posted April 15, 2015 Share Posted April 15, 2015 I am guessing that you have the L2M hooked up via the link....USB playback will not go over the link (I have a couple of DT amps that have the link)...rather, you would likely need to run the 1/4 outs out of the 500x to the RCA inputs on the L2M to get soundcard playback with you guitar... +1. It took me a while to work that one out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.