sukalyandas Posted May 8, 2015 Share Posted May 8, 2015 Hi Team, I bought a POD HD400 recently but even after installing line monkey , hd400 edit, and the drivers, etc. My pc is not able to detect the device. Pls help. Quote Link to comment Share on other sites More sharing options...
ppiluk Posted May 8, 2015 Share Posted May 8, 2015 Its not much to go on but hopefully we will get it figured out. Have you tried a different USB cable. Have you tried different USB ports on your computer. If possible, try hooking the unit up to another computer. With the information you have provided its impossible to proceed without ruling these things out first. Quote Link to comment Share on other sites More sharing options...
alienux Posted May 8, 2015 Share Posted May 8, 2015 Also, make sure you aren't using a USB hub and instead go directly into the computer. USB hubs don't play well with PODs. Quote Link to comment Share on other sites More sharing options...
sukalyandas Posted May 16, 2015 Author Share Posted May 16, 2015 Its not much to go on but hopefully we will get it figured out. Have you tried a different USB cable. Have you tried different USB ports on your computer. If possible, try hooking the unit up to another computer. With the information you have provided its impossible to proceed without ruling these things out first. I have tried all the USB ports and all available cables. What I have observed is Line6 driver v4.2.7.1 is not getting installed into the system for some reason, neither directly from line 6 monkey, nor manually from website. I have a feeling if this driver version gets installed, then it might detect the POD. Pls help Quote Link to comment Share on other sites More sharing options...
sukalyandas Posted May 16, 2015 Author Share Posted May 16, 2015 Also, make sure you aren't using a USB hub and instead go directly into the computer. USB hubs don't play well with PODs. You Are right, but I am not using any HUBs. Let me once again try to use another computer. Quote Link to comment Share on other sites More sharing options...
stevevnicks Posted May 16, 2015 Share Posted May 16, 2015 it sound like its to do with driver signing in windows 7/8 ?, I think you will find that the line 6 driver is not a signed driver so windows 7/8 may block it. you need to make sure you allow windows to install the unsigned driver. infact what O/S are you using ?? if windows ? what version? for windows 7 try reading here this may help http://en.kioskea.net/faq/3914-windows-7-how-to-install-unsigned-drivers windows 8.1 http://revryl.com/2013/08/06/install-unsigned-drivers/ Quote Link to comment Share on other sites More sharing options...
stevevnicks Posted May 16, 2015 Share Posted May 16, 2015 hmmm just a heads up, im not sure ? but after logging on the line 6 forum I got Port scanned attacked by this IP address 207.10.176.134 ... I am not 100% sure it was from this site although I would strongly advise people to add that IP address to be blocked by there firewall, it belongs to an USA ISP which I have reported to the company and http://www.abuseipdb.com/check/207.10.176.134 .... Quote Link to comment Share on other sites More sharing options...
Punkyboy Posted May 16, 2015 Share Posted May 16, 2015 try this download this http://www.majorgeeks.com/files/details/usbdeview.html NO INSTALLATION NEEDED Don't connect the pod with the USB launch usb deview and wait for loading right click and choose uninstall this driver for all what you see as POD HD 400 (in second colon DESCRIPTION) After this ,uninstall all Line 6 monkey and HD edit etc... with the usual way Take a look and delete all the maps related line 6 or Pod HD 400 (if you have other stuff of line 6) to : C:\Users\YOUR NAME\AppData\Roaming C:\Users\YOUR NAME\AppData\Local C:\ProgramData C:\Program Files C:\Program Files (x86) restart the PC NOW AT FIRST INSTALL THE HD EDIT(right click and choose install as admin) DON'T CONNECT the usb when asking , just install and finish Now Install the line 6 monkey(instal as admin) and connect the Pod when asking normally it must work now !! I hope 2 Quote Link to comment Share on other sites More sharing options...
sukalyandas Posted July 10, 2015 Author Share Posted July 10, 2015 Punkyboy, stevevnicks.. Thanks a lot guys.. It seemed to work... implemented both of your ideas. It turns out it is crucial for the windows USB installer to work while Line 6 driver installer asks to plug in the USB. Thanks a lot again.. :) So happy now.. But new problem guys (bad poker face).. all my presets seem to hv gone crazy after firmware update :'( what next? Quote Link to comment Share on other sites More sharing options...
sukalyandas Posted July 11, 2015 Author Share Posted July 11, 2015 Guys, I figured it out.. I just had to re-calibrate the Pedal..works awesome now.. Cant thank you enough for your help.. :) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.