freddie0815 Posted June 20, 2015 Share Posted June 20, 2015 Guys- I have filed the following firmware update wishes within line6.IdeaScale.com In case you are looking for these kind of improvements, too, I'll be glad, if you could vote for it . THANKS! Firehawk FX: Add Boost Functionality 'Switch on/off Solo Boost' 1. Generally Change Preset Indicator LED on Floorboard Firmware from Bright Red into now Dimmed Red 2. Assign a boost level +xx dB within the Firehawk App whilst 'Boosted', also apply Default Bost = on/off whilst Preset is being selected 3. Whilst Preset is selected tap on the already selected FX-Switch for this Patch again (twice quickly). This will both enable the Boost and change the colour of the FX switch into Bright Red 4. Switch Boost off whilst tapping again on the selected Preset FX-Switch Firehawk FX: Add Alternate Preset Mode Functionality 1. Generally Change Preset Indicator LED on Floorboard Firmware from Bright Red into now Dimmed Red 2. Assign an alternate / modified Preset with some FX blocks defined on/off as customized in the Firehawk App 3. Whilst Preset is selected tap (hold for 2 seconds) on the already selected FX-Switch for this Patch again. This will both enable the Alternate Preset Mode (hold for 2 seconds again) and change the colour of the FX switch into Bright Yellow (OR start flashing) 4. Switch Alternate Preset Mode off whilst tapping again on the selected Preset FX-Switch Firehawk FX: Add Smart Preset-Change Mode Functionality 1. Default Preset Change mode is 'Hard Change-over' (as it works today) 2. Assign an alternate Smart Preset Change mode in the Firehawk App,. This generally applies to the Floorboard functionality. Within the Smart Preset Change Over Mode, the user should be able to define a fade-out time of the previously selected preset, once a new preset had already been selected. This will help to have a smoother switch from one preset to the next, i.e. delays of the former preset used will not be just hard cut-off... 3. Whilst Alternate Preset Change mode is selected the Bank-up and Bank-down FX-switch LED's (if there are any..) will turn into dimmed grey (from being off in the default setting) Firehawk FX: Global Looper Mode Functionality 1 Quote Link to comment Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.