Joepeggio 71 Posted March 19, 2017 Good call!!! If i reference the way Boss does it, 100% is what is in the patch. 0 is reverb off. Essentially -100%. And 200% is like doubling. Thanks for commenting, i hope it adds clarity to what i was thinking. Share this post Link to post Share on other sites
phil_m 4,170 Posted March 20, 2017 Friendly bump. Still would like this. Global reverb level. https://line6.ideascale.com/a/dtd/Global-Reverb-Percentage-amount/799771-23508 It seems to me that the big difference between a device like the Helix and the Boss GT5 in regards to this sort of thing is that the Boss has a dedicated slot for reverb, so tying to a global control would be pretty easy to program. With the Helix, you can multiple reverbs per preset, and they can be in any position on any path... So it just seems like it would be tricky to sort through all of that. Would probably more doable to have something like a global reverb block that could persist through preset changes. 1 Share this post Link to post Share on other sites
Joepeggio 71 Posted March 20, 2017 Just hoping. It was useful but the Helix is way way way better in every way. Share this post Link to post Share on other sites
hideout 173 Posted March 20, 2017 I still think it would be a handy feature. Fido83, all this is reminding me of how much of a pain in the keester the GT-5 was to tweak. lol 😂 Share this post Link to post Share on other sites
MusicLaw 178 Posted March 20, 2017 The idea of a Globally acting Reverb Bias adjustment could be very handy. It would be up to the Line 6 software engineering team to determine how best to implement the feature. Perhaps a new Global Reverb Bias Parameter (Dual state; On or Off) could be added to every Reverb Block. This could be set to "On" by the User should they wish that Reverb Block to be affected by whatever value the Global Reverb Bias control may be set for. Voted up the IdeaScale submission and posted the above as a Comment. Share this post Link to post Share on other sites
HudsonHawk 9 Posted March 22, 2017 I wish the main large screen could just display a large image of the preset name when using live. The routing does not need to be on screen live and a large preset name would be great! 3 Share this post Link to post Share on other sites
MusicLaw 178 Posted March 22, 2017 I wish the main large screen could just display a large image of the preset name when using live. The routing does not need to be on screen live and a large preset name would be great!HudsonHawk, put this on IdeaScale to be sure it gets on Line6's radar, and is also seen by more users! After you do, copy the link to your IdeaScale submission and post it here in this thread. 1 Share this post Link to post Share on other sites
dannepop 7 Posted March 25, 2017 Can´t login to my Ideascale account and their recover password don´t work! Can someone tell them that their recover password don´t work. Or give me an email address that I can reach them with! Thanks Dan/ Share this post Link to post Share on other sites
HonestOpinion 733 Posted March 25, 2017 Can´t login to my Ideascale account and their recover password don´t work! Can someone tell them that their recover password don´t work. Or give me an email address that I can reach them with! Thanks Dan/ Not sure if this is exactly what you were looking for but you can contact them directly via a support ticket or phone here: http://line6.com/support/tickets/ Share this post Link to post Share on other sites
jasontc3416 0 Posted March 30, 2017 I have a Hughes and Kettner Grandmeister, and I would love to see some Hughes and Kettner model amps on the Helix. Maybe some Coreblade, Triamp, Tubemeister And Yes Some Grandmeister!!! Share this post Link to post Share on other sites
EdwinV 24 Posted April 3, 2017 Just created a new submission: https://line6.ideascale.com/a/dtd/Fuzz-face-with-selectable-transistors/890798-23508?submitted=1 I would really like to have a fuzz face model that has selectable transistors. Several Germanium and Silicon versions would be awesome. If you agree, please upvote! Thanks Share this post Link to post Share on other sites
biigm 1 Posted April 5, 2017 I made a submission. I'm a bass player, and living without my Boss OC2 is nearly impossible. Especially when playing with Paul Young. Could you help me get it. https://line6.ideascale.com/a/dtd/Boss-OC2-Octaver-PLEEEEASE/890993-23508 1 Share this post Link to post Share on other sites
phil_m 4,170 Posted April 5, 2017 I made a submission. I'm a bass player, and living without my Boss OC2 is nearly impossible. Especially when playing with Paul Young. Could you help me get it. https://line6.ideascale.com/a/dtd/Boss-OC2-Octaver-PLEEEEASE/890993-23508 What does the Boss OC-2 do that you can't do with the current pitch effects on the Helix? 1 Share this post Link to post Share on other sites
biigm 1 Posted April 5, 2017 well it's tough to describe. It's not a matter functionality since the OC2 is obviously simple. But the tone you get seems "weightier" + "juicier" for the lack of a better term. Off course it has something to do with how the octave is voiced, and I dont see any way of changing that in the Helix. If you know the OC2 on bass and knows how to make the Helix sound like that, I would appreciate your suggestions. Even better, make a model that gets the tone. I'm sure you can :-) Share this post Link to post Share on other sites
matsansan 1 Posted April 8, 2017 Bring back Variax Bass sounds using Helix https://line6.ideascale.com/a/dtd/Bring-back-Variax-Bass-sounds-using-Helix/891339-23508 Myself I am a happy owner of a Variax 705 bass. Sounds fantastic, and gives me great flexibility. But since it is highly unlikely that we will see another Variax Bass, my idea is to use Helix to resurrect the Variax Bass sounds back from the dead :-) Share this post Link to post Share on other sites
HonestOpinion 733 Posted April 8, 2017 Enhance snapshot mode switching functionality https://line6.ideasc...es/891389-23508 Share this post Link to post Share on other sites
hideout 173 Posted April 9, 2017 Enhance snapshot mode switching functionality https://line6.ideasc...es/891389-23508 Upvoted Share this post Link to post Share on other sites
hideout 173 Posted April 9, 2017 Here's my latest idea. https://line6.ideascale.com/a/dtd/Dynamics-Controlled-Crossfade/891439-23508?submitted=1 Share this post Link to post Share on other sites
HonestOpinion 733 Posted April 9, 2017 Here's my latest idea. https://line6.ideascale.com/a/dtd/Dynamics-Controlled-Crossfade/891439-23508?submitted=1 Cool idea, voted! Share this post Link to post Share on other sites
MusicLaw 178 Posted April 9, 2017 Cool ideas! Voted for both. Let's see how the userbase responds and whether Line 6 embraces the suggestions. Share this post Link to post Share on other sites
hideout 173 Posted April 10, 2017 Cool ideas! Voted for both. Let's see how the userbase responds and whether Line 6 embraces the suggestions. Cool idea, voted! Thanks guys! Share this post Link to post Share on other sites
ApoDoc 0 Posted April 11, 2017 I would like to simply have an Metronome build in/Software! Thats it. For learning licks, everytime in the right time....And maybe with funktions like : Play 5 % faster after 3 minutes practising. That would be awesome! Share this post Link to post Share on other sites
vartanian67 1 Posted April 13, 2017 Lexicon reverbs plz 1 Share this post Link to post Share on other sites
Mcsqunk 0 Posted April 13, 2017 Hi, new to the forum. I have an M13 and seriously considering upgrade to a helix. Only issue for me is the lack of synth/filter models. I use the obi wah and filters a lot on M13 and it looks like they aren't included on the helix. Is there any possibility they will be added in a future update? Thanks Share this post Link to post Share on other sites
HonestOpinion 733 Posted April 15, 2017 Add additional slots for IRs Vote it up here: https://line6.ideascale.com/a/dtd/Add-additional-slots-for-IRs/892101-23508 1 Share this post Link to post Share on other sites
HonestOpinion 733 Posted April 16, 2017 Add additional slots for IRs Vote it up here: https://line6.ideascale.com/a/dtd/Add-additional-slots-for-IRs/892101-23508 Added the following to the description for this Idea in response to a question in the comments from DI: "...a very flexible solution would be adding the ability to designate any of the Helix's eight setlists as either a "Setlist" or an "IR list"." Share this post Link to post Share on other sites
daddydoodles 10 Posted April 18, 2017 How about a global export function for IRs? Share this post Link to post Share on other sites
HonestOpinion 733 Posted April 18, 2017 How about a global export function for IRs? It may not be exactly what you had in mind but you can export all of the IRs at once by highlighting them all and hitting the 'Export' link in the Editor under the IR tab. Share this post Link to post Share on other sites
di0sys 2 Posted April 19, 2017 How about an option to automatically disable all cabs and IR's on the quarter inch outs but keep them on the XLR outs? 2 Share this post Link to post Share on other sites
metalgeek71 0 Posted April 20, 2017 New Feature Suggestion: Monitor In Global Setting I currently use in-ear monitors via the headphone out jack. To do this I have to use 1/4 of the available paths to set up a dummy signal from the mic input. It would be nice to have a setting that would eliminate the need to do this. Maybe add "Mic In" to the Headphones Monitor. The next level would be full monitoring with a mixer for external monitor signal, guitar, and vocals. This way, if there are not enough monitor mixes, one could take a general mix from the monitor in then mix in guitar and vocal. Share this post Link to post Share on other sites
BuleriaChk 2 Posted May 4, 2017 Add Performance/Snapshot Mode to Editor (with option to organize setlists in banks) I'm running the editor from a touchscreen laptop with the Helix LT some distance away, and I would really like a Performance mode (with a keyboard shortcut) to switch presets, either live from the laptop to adjust parameters remotely (via USB) or on the laptop where the remote is under the desk to save space in my apt. I'm sure this will be a feature in Native, but we need it in the Editor as well... Share this post Link to post Share on other sites
arislaf 846 Posted May 5, 2017 An update for vocals https://line6.ideascale.com/a/dtd/Update-for-vocals/895141-23508?submitted=1 An update for filters https://line6.ideascale.com/a/dtd/An-update-for-filters/895143-23508?submitted=1 Add the bassman on bass amps too https://line6.ideascale.com/a/dtd/Add-bassman-on-bass-amps-too/895144-23508?submitted=1 Add a marshall super bass, and please add it on both guitar and bass amps. https://line6.ideascale.com/a/dtd/Super-bass-marshall/895145-23508 Presets for bass players https://line6.ideascale.com/a/dtd/Some-presets-for-bass-players/895146-23508?submitted=1 Share this post Link to post Share on other sites
PeterHamm 602 Posted May 5, 2017 Add the bassman on bass amps too https://line6.ideascale.com/a/dtd/Add-bassman-on-bass-amps-too/895144-23508?submitted=1 Try the current bassman amp with a true bass cabinet. Thank me later. 1 Share this post Link to post Share on other sites
arislaf 846 Posted May 5, 2017 Tr Try the current bassman amp with a true bass cabinet.Thank me later. Tried it already and loved it!! I don't want a new bassman, just the current bassman to be available on bass amps also ;) Share this post Link to post Share on other sites
PeterHamm 602 Posted May 5, 2017 Tr Tried it already and loved it!! I don't want a new bassman, just the current bassman to be available on bass amps also ;) Well, since you can dial it up anytime you want, why would they need to do this? I don't understand. So you go to guitar amps to get it... big deal... Share this post Link to post Share on other sites
MGblade 65 Posted May 6, 2017 https://line6.ideascale.com/a/dtd/Expand-mic-placement-and-ad-off-axis-option/895188-23508 Share this post Link to post Share on other sites
MGblade 65 Posted May 6, 2017 Expansion of the mic placement options. On /off axis + cone to dust cap placement. Would be awesome. 1 Share this post Link to post Share on other sites
HonestOpinion 733 Posted May 6, 2017 Expansion of the mic placement options. On /off axis + cone to dust cap placement. Would be awesome. ^^^^^ Yes indeed, it would be awesome! Would love to see this get added. Share this post Link to post Share on other sites
djd100 1 Posted May 12, 2017 Please add stand alone tube power amp sims for us tube preamp users! 6L6, EL34, EL84, KT88, and 6V6, both push-pull and single-ended, with Depth and Presence controls, thanks! 1 Share this post Link to post Share on other sites
spikey 606 Posted May 12, 2017 Power amp tube changes and a graphic mic placement GUI (like Wall of Sound has) would be awesome. Oh yes, and a tuner for the editor.... Share this post Link to post Share on other sites
