CACHERA Posted July 1, 2015 Share Posted July 1, 2015 Hi I bought them an install into my PodHD500. Last night, without the pod, i try to see via the PodHD Edit software the amps in the packs but see nothing. I need to plug the pod to see the new amps ? Because the "originals" amps are seen in the software. Thank you for answer. Philippe Quote Link to comment Share on other sites More sharing options...
Ed_Saxman Posted July 1, 2015 Share Posted July 1, 2015 Yep, you need to plug the Pod to see the new amps. However, if you turn off the POD after being connected, the HDEdit continues to show the amps pack while the program is still open. Quote Link to comment Share on other sites More sharing options...
Punkyboy Posted July 1, 2015 Share Posted July 1, 2015 yes you need to plug the pod and launch line 6 monkey to update just besure to have the last version of monkey To check go in the setup of the pod ( hold view) and go to the last "page" with de joystick (press right) normaly at the end you can see of the packs are installed or not . Quote Link to comment Share on other sites More sharing options...
CACHERA Posted July 1, 2015 Author Share Posted July 1, 2015 Yep, you need to plug the Pod to see the new amps. However, if you turn off the POD after being connected, the HDEdit continues to show the amps pack while the program is still open. OK thank youEven turn off the pod must be connected, that is correct? Quote Link to comment Share on other sites More sharing options...
CACHERA Posted July 1, 2015 Author Share Posted July 1, 2015 yes you need to plug the pod and launch line 6 monkey to update just besure to have the last version of monkey To check go in the setup of the pod ( hold view) and go to the last "page" with de joystick (press right) normaly at the end you can see of the packs are installed or not . Yes I did that.Thank you Quote Link to comment Share on other sites More sharing options...
Ed_Saxman Posted July 1, 2015 Share Posted July 1, 2015 Even turn off the pod must be connected, that is correct? Ooops! I´ve just checked it now to answer you and I realized I was partially mistaken. As soon you turn off or disconnect the POD, all the names of the amp packs dissapear from the list, but both the icon and the parameters still works in all the presets already loaded where a amp from the new packs were saved. So: if you sync your POD to the HDEdit, then turn off/disconnect the POD, the HDEdit will continue showing the amps packs (except names) in the saved presets, but you´ll be unable to create a new preset with those amps (unless you duplicate a existing one). Not a big issue after all, so you can use it almost normally. Just make a basic preset for each amp. The only drawback is not to be able to choose any cab coming from the packs. Quote Link to comment Share on other sites More sharing options...
CACHERA Posted July 1, 2015 Author Share Posted July 1, 2015 Ok perfect. Thank you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.