malnack Posted July 8, 2015 Share Posted July 8, 2015 When I was using my HD500 the other day, it no longer showed the new amps from the amp pack. I launched Line6 Monkey and it said that my HD500 was not authorized. After a bit of troubleshooting I decided to reboot my whole system (rebooting the HD500 did not correct it). When my PC was rebooted, the new amps were available again:) At the time I encountered the issue, I had the HD500 on one USB port, my AudioBox 1818 VSL connected to another. I was using HD Edit while I was recording tracks in Studio One v3. At some point I disconnected the HD500 and plugged in my Axiom keyboard controller to add a keyboard part. It was after I was done doing that and plugged the HD500 back in that the problem appeared. So, Studio One must've held onto the USB port a bit. 1 Quote Link to comment Share on other sites More sharing options...
pianoguyy Posted July 8, 2015 Share Posted July 8, 2015 Reboot the computer. It solves 90% of problems. And if you reboot regularly, it prevents 95% of the problems from happening. Quote Link to comment Share on other sites More sharing options...
titchyblackcat Posted July 10, 2015 Share Posted July 10, 2015 A bit late i know but, i've had this sort of thing with the USB. I use an Axiom, Pod HD and run Cubase and Reason I have to start the software in the correct sequence for it to run OK. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.