nicjimbass Posted July 15, 2013 Share Posted July 15, 2013 Good morning! This past weekend, my G30 receiver suddenly stopped working. Before I pursue getting it serviced, I'd like to see if there is anything I can do. Two weekends ago, it was working fine. I have been using the G30 transmitter it came with, with one bass, and a G50 transmitter I bought seperately with another bass, with no problems. This past weekend, I went to play during soundcheck, and I noticed the transmitter had 3 red LED's lit up on the signal meter, and one flashing red LED on the battery meter, flashing 3 times at a time. I haven't updated the firmware, so I cannot switch between RF1 and RF2, that I know of. Thank you for your help! Nick Quote Link to comment Share on other sites More sharing options...
dboomer Posted July 15, 2013 Share Posted July 15, 2013 Flashing LEDs indicate an error code. You could try updating the firmware which may clear it. If that fails it will probably need to be returned for service. Quote Link to comment Share on other sites More sharing options...
nicjimbass Posted July 17, 2013 Author Share Posted July 17, 2013 Updated the firmware, but still getting the flashing LED. Time for repair. :( Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.