Veefreek Posted July 23, 2015 Share Posted July 23, 2015 Ok so I have a hd desktop. I have a tone set up that's pretty good, but when I come to a pause in the tune it as if there is a reverb on, I have no reverb on this patch, anyone have any idea on how I can stop this? Quote Link to comment Share on other sites More sharing options...
mazuwa Posted July 23, 2015 Share Posted July 23, 2015 What happens if you disable all or some of your fx and amps on your patch? And what about other presets, especially the "New Tone" Preset? Quote Link to comment Share on other sites More sharing options...
silverhead Posted July 23, 2015 Share Posted July 23, 2015 Also experiment with the ER (early reflections) setting associated with your mic selection. This setting can add a reverb-like effect. Quote Link to comment Share on other sites More sharing options...
Veefreek Posted July 23, 2015 Author Share Posted July 23, 2015 Well after adjusting things it turns out either the gate or compressor was the culprit. Made some adjustments and got rid of the issue. I have had all the pods from the 2.0 all the way through the X3 Pro and the Live. None of those units acted like this...hmmm Quote Link to comment Share on other sites More sharing options...
mazuwa Posted July 24, 2015 Share Posted July 24, 2015 Make sure the gate comes before the compressor. The compressor rises the signal up and gets over the threshold of the gate or something like this? Quote Link to comment Share on other sites More sharing options...
joel_brown Posted July 24, 2015 Share Posted July 24, 2015 None of the previous PODs were as configurable as the HD. Hmmmmm..... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.