psaguilera Posted July 29, 2015 Share Posted July 29, 2015 Hello, my POD HD Desktop displays the following malfunctions: after a time stays on, while I'm playing guitar suddenly restarts. Before restarting, they begin to adjust the EQ controls, automatically, though I have selected nothing. Then it restarts again and again, making it impossible to continue using it. Once you've left a few hours off, when turned on again, it works normally, for about an hour. I tried updating the virtual memory through Line6 Monkey, but this has not solved the problem. Any user who knows how to fix the problem, or you may also have happened? Thank You Quote Link to comment Share on other sites More sharing options...
napynap Posted July 29, 2015 Share Posted July 29, 2015 I haven't seen that behavior before, but try disconnecting any FBV foot pedal and plug the power adapter into a different power source to attempt to isolate the issue. Quote Link to comment Share on other sites More sharing options...
titchyblackcat Posted July 29, 2015 Share Posted July 29, 2015 Sounds like the power is going off and on again. Good advice from napynap. Also power up with out the guitar plugged in and see if the unit re-starts. How long is it before the unit re-starts ? Quote Link to comment Share on other sites More sharing options...
joel_brown Posted July 29, 2015 Share Posted July 29, 2015 Check the voltage from your power supply. I had one that kept rebooting itself and the power supply was going bad. Showed low voltage. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.