ccomito1223 Posted July 20, 2013 Share Posted July 20, 2013 Ok guys, I'm sure this has been asked before but I'm not sure if I know the terminology to search the web correctly for an answer. Here's what I have and what I'm trying to do: FBV longboard connected to POD HD Pro then midi out of POD to Voodoo Labs GCX, then custom cable to Peavy 6505 Plus. I am using the GCX as a channel switcher and so far have been unsuccessful. I can press and hold MOVE to access MIDI operations and after assigning FS5 to midi channel 16, Message to CC toggle, CC to 80 (per Voodoo Labs manual) and Value to 127 I can get it to send the signal and change my amp channel. The problem is that I can't seem to get that setting to save for future use. Once I leave the setup screen it does nothing. I can't figure out what I am doing wrong. Is there a save procedure I'm not following? Should I be setting this up differently? Any help is appreciated! Thanks for your time. Quote Link to comment Share on other sites More sharing options...
ccomito1223 Posted July 21, 2013 Author Share Posted July 21, 2013 Ok to answer my own question for anyone else, the stock presets cannot be modified in that way. I copied the preset I like to user one and everything worked and saved with the preset. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.