Variax 600 not detected by Monkey /Workbench

[Overturept]

Hi,

 

one more, i saw various people reporting the same issue but almost had solution and unfortunally i didn't..

 

I have a Variax 600 and works fine, and i bought the XPS, TRS Cable and the USB interface.

When i connect the variax to the interface and interface to computer both leds blink green and the interface is detected, the variax isn't.

I've tried with other computer, other USB port's, other OS's and nothing.

Tried with batteries and XPS, only batteries, only XPS various combinations and with no success.

I've opened the guts and made continuity test's between the RJ interface on the guitar with the cable connected to the other end of the USB interface wich seems that the problem isn't of the both connectors and the cable.

I've saw a pinout diagram to connect the guitar to the computer via RJ-MIDI, i did the piout but nothing, but i dont know if anyone tested and if anyone did, can provide me the diagram of midi to ethernet just to confirm i did it right.

 

Anyone have more ideas?

 

Regards.

[psarkissian]

Hardware issue, needs to be troubleshooted at a Line 6

authorized service center.

[Overturept]

It was the USB interface problem.

 

Thanks.

[G1HGD]

I have just bought a Variax 600 and have the same problem as descibed above. What was the cure in the end? Do i need to send the USB box back?

Thanks.

Mike.

[psarkissian]

Don't use a USB hub device. Just the Variax interface device alone.