FreePadz Posted July 23, 2013 Share Posted July 23, 2013 OK, simple scenario. -Two acoustics; one plugged into 'guitar in'; one plugged into AUX in. -Add two clean amps and BINGO: guitar 1 comes out of left speaker; guitar 2 come out of right speaker. Everything's OK. What's the problem? In this application I don't want any amp modelling, and when I disable the modeled amps, now guitar 1 is in both speakers and guitar two is in both speakers. This is extremely frustrating and has been driving me crazy! All i have is a little reverb at the end of the chain. PLEASE can someone help me! Quote Link to comment Share on other sites More sharing options...
phil_m Posted July 23, 2013 Share Posted July 23, 2013 Sure, it can be done. You just have to create a dual tone with Path 1 and 2 completely separated and hard panned at the mixer block. I'd start off with something like this. Just don't put anything in the amp blocks. Quote Link to comment Share on other sites More sharing options...
FreePadz Posted July 24, 2013 Author Share Posted July 24, 2013 Thanks. Tried you suggestion and it worked. Thing is when i move the blank effects blocks back into the 'single' pre-amp tone path, I was still getting a panned output. I could no longer replicate the problem... Hmmm Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.