aehn Posted April 28, 2013 Share Posted April 28, 2013 The green light light up on the POD studio GX interface when computer starts up. Everything is fine. I launch Pod farm program. So far so good. I shut down Pod farm program. I decide to later launch Pod farm again, and the green light shuts off, and the POD studio GX interface somehow gets disconnected. Why? Quote Link to comment Share on other sites More sharing options...
TheRealZap Posted April 28, 2013 Share Posted April 28, 2013 i would check your power management and see if its set to sleep your usb ports after a while. Quote Link to comment Share on other sites More sharing options...
aehn Posted April 29, 2013 Author Share Posted April 29, 2013 i would check your power management and see if its set to sleep your usb ports after a while. No it is not that. Today, I cant even get any sound from it. !?!? The green light randomly shuts off, and I have to reboot the computer. Lately, The green light shuts off immediately when I launch Pod Farm software. And during all this time, I have not been able to hear any guitar signal coming through the interface. The cable is good, the connections are tight. There is no sound registered on the input meter, I chose GX input device. What is happening!? Quote Link to comment Share on other sites More sharing options...
Triryche Posted April 29, 2013 Share Posted April 29, 2013 Run the newest version of Monkey to make sure everything is current. http://line6.com/software/ I would also try a different USB cable just to be sure. Quote Link to comment Share on other sites More sharing options...
BigChas52 Posted April 30, 2013 Share Posted April 30, 2013 Trying a different USB cable is definitly worth the effort. Last week I bought myself a high end recording software package. It came with a nice interface. I spent 48 hours trying all sorts of fixes, crashed my computer several times, and nearly lost data. The end result was, the new USB cable that they sent with the rig was bad. Oddly enough, I was getting sound through the cable via ASIO, but I couldn't control the interface or change presets via my PC. As soon as I changed the cable everything started working just fine. 1 Quote Link to comment Share on other sites More sharing options...
aehn Posted April 30, 2013 Author Share Posted April 30, 2013 Ok, thank you, will try to change the USB cable and see if it gets better. Quote Link to comment Share on other sites More sharing options...
toneman2121 Posted April 30, 2013 Share Posted April 30, 2013 Trying a different USB cable is definitly worth the effort. Last week I bought myself a high end recording software package. It came with a nice interface. I spent 48 hours trying all sorts of fixes, crashed my computer several times, and nearly lost data. The end result was, the new USB cable that they sent with the rig was bad. Oddly enough, I was getting sound through the cable via ASIO, but I couldn't control the interface or change presets via my PC. As soon as I changed the cable everything started working just fine. sometimes it;s the simple things Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.