mjones53 Posted July 28, 2013 Share Posted July 28, 2013 Hello, I have only had the unit a week and tonight HD Edit crashed and then after I rebooted the volume pedal is 100 wide open in every patch i made and no longer works. I have found and went through the calibration several times but, when you get to the press "c" part the value never changes. Please anyone have any ideas? not a happy camper at all right now. I'm on the latest firmware as well. Thanks Quote Link to comment Share on other sites More sharing options...
mazuwa Posted July 28, 2013 Share Posted July 28, 2013 My idea is that if it is because the crash the reason might be that the firmware also crashed. Save your patches. Then first try a global reset and then calibration. If it fails then reflash and reset and calibrate. But sometimes it is independent from the crash and the sensor is covered by dust. Maybe you can blow into the hole under the pedal stick. Quote Link to comment Share on other sites More sharing options...
mjones53 Posted July 28, 2013 Author Share Posted July 28, 2013 thanks, i did a reflash and the global reset and recalibrate and it works now but, the off value will only go to around 24 and the max 255, can't get it back to zero (off) Quote Link to comment Share on other sites More sharing options...
mjones53 Posted July 28, 2013 Author Share Posted July 28, 2013 update, after a second calibrate it is working again as it should thanks again Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.