Howardguitars Posted December 29, 2015 Share Posted December 29, 2015 I have a HD500 and was wondering if there is a way to set the default view on the LCD as the performance view? My old eyes cant see the signal flow view that well..... Thanks. Quote Link to comment Share on other sites More sharing options...
AlexKenivel Posted December 29, 2015 Share Posted December 29, 2015 press the view button until it comes up and it will hopefully stay that way, and then when posting try to press enter before hurghanico does :P 1 Quote Link to comment Share on other sites More sharing options...
AlexKenivel Posted December 29, 2015 Share Posted December 29, 2015 Wow, I almost forgot how stereotypically racist those old Speedy Gonzalez 'toons were! Quote Link to comment Share on other sites More sharing options...
pfsmith0 Posted December 29, 2015 Share Posted December 29, 2015 Oh, it wasn't just those. Over Christmas I was watching an old Fred Astaire movie and he had a scene in "black face". Wouldn't see any of that nowadays, And Hollywood prided itself in how liberal and inclusive they were.... Quote Link to comment Share on other sites More sharing options...
AlexKenivel Posted December 29, 2015 Share Posted December 29, 2015 the specific funny clip I posted above doesn't have any racist content.. Maybe not so much to those who don't live in America, but sneaking across the border to get some cheese and come back to bring it to your family while trying to avoid being caught sounds a little familiar. don't get me wrong, I am NOT trying to insinuate that you are racist at all. simply just a realization and observation Quote Link to comment Share on other sites More sharing options...
FlyingSquirrel Posted December 30, 2015 Share Posted December 30, 2015 there isn't any specific setting, but if you turn off the POD while in performance view, that one will be the mode on LCD when you'll turn it on again Get it to the view you want, then hit save, then power down. When you power up again, it should be defaulted to your new selection. Quote Link to comment Share on other sites More sharing options...
FlyingSquirrel Posted December 30, 2015 Share Posted December 30, 2015 the "save" button saves the patch in its current state (cursor position included), but doesn't save the display view mode (Signal Flow View, Big User View, or Performance View).. but as I said before, when the POD is powered on it stays in the same view mode used before powering off, it is not a per patch setting which can be saved, it's a general behaviour Funny, it's working for me. I changed it to performance mode, hit save. Powered down, powered back up, it's in performance mode, no matter which bank and/or preset I hit. Quote Link to comment Share on other sites More sharing options...
FlyingSquirrel Posted December 30, 2015 Share Posted December 30, 2015 ok, please do this experiment: - change view mode - don't save - power off - power on which is the mode you see on LCD? I changed from Big User to Performance mode as you suggested. didn't save. powered off. powered on. opens to Performance Mode. switched it to Big User didn't save powered off powered on opens to Performance mode my preference is Big User, so I switched it to Big User didn't save it powered off, powered on opens to Big User, changing banks and presets remains on Big User. Quote Link to comment Share on other sites More sharing options...
davidb7170 Posted December 30, 2015 Share Posted December 30, 2015 Yup - mine stays in the last display state I left it in, without a specific save. Both my 500& 500X have always been this way, through all FW revisions, etc. Just adding to the points of data, here. Dave Quote Link to comment Share on other sites More sharing options...
duncann Posted December 30, 2015 Share Posted December 30, 2015 I think the intended behavior is for it to save its state. My unit does this also, but not predictably. Sometimes it does, sometimes it doesn't... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.