wakaii Posted December 31, 2015 Share Posted December 31, 2015 Greetings guitar freaks, the volume on my x3 live would still be on even the pedal is pressed towards min and it happens on all patches on my x3 live. I need to use the volume of my guitar to shut volume. all settings on patches are set 0(min) and 100(max) and can't figure any other way to set the volume. It will be very much appreciated if you can help me. thanks Quote Link to comment Share on other sites More sharing options...
shredjsx Posted December 31, 2015 Share Posted December 31, 2015 Somehow the volume pedal is turned off... Check in your system IO and see if it's a setting in there Quote Link to comment Share on other sites More sharing options...
BillBee Posted December 31, 2015 Share Posted December 31, 2015 It could be that the pedal's board is shot. Which I do believe a replacement is not a bank breaker but until then: Q: How do I calibrate the Expression pedal on the POD X3 Live?A: 1. Go to test mode by holding down 'Right' on the directional pad when you power up.2. Highlight Pedal Cal.3. Press the INPUTS button.4. Set the pedal to the heel position.5. Press the A footswitch to get data on pwm duty cycles.6. Set the pedal to the toe position.7. Press the B footswitch to get data on pwm duty cycles.8. Press the C footswitch for automatic selection of the best duty cycle.9. Move the pedal to get smooth 0-255 Scaled Values.10. Press the D footswitch to save the settings. 1 Quote Link to comment Share on other sites More sharing options...
wakaii Posted January 1, 2016 Author Share Posted January 1, 2016 thanks shredjsx and billbee, I'll try both your advice when I get home. Happy new year! cheers.. Quote Link to comment Share on other sites More sharing options...
wakaii Posted January 1, 2016 Author Share Posted January 1, 2016 Thanks again guys, my volume/wah pedal is now working as suppose to. keep shredding. Quote Link to comment Share on other sites More sharing options...
shaunlacanne Posted June 29, 2017 Share Posted June 29, 2017 Hello everyone. I have the POD X3 and it is spiking in volume and lowering automatically. All over the place. Up and down as I'm playing and used to do it here and there before but it's doing it much more now. Doe anyone know about this and can anyone help me?? Thank you! Quote Link to comment Share on other sites More sharing options...
lefty940 Posted March 5, 2020 Share Posted March 5, 2020 I Just calibrated my pedal and cured my problem thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.