emmebbi Posted February 14, 2016 Share Posted February 14, 2016 Is it possible to connect two M13 using send/return jacks to have 8 fx at once? Quote Link to comment Share on other sites More sharing options...
phil_m Posted February 15, 2016 Share Posted February 15, 2016 Yes, that would be a possibility, but it would certainly take up a lot of floor real estate. You might want to look at using the HD500X instead. That will let you have up to 8 effects in a preset. It wouldn't be double the DSP power of one M13, but unless you're planning on using multiple instances of DSP-intensive effects, you should be OK. Quote Link to comment Share on other sites More sharing options...
emmebbi Posted February 15, 2016 Author Share Posted February 15, 2016 I like very much the M13 concept of different stomp boxes instead of presets... Ok, I'll ceck the space :-) Thanks very much Quote Link to comment Share on other sites More sharing options...
mylesloud Posted June 11, 2016 Share Posted June 11, 2016 emmebbi, I use two m13's, but I run one in the fx loop of the amp with time based fx like delay, etc. , and the other one in front of the amp with compression, overdrives, etc. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.