Recommended Posts
fflbrgst 1,844
Have you tried a manufacturer reset? With the power off, hold the A button in while turning the power on, keeping it held in for 5-8 seconds. If this doesn't help, then you will need to bring the amp to an authorized service center for evaluation.
hello. Yeah, I've tried that and it doesn't do anything. thanks anyway.
Did you ever get this fixed? Mine did the exact same thing the other day. I bought it about two months ago so its under warranty.
fflbrgst 1,844
If the factory reset doesn't help, return it for replacement/fix.
BillBee 393
i had this problem then it turned into this...
any ideas? :(
20170330_121124.jpg
Its called a trip to the Service Center. Black Squares are never good. If you can't get a reflash to take it has to go back to the mothership.
Im not sure if there "is" a service center where I live (Rio de Janeiro).
Update firmware wont help?
fflbrgst 1,844
You can try a factory reset.
You can try firmware update (Line 6 Monkey won't do anything but update).
For warranty/repair: http://line6.com/support/warranty-repair/
There is only one location shown in Brazil, in Sao Paulo.
Im thinking about the update but i want to be sure that it will help, before I buy a FBV
ps: factory reset doesnt work
ronnie28 0
A mi me pasa lo mismo como lo solucionastes
ronnie28 0
Hola como lo reparastes
psarkissian 316
Black box display,... the main board needs to be replaced by a Line 6 authorized
service center. Make certain the product is registered and then log a support ticket
to get the process going.
harv1944 0
Had the same problem on a spider iv 150. Turned out to be the 3.3v rail reading 2.6v only. replacing the regulator chip cured it but it does require board level repairs. Not advisable whilst under warranty
psarkissian 316
harv1944,... you got lucky, usually, it isn't that. That is a rare one.
On 8/10/2017 at 11:05 AM, harv1944 said:Had the same problem on a spider iv 150. Turned out to be the 3.3v rail reading 2.6v only. replacing the regulator chip cured it but it does require board level repairs. Not advisable whilst under warranty
what is regulator chip´?
psarkissian 316
Black box display,... has to go to a Line 6 authorized service center. It is not a self repair thing.
I was playing with my spider iv 75 and suddenly it stopped and the panel went crazy as you can see in the picture. I can't change anything. Any solution for that?
thanks
Share this post
Link to post
Share on other sites