Nico_6 Posted February 17, 2016 Share Posted February 17, 2016 Hi!I just bought the Uno chip for my FCB1010 to control stompboxes on my unit (Pod Hd Pro X).I actually have the advanced manual for the Pod Hd Pro X and the edit software...i also have the Uno manual but unfortunately, even if i tried several times (also looking for some tutorials on the web) i haven't been able to set it up correctly... (and this is quite frustrating <_< )Could please someone help me maybe with a step-by-step guide on how to configure it?Many thanks in advance to everyone!Nick Quote Link to comment Share on other sites More sharing options...
BillBee Posted February 18, 2016 Share Posted February 18, 2016 Hey my man! http://line6.com/support/topic/2677-pod-hd-pro-fcb1010-midi-foot-controller/ I've used the FCB1010 (Eureka rechipped IIRC) with an XT Pro and Pod Pro but its been years and I don't have a HD Pro (yet).... so I had to pop a link for you. Find the HD midi chart and there should be a section in the manual if you need to set any variables nab the FCB Editor. Midi goes in/out and out/in usually. Quote Link to comment Share on other sites More sharing options...
Nico_6 Posted February 18, 2016 Author Share Posted February 18, 2016 Hey my man! http://line6.com/support/topic/2677-pod-hd-pro-fcb1010-midi-foot-controller/ I've used the FCB1010 (Eureka rechipped IIRC) with an XT Pro and Pod Pro but its been years and I don't have a HD Pro (yet).... so I had to pop a link for you. Find the HD midi chart and there should be a section in the manual if you need to set any variables nab the FCB Editor. Midi goes in/out and out/in usually. Hi! Many thanks for your reply :) I already checked the topic you linked before asking...i'll probably try with the FCB1010 Uno editor software and see if i can achieve a good result.. Actually the problem is that i have the list of the cc of Pod Hd Pro X (ex. FS1 = CC51) but the unit doesn't "communicate" correctly with the FCB even if i send the same CC value with the switch...can't understand why actually but i hope the editor will help to set everything more easily. Quote Link to comment Share on other sites More sharing options...
BillBee Posted February 18, 2016 Share Posted February 18, 2016 Cool, I think that will be the way forward for ya. Just remember "out" from the FCB to the "in" on the HD. Years ago I was banging my head until I realized that. :) Quote Link to comment Share on other sites More sharing options...
Nico_6 Posted February 18, 2016 Author Share Posted February 18, 2016 Cool, I think that will be the way forward for ya. Just remember "out" from the FCB to the "in" on the HD. Years ago I was banging my head until I realized that. :) Hi! Yes, the connection is not a problem, i have the FCB since different years, the only thing i think that i could have done wrong is programming the FCB with the Uno chip maybe...! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.