Jump to content
Digital_Igloo

Question for the Forum About Wireless Variax

Recommended Posts

One thing to remember is that, while the VDI uses an Ethernet cable, it's not operating as a lan system using packet protocol. They used it for the 4 pairs of conductors. One pair for power, one pair for control (Variax to pod or helix and back to control the Variax), one pair for digitized mags, and one pair for digitized model/mags. The digital guitar signal is more akin to spdif streaming, not lan packet traffic. Numerous users have tried to use compute lan equipment and found it not to work, so WiFi is not going to work either, as all that is is an rf translation of the lan packet protocol...

 

Power transmission is out with rf, the Variax battery would be needed to power the guitar end, so you'd still need 3 rf paths for bidirectional control and 2 paths for digitized audio streams, though they may be able to multiplex 2 into 1 transmission. This would be the way to get the same functionality of the VDI via a wireless system. Can it technically be done? Yep, but not cheaply. Not surprised at the $1k likely price range.

 

Dave

Share this post


Link to post
Share on other sites

And WiLAN (Wireless Local Area Network for the uninitiated) typically uses I/Q, with

the quadrature (Q-signal) signal phase at 90-degrees with a +0 to -3 degree tolerance range.

Very good Dave.

 

Taking the wireless packs and sub-planting them into a guitar is not so easy. 

 

The mod connector (RJ45) is also used for updates through Monkey and Workbench HD,

which would complicate things even more.

 

Nice idea, but there would be hurdles to be overcome first before something like that would be doable.

Share this post


Link to post
Share on other sites

I would be interested.  I think 1K for a VDI wireless is on par with most pro wireless systems today.   If I was gigging (and I will be again soon), it would be a must.  

 

It would also be great to have one extra audio channel to plug in a headset mic.  Now before you role your eyes... it just needs a body pack you can plug a mini-xlr into.   I always hated having to wear two body packs.

Share this post


Link to post
Share on other sites

I would love to see one of these brought to market. The $1,000 price point is tough, though. I might go in at that price, but I am not sure it would get widespread market acceptance at such a high price point. At $500 to $600, I think it would be a hit. For more than Variax Standard or a Helix LT? That's a tough sell.

Share this post


Link to post
Share on other sites

Too bad it's two audio channels from the guitar and one back channel vs the other way around. In that case, it could also do stereo IEM + guitar wireless.

Share this post


Link to post
Share on other sites

I would love to see one of these brought to market. The $1,000 price point is tough, though. I might go in at that price, but I am not sure it would get widespread market acceptance at such a high price point. At $500 to $600, I think it would be a hit. For more than Variax Standard or a Helix LT? That's a tough sell.

Indeed... it's like buying the old Duster that's been rotting in Gramps' driveway for $300, then putting $2K worth of rims and tires on it. ;) I'll pass...

  • Upvote 1

Share this post


Link to post
Share on other sites

I use a low latency BT interface between my ear monitors & studio monitors (which works very well btw), and I've often thought about how liberating a wireless VDI would be. But $999 is hardly worth it for home/studio use. On the other hand, for on-stage use paying gigs would justify the cost.

✔ï¸

Share this post


Link to post
Share on other sites

In a perfect world sure bring on the RF...  

 

$1000?  It better work FLAWLESSLY in RF dense environments.

Share this post


Link to post
Share on other sites

In a perfect world sure bring on the RF...

 

$1000? It better work FLAWLESSLY in RF dense environments.

Fear not... they ain't making it anyway, lol. ;)

Share this post


Link to post
Share on other sites

So now, 2 years later, can we make this happen for sub $500?

 

... Or will the gen 3 models have built in wireless?

 

Inquiring minds want to know

Share this post


Link to post
Share on other sites

I seriously doubt we're going to get built in wireless with gen 3 Variax. I'm actually keeping my gen 3 expectations low, so I'm not too disappointed. Any improvements over the JTV, which are pretty good in my opinion, will be welcomed by me. I'd love wireless. I'm not sure how much I'm willing to pay though. Most of my gigs have limited space and wireless would be wasted. 

Share this post


Link to post
Share on other sites

So now, 2 years later, can we make this happen for sub $500?

They don't invite me to the R&D meetings, but I'm gonna go ahead and guess a big fat "no"...

Share this post


Link to post
Share on other sites

So now, 2 years later, can we make this happen for sub $500?

 

... Or will the gen 3 models have built in wireless?

 

Inquiring minds want to know

The inquiring minds will find out at the exact same time as the completely indifferent minds...with the official press release. Remember, recommended pickup height is "007" stuff around here. 😂

 

And while they certainly don't invite me to the R&D meetings, I'm gonna go ahead and guess a big fat "no"...

Share this post


Link to post
Share on other sites

I know, just being a smartass.

 

If my choice is wireless or vdi, I'm going vdi

Share this post


Link to post
Share on other sites

The second Line6 goes wireless with their Variax system, I'm throwing my old 4000 bucks rack out the window and getting a Line6 rig instead. I love the Variax guitars, but my set-up (patch switching etc.) is heavily automated via MIDI and wireless. I set it up this way to get rid of the friggin cables and not to be forced to tip-toe on my pedal board every couple of seconds. No way I'm going back to wired set-ups... Don't give a damn about the price point. Heck, I'd even pay good money for any third party solution to this problem.

Share this post


Link to post
Share on other sites

I would probably pay something slightly above 500$ for wireless VDI as soon as I started gigging with my Variax.

Honestly, 1000$ seems to steep, in particular because that would make it more expensive than many Variax models themselves.

Share this post


Link to post
Share on other sites

Throwing cash at the screen isn't working :( I would pay 1000 for this.

Share this post


Link to post
Share on other sites

@Digital_Igloo I do not get it. Why not simply use the G10 or any other relay system for audio separately and just develop a separate wireless solution ONLY for the control communications of the VDI? even better, move to standard MIDI an use one of the existing solutions around (Yamaha, Quiccosound)?

 

No need to make a do it all device that would not be price appealing. Granted, the VDI interface can do a lot, but I bet that most of the players that demand a wireless solution for VDI and are forced to be tethered, they only look for a way to control the Variax remotely and take benefit of the wonders of added control.

 

I myself are a user too of a now discontinued Antares Auto-tune for guitar (similar to Variax) whereas I run full Wireless. I use my trusty G10 for audio (models and passive) and use Wireless BTLE MIDI (bidirectional) for the control, changing presets, models, turnings, even firmware upgrades and programing. it works simply flawlessly in conjunction to a MIDI foot controller and the cost was:

$50 for the BTLE MIDI on the guitar (Quiccosound mi.1)

$50 for BTLE MIDI for the foot controller (CME Widi-Bud)

$100 for a USB host to MIDI adaptor (Primova MIDX20)

$150 for the L6 G10 

Total: $350

 

And even better, Quiccosound is about to release the mi.1 pro version that can connect directly to another unit allowing to spare the USB host and Widi-Bud. So potentially less that $300 and you know what, it can also connect to Android, iOS, MAC, Windows. Imagine Workbench in your phone?

 

Reach out to me if you want further details and pictures of how I am doing this.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×