jamminforever 2 Posted August 11, 2013 OK, I'm pretty much fed up with the POD 500 I have here. I'm using this thru a Mesa Mark V head for effects only, via the 4 cable method. When the POD500 was setup, it was working great, no problems, except the occaisional distortion that I've posted about before in here. Now the problem is that when I engage the effects loop, via my mesa foot switch, my chorus started sounding warbly, like some weird sonar-radar effect.... Then later I've gotten some nasty loud squeals. Please keep in mind,sometimes it works properly, then it does this... It works just fine again, then does it again..... I'm pretty much fed up with this. Has anyone here had anything like this happen to them? Is there something I'm missing. I love having the 4 cable method... but will the wah sound any different thru the loop? Perhaps I should ditch the 4 cm? Quote Share this post Link to post Share on other sites
jamminforever 2 Posted August 13, 2013 Anyone? Quote Share this post Link to post Share on other sites
spaceatl 1,975 Posted August 13, 2013 nasty loud squeals....hmmmm.....how old is the glass in that amp....A lot of glass in there... Quote Share this post Link to post Share on other sites
stumblinman 200 Posted August 13, 2013 Check tube v6, as I believe that's the effects loop return tube. Throw a spare in and see if it goes away. Quote Share this post Link to post Share on other sites
jamminforever 2 Posted August 14, 2013 I just got that amp brand new, last November.... I can see how it may be that V6 tube. It wouldn't hurt to change it out and see.... Thanks guys, will try it... Quote Share this post Link to post Share on other sites