musicimpossible Posted April 26, 2016 Share Posted April 26, 2016 For my DAW the signal flow works fine as the following into a Pro Tools track: Guitar > Helix SPDIF Out > In Eleven Rack SPDIF> Eleven Rack USB > IMAC > ProTools. But when I add my Joe Meek Pre into the first part of that chain and then go into the Helix SPDIF in - no signal. Not even a signal into my Helix headphone out. I have SPDIF selected on the HELIX global settings at 44.1 which is what is selected on the Joe Meek. Any help appreciated. Quote Link to comment Share on other sites More sharing options...
duncann Posted April 26, 2016 Share Posted April 26, 2016 Be sure to select SPDIF for the input in the preset. Quote Link to comment Share on other sites More sharing options...
musicimpossible Posted April 27, 2016 Author Share Posted April 27, 2016 Be sure to select SPDIF for the input in the preset. Sorry to be stupid but cannot find the input function on the preset. Please be specific on where that is. Thx Quote Link to comment Share on other sites More sharing options...
duncann Posted April 27, 2016 Share Posted April 27, 2016 It's the input block, or circle, on the left of the screen. In a blank preset there's two of them. The one on the bottom left (Path 'B' has an X through it (no input). The top one (Path A) is probably the one you want to change (default is Multi (Guitar, Aux, Variax). Select it and turn the joystick until it says S/PDIF on the bottom section of the screen, or depress the joystick to see a list of available options and then turn the joystick to scroll through and select each options. Quote Link to comment Share on other sites More sharing options...
musicimpossible Posted April 27, 2016 Author Share Posted April 27, 2016 It's the input block, or circle, on the left of the screen. In a blank preset there's two of them. The one on the bottom left (Path 'B' has an X through it (no input). The top one (Path A) is probably the one you want to change (default is Multi (Guitar, Aux, Variax). Select it and turn the joystick until it says S/PDIF on the bottom section of the screen, or depress the joystick to see a list of available options and then turn the joystick to scroll through and select each options. So close yet so far away. Should have seen that in the manual (which I did read!). Thx D Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.