
Playing Mp3/ Cd Device On Dt Amp
By
Ronco46, in DT50 / DT25
Recommended Posts
Crusty_Old_Rocker 2,556
You should be fine if using line level. Headphone output would be too hot especially if the volume is set high.
Cheers,
Crusty
Ronco46 1
You should be fine if using line level. Headphone output would be too hot especially if the volume is set high.
Cheers,
Crusty
Ok, so if I have the CD player allways set with low volume I should be fine? How about if I plug it into POD HD CD input and then connect left unbalanced output to DT amp FX Loop Return... Does it give me some kind of extra protection?
Thanks!
Hello everyone!
I read somewhere in this forum that DT Amps don't have a CD/mp3 input. That's right! But... since FX Loop Return is an analog input directly to DT power amp, I can connect a CD/mp3 player jack right there (if I don't need it for the 4 cable method) and i t works fine for jamming along a backingtrack (I've done it).
Very important question: Am I damaging anything in DT amp?
Thank you for your time.
Miguel
Share this post
Link to post
Share on other sites