moieez Posted May 20, 2016 Share Posted May 20, 2016 Guys, I have an Hd 500 and dont know how to use the looper function. Can anyone tell me how to use it. Sorry for asking a stupid question. Quote Link to comment Share on other sites More sharing options...
Punkyboy Posted May 20, 2016 Share Posted May 20, 2016 press one time the looper button The looper is activated: Press A to record and immediately B to let's play the loop Press A again to overdub, press A again to stop the overdub Press B to stop the loop Press B to restart the loop Press C for half speed or full speed (press for full speed Before you begin give you a 48 sec loop time 1/2 give you a 24 sec) The looper on your screen must be to the end of the chain(right on the screen) Cheers Quote Link to comment Share on other sites More sharing options...
silverhead Posted May 20, 2016 Share Posted May 20, 2016 ..... The looper on your screen must be to the end of the chain(right on the screen) Cheers That's the most common use of the looper, I think. That way the looper records the processed signal so the playback always sounds like it did when you recorded the loop. However you can also put the looper at the beginning of the signal chain. This records the dry (unprocessed) signal. On playback the dry signal is fed into the beginning of the signal chain and is then processed by whatever preset is being used for the playback. This is very useful for tweaking your tones/presets. Record something, start the playback, put your guitar down, and use your hands to edit the tone while hearing the changes immediately as you make them. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.