wlynes Posted August 23, 2016 Share Posted August 23, 2016 I would like to play audio from my smartphone, through the Pod x3, along with my bass while rehearsing. I bought an XLR to 3.5mm cable to hook the phone up to the Pod x3. I have S/PDIF coaxial cable running out from the Pod x3 to a stereo integrated amplifier. I have held down the Tone 2 button so that both Tone 1 and Tone 2 are listed at the top of the screen at the same time. I think this means I should be hearing both at once. When I configure Tone 1 to be from the Mic (XLR) input, I can hear audio from my smartphone just fine. However, when I configure Tone 2 to be from the Mic input, I don't hear any audio from the smartphone. Curiously, if I turn the trim knob up, the Clip indicator lights up intermittently, but no audio. I have also checked my Output settings, they're set to Match Studio/Direct via S/PDIF. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.