Mgregory623 Posted August 28, 2016 Share Posted August 28, 2016 I think I have it setup right. I have the L/R xlrs hooked up and send 1 to the firehawk. I then added a send block. But any effect I put after the send sounds weak. I did bump the mix up to 100% and that made alil difference. Is there a trick. Quote Link to comment Share on other sites More sharing options...
spikey Posted August 28, 2016 Share Posted August 28, 2016 I sent both XLR's to the monitor inputs on my Firehawk 1500. The 1/4" jacks I sent to the Mixer. That audio from the Mixer can goto many places including my Apollo interface. I do not use Helix as an audio interface as many do. Quote Link to comment Share on other sites More sharing options...
vmoncebaiz Posted August 29, 2016 Share Posted August 29, 2016 I think I have it setup right. I have the L/R xlrs hooked up and send 1 to the firehawk. I then added a send block. But any effect I put after the send sounds weak. I did bump the mix up to 100% and that made alil difference. Is there a trick. I'm not exactly sure how you have it set up. Send 1 is going to the Firehawk monitor in? And the XLRs are going where? Generally, I've just run XLR left and right into the monitor in of the Firehawk1500. It will give you some stereo imaging from a single source, and plenty of volume. Unless there is something specific you are trying to set up, I think most people run it like that. Let me know if there is something else you are looking to make happen. Quote Link to comment Share on other sites More sharing options...
Mgregory623 Posted August 29, 2016 Author Share Posted August 29, 2016 Yes that's how I have mine setup. I just feel that the effects after the send block seem weak and better if it's before. I have just delays after it now.modulation and reverb sound way better before than after even the delay is eh . Which effects do you put after the send block? Do you boost the volume for the effects you use after? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.