moff Posted August 31, 2016 Share Posted August 31, 2016 I have a mono Eleven Rack rig where I want to run three FX in the loop: the two FX before the M9 should be fed by the two loop outs (when set to mono, the loop should output the same signal at both outs) and run in parallel. Can I take the mono out from each of those FX, plug one into the L M9 input, the other into the R input, use the M9 for (mono) delay, rotary, etc, and sum it all to one mono out? Or more simply, can I go into both of the M9's inputs and still use mono FX, and then come out single mono? I could do it with Y-cables, but would rather avoid that if possible... Quote Link to comment Share on other sites More sharing options...
moff Posted September 27, 2016 Author Share Posted September 27, 2016 Just in case anyone was following this question, yes, it appears to work as I suspected; you can go in with signal on both the left and right inputs and then sum them to mono using the left/mono output. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.