Jump to content
Sign in to follow this  
Mpranger90

Return 1 and 3 not functioning?

Recommended Posts

Ladies and gents!

since a week ago i am a proud owner of a Line 6 Helix! but when i was fiddling around with the internal routing, i noticed that the first and third return are not functioning, the 2nd and 4th are working (i tested this by playing music with my phone through a mini-jack -> 6,3 adapter.)

Is my hardware faulty? or is it a internal/software setting that must be adjusted? i hope you guys can help me out with this issue!

with best regards,

Milton

Share this post


Link to post
Share on other sites

The Send/Return pairs on the rear panel are aligned differently than on most devices. Double check the jack labels and make sure that you are not actually using the Send jacks rather than the 1 and 3 Return jacks.

Share this post


Link to post
Share on other sites

There are also Global settings for signal level which may play a part. You can use send/return separately and different ones or just use the combination loop send/return in mono or stereo configs. I would be surprised if the unit was not working right. I am sure L6 would effect repairs asap if this is so, 

Share this post


Link to post
Share on other sites

Okay, i already figured it out, the problem was that i was approaching this with a sound engineer's point of view.

normally the sends are  on the top and the sends are on the bottom. i made a preset patch with returns blocks and tested all the inputs, and it works flawlessly like it should!

thanks for the replies and the support!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×