Jump to content
Sign in to follow this  
tochiro

Losing volume on my amp using the 4-cable method

Recommended Posts

Hi,

 

I have an amp with an FX loop and used this method to connect the HD500:

Guitar > Pod guitar in Pod effects loop out > Amp guitar in Amp effects loop out > Pod effects loop return Pod unbalanced out > Amp effects loop return (power amp in)

It's working but I lose much volume on my amp.  The HD500 Master volume is of course full on.  How come?  Thank you.

 

Cheers

Share this post


Link to post
Share on other sites

The HD guitar input is really an interface preamp and not a real guitar input so the pedals before it wont be as good.

You could try the Aux input instead or the pedals in the FX loop out then to the guitar input on the amp.

Share this post


Link to post
Share on other sites

The output level on the Pod can be boosted by turning it up to line level (switch on the top).   But the Pod loses level internally and there are some tricks to compensate for that.

 

I don't use my HD500 anymore and don't swing by here often.   They 'revamped' this site so I  have no Idea where anything is but sometime back I wrote a guide that describes how to get good levels with the HD500 in 4CM.

 

There is a copy of it here, optimised for the Marshall JVM, here.  http://jvmforum.com/phpBB3/viewtopic.php?f=34&t=5333

 

HTH

 

JIM

Share this post


Link to post
Share on other sites

A little decrease of volume is natural when using the FX SEND/RETURN of the POD... I'm not sure how exactly you are connecting the external pedals but you can try to connect them like this:

 

Share this post


Link to post
Share on other sites

I was unclear I think - I have no external FXs.  I'm just trying to connect the HD500 to my amp loop.

Share this post


Link to post
Share on other sites

The FX loop has to have its levels adjusted and be sure to adjust its mix <- crank it to 100% and see what it does. There are some really good archived threads here going through various amps and the 4CM. Google 4CM Pod HD FX Loop Volume and you will have more info then you thought.

 

BTW Jim's guide is really good (I have plagiarized before too - Thanks Jim!) :)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...