HonestOpinion Posted November 22, 2016 Share Posted November 22, 2016 Important note ye Helix users. After you backup your presets and IRs and update your firmware and run the global reset (FS 9&10 on the floor version) and do a restart make absolutely sure to shut the Helix down and restart it one more time before you start tweaking your presets. You will notice that the first time you shut down and restart the Helix after you have updated the firmware, done the global reset, and loaded the presets from your previous firmware version that the screen will show that all the presets loaded from your prior firmware version are being rebuilt. Again, this will happen on the next restart AFTER the global settings reset/restart and the load of your old presets. I don't know if this will impact any presets you have modified in between the firmware update and your second restart but it seems like a good precautionary measure to let your restored presets do their final rebuild before you start changing them. You will also want to back up all your bundle, setlists, IRs, and presets AFTER you do the second restart of the Helix and all of the presets from your previous firmware version have been rebuilt (you can do it before if you want as well). Rule of thumb, make sure you get good backups and don't start changing presets until after you can do a restart and there are no longer any rebuild messages on the screen during the bootup process. 2 Quote Link to comment Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.