Jump to content
Sign in to follow this  
markus506

Can someone confirm 8 scenes multi-color ring LED bug for me? (2.10)

Recommended Posts

So, I posted a bug in the bug thread, regarding having 8 snapshots, and changing the LED footswitch rings to different colors. When I change the display settings for the rings to 'off/bright' from 'dim/bright' the bottom 4 snapshot rings go out (if none are active) but the top 4 stay dim (none are active). I made a brand new patch as well, and I get the same results. I had submitted a ticket, but I got a response that they were not able to reproduce the issue.

 

Note that in stomp mode, the 'off/bright' setting works fine, and all 10 of the stomp switches I use will go out (if none are active). I'm a bit stumped by this, and was hoping someone could take a minute to either confirm or refute my findings.

 

 

Thanks,

 

Mark

Share this post


Link to post
Share on other sites

Regardless of the dim/bright of off/bright setting, snapshot leds are always off, except for the one which is selected. At least that's how it works on mine.

Share this post


Link to post
Share on other sites

Regardless of the dim/bright of off/bright setting, snapshot leds are always off, except for the one which is selected. At least that's how it works on mine.

 

There is a new setting in 2.10 that allows you to set the switch LED ring colors similar to stomp mode.

Share this post


Link to post
Share on other sites

There is a new setting in 2.10 that allows you to set the switch LED ring colors similar to stomp mode.

 

Ok. I see the new feature now. And I can confirm the behavior you observed. Bottom row works fine with the off/dim setting, but the top row doesn't.

Share this post


Link to post
Share on other sites

Yes, I was just about to post on the forum about this but found this post.  I can confirm that if you set the buttons/switches to 8 snapshots, off/bright for the LED Ring brightness and then go in and resave a different color for each switch you will get the bottom row off and then the top row dimmed to whatever color you set it to.  If you change them all back to auto they will all be off/bright as expected.  Seems like a pretty simple bug to miss since snapshot LED colors was a new feature.  I think the test plan should've included testing global setting options.

Share this post


Link to post
Share on other sites

There are a few faults regarding this.

The above LED Dim/Off bug.

Also, if you swap snapshot button positions the assigned LED colour gets left behind and you have to manually change it.

Share this post


Link to post
Share on other sites

Thanks for confirming, guys. I'll point support in my ticket to this thread.

Did you ever hear back again after pointing them to this thread?  This definitely reproduces so hopefully they look into it more.

Share this post


Link to post
Share on other sites

Did you ever hear back again after pointing them to this thread?  This definitely reproduces so hopefully they look into it more.

 

No, I haven't heard anything yet. I am hoping that support will view this thread, and be able to reproduce, because it's a pretty obvious issue.

Share this post


Link to post
Share on other sites

*****

Also, if you swap snapshot button positions the assigned LED colour gets left behind and you have to manually change it.

 

Ouch, thanks for the heads up on that one! Hope it'll get fixed soon..!  

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...