jroseberry Posted January 5, 2017 Share Posted January 5, 2017 Hi Folks, Gearing up for our new Friedman 4x12 Cab IR library, I was doing a few tests and thought I'd share this Cab IR with the forum. For this IR, I used a Royer 121 on one of the Greenbacks. The Royer 121 captures a lot of detail in the upper mids... I positioned the mic about 7" from the cab. Hope you enjoy! www.studiocat.com/temp/R121_7_cone_off_gb.zip 1 Quote Link to comment Share on other sites More sharing options...
roscoe5 Posted January 5, 2017 Share Posted January 5, 2017 Very cool! Thanks for sharing. Probably the only Christmas present you got with a ribbon on the inside ;) Definitely has that cool R121 rumble, but easily adjustable with the Helix IR block low cut if you want to tone it down. 1 Quote Link to comment Share on other sites More sharing options...
jroseberry Posted January 5, 2017 Author Share Posted January 5, 2017 Yeah, mic position is important... If you put the R121 close, the bottom end is thunderous. ;) Quote Link to comment Share on other sites More sharing options...
jbuhajla Posted January 6, 2017 Share Posted January 6, 2017 I like it. I set the low cut to 150Hz and it sounded quite nice and full with the Mesa MkIV channel 2 model on clean/cruch gain and single coils. I'll definitely experiment pairing it with other amp models. Quote Link to comment Share on other sites More sharing options...
Chappie Posted January 14, 2017 Share Posted January 14, 2017 Yeah, mic position is important... If you put the R121 close, the bottom end is thunderous. ;) Hey Jim, Just curious if there has been anymore development on the Friedman cab...that IR with the Royer is really really good! thanks, Chappie Quote Link to comment Share on other sites More sharing options...
jroseberry Posted January 14, 2017 Author Share Posted January 14, 2017 Hi Chappie, Working on it as we speak. :) Gonna take me a little while to get everything together. Slammed with building DAWs... Quote Link to comment Share on other sites More sharing options...
Chappie Posted January 14, 2017 Share Posted January 14, 2017 No Problem, I'll be here when they are done.. B) 1 Quote Link to comment Share on other sites More sharing options...
HonestOpinion Posted January 16, 2017 Share Posted January 16, 2017 Thanks for sharing this! :) 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.